Filtered by vendor Vim
Subscribe
Total
211 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-26603 | 2 Netapp, Vim | 2 Hci Compute Node, Vim | 2025-08-18 | N/A | N/A |
| Vim is a greatly improved version of the good old UNIX editor Vi. Vim allows to redirect screen messages using the `:redir` ex command to register, variables and files. It also allows to show the contents of registers using the `:registers` or `:display` ex command. When redirecting the output of `:display` to a register, Vim will free the register content before storing the new content in the register. Now when redirecting the `:display` command to a register that is being displayed, Vim will free the content while shortly afterwards trying to access it, which leads to a use-after-free. Vim pre 9.1.1115 checks in the ex_display() function, that it does not try to redirect to a register while displaying this register at the same time. However this check is not complete, and so Vim does not check the `+` and `*` registers (which typically donate the X11/clipboard registers, and when a clipboard connection is not possible will fall back to use register 0 instead. In Patch 9.1.1115 Vim will therefore skip outputting to register zero when trying to redirect to the clipboard registers `*` or `+`. Users are advised to upgrade. There are no known workarounds for this vulnerability. | |||||
| CVE-2025-27423 | 2 Netapp, Vim | 2 Hci Compute Node, Vim | 2025-08-18 | N/A | N/A |
| Vim is an open source, command line text editor. Vim is distributed with the tar.vim plugin, that allows easy editing and viewing of (compressed or uncompressed) tar files. Starting with 9.1.0858, the tar.vim plugin uses the ":read" ex command line to append below the cursor position, however the is not sanitized and is taken literally from the tar archive. This allows to execute shell commands via special crafted tar archives. Whether this really happens, depends on the shell being used ('shell' option, which is set using $SHELL). The issue has been fixed as of Vim patch v9.1.1164 | |||||
| CVE-2024-47814 | 2 Netapp, Vim | 3 Bootstrap Os, Hci Compute Node, Vim | 2025-08-18 | N/A | 4.7 MEDIUM |
| Vim is an open source, command line text editor. A use-after-free was found in Vim < 9.1.0764. When closing a buffer (visible in a window) a BufWinLeave auto command can cause an use-after-free if this auto command happens to re-open the same buffer in a new split window. Impact is low since the user must have intentionally set up such a strange auto command and run some buffer unload commands. However this may lead to a crash. This issue has been addressed in version 9.1.0764 and all users are advised to upgrade. There are no known workarounds for this vulnerability. | |||||
| CVE-2024-43790 | 2 Netapp, Vim | 3 Bootstrap Os, Hci Compute Node, Vim | 2025-08-18 | N/A | 5.5 MEDIUM |
| Vim is an open source command line text editor. When performing a search and displaying the search-count message is disabled (:set shm+=S), the search pattern is displayed at the bottom of the screen in a buffer (msgbuf). When right-left mode (:set rl) is enabled, the search pattern is reversed. This happens by allocating a new buffer. If the search pattern contains some ASCII NUL characters, the buffer allocated will be smaller than the original allocated buffer (because for allocating the reversed buffer, the strlen() function is called, which only counts until it notices an ASCII NUL byte ) and thus the original length indicator is wrong. This causes an overflow when accessing characters inside the msgbuf by the previously (now wrong) length of the msgbuf. The issue has been fixed as of Vim patch v9.1.0689. | |||||
| CVE-2025-29768 | 2 Netapp, Vim | 3 Bootstrap Os, Hci Compute Node, Vim | 2025-08-18 | N/A | 4.4 MEDIUM |
| Vim, a text editor, is vulnerable to potential data loss with zip.vim and special crafted zip files in versions prior to 9.1.1198. The impact is medium because a user must be made to view such an archive with Vim and then press 'x' on such a strange filename. The issue has been fixed as of Vim patch v9.1.1198. | |||||
| CVE-2025-22134 | 2 Netapp, Vim | 3 Bootstrap Os, Hci Compute Node, Vim | 2025-08-14 | N/A | 5.5 MEDIUM |
| When switching to other buffers using the :all command and visual mode still being active, this may cause a heap-buffer overflow, because Vim does not properly end visual mode and therefore may try to access beyond the end of a line in a buffer. In Patch 9.1.1003 Vim will correctly reset the visual mode before opening other windows and buffers and therefore fix this bug. In addition it does verify that it won't try to access a position if the position is greater than the corresponding buffer line. Impact is medium since the user must have switched on visual mode when executing the :all ex command. The Vim project would like to thank github user gandalf4a for reporting this issue. The issue has been fixed as of Vim patch v9.1.1003 | |||||
| CVE-2025-53905 | 1 Vim | 1 Vim | 2025-08-14 | N/A | N/A |
| Vim is an open source, command line text editor. Prior to version 9.1.1552, a path traversal issue in Vim’s tar.vim plugin can allow overwriting of arbitrary files when opening specially crafted tar archives. Impact is low because this exploit requires direct user interaction. However, successfully exploitation can lead to overwriting sensitive files or placing executable code in privileged locations, depending on the permissions of the process editing the archive. The victim must edit such a file using Vim which will reveal the filename and the file content, a careful user may suspect some strange things going on. Successful exploitation could results in the ability to execute arbitrary commands on the underlying operating system. Version 9.1.1552 contains a patch for the vulnerability. | |||||
| CVE-2025-53906 | 1 Vim | 1 Vim | 2025-08-14 | N/A | N/A |
| Vim is an open source, command line text editor. Prior to version 9.1.1551, a path traversal issue in Vim’s zip.vim plugin can allow overwriting of arbitrary files when opening specially crafted zip archives. Impact is low because this exploit requires direct user interaction. However, successfully exploitation can lead to overwriting sensitive files or placing executable code in privileged locations, depending on the permissions of the process editing the archive. The victim must edit such a file using Vim which will reveal the filename and the file content, a careful user may suspect some strange things going on. Successful exploitation could results in the ability to execute arbitrary commands on the underlying operating system. Version 9.1.1551 contains a patch for the vulnerability. | |||||
| CVE-2025-24014 | 2 Netapp, Vim | 3 Hci Compute Node, Hci Compute Node Firmware, Vim | 2025-08-14 | N/A | 5.5 MEDIUM |
| Vim is an open source, command line text editor. A segmentation fault was found in Vim before 9.1.1043. In silent Ex mode (-s -e), Vim typically doesn't show a screen and just operates silently in batch mode. However, it is still possible to trigger the function that handles the scrolling of a gui version of Vim by feeding some binary characters to Vim. The function that handles the scrolling however may be triggering a redraw, which will access the ScreenLines pointer, even so this variable hasn't been allocated (since there is no screen). This vulnerability is fixed in 9.1.1043. | |||||
| CVE-2025-1215 | 2 Netapp, Vim | 2 Bootstrap Os, Vim | 2025-08-13 | N/A | 7.8 HIGH |
| A vulnerability classified as problematic was found in vim up to 9.1.1096. This vulnerability affects unknown code of the file src/main.c. The manipulation of the argument --log leads to memory corruption. It is possible to launch the attack on the local host. Upgrading to version 9.1.1097 is able to address this issue. The patch is identified as c5654b84480822817bb7b69ebc97c174c91185e9. It is recommended to upgrade the affected component. | |||||
| CVE-2025-55157 | 1 Vim | 1 Vim | 2025-08-12 | N/A | 8.8 HIGH |
| Vim is an open source, command line text editor. In versions from 9.1.1231 to before 9.1.1400, When processing nested tuples in Vim script, an error during evaluation can trigger a use-after-free in Vim’s internal tuple reference management. Specifically, the tuple_unref() function may access already freed memory due to improper lifetime handling, leading to memory corruption. The exploit requires direct user interaction, as the script must be explicitly executed within Vim. This issue has been patched in version 9.1.1400. | |||||
| CVE-2025-55158 | 1 Vim | 1 Vim | 2025-08-12 | N/A | 8.8 HIGH |
| Vim is an open source, command line text editor. In versions from 9.1.1231 to before 9.1.1406, when processing nested tuples during Vim9 script import operations, an error during evaluation can trigger a double-free in Vim’s internal typed value (typval_T) management. Specifically, the clear_tv() function may attempt to free memory that has already been deallocated, due to improper lifetime handling in the handle_import / ex_import code paths. The vulnerability can only be triggered if a user explicitly opens and executes a specially crafted Vim script. This issue has been patched in version 9.1.1406. | |||||
| CVE-2024-22667 | 2 Fedoraproject, Vim | 2 Fedora, Vim | 2025-05-15 | N/A | 7.8 HIGH |
| Vim before 9.0.2142 has a stack-based buffer overflow because did_set_langmap in map.c calls sprintf to write to the error buffer that is passed down to the option callback functions. | |||||
| CVE-2022-47024 | 1 Vim | 1 Vim | 2025-04-03 | N/A | 7.8 HIGH |
| A null pointer dereference issue was discovered in function gui_x11_create_blank_mouse in gui_x11.c in vim 8.1.2269 thru 9.0.0339 allows attackers to cause denial of service or other unspecified impacts. | |||||
| CVE-2023-46246 | 1 Vim | 1 Vim | 2025-02-13 | N/A | 5.5 MEDIUM |
| Vim is an improved version of the good old UNIX editor Vi. Heap-use-after-free in memory allocated in the function `ga_grow_inner` in in the file `src/alloc.c` at line 748, which is freed in the file `src/ex_docmd.c` in the function `do_cmdline` at line 1010 and then used again in `src/cmdhist.c` at line 759. When using the `:history` command, it's possible that the provided argument overflows the accepted value. Causing an Integer Overflow and potentially later an use-after-free. This vulnerability has been patched in version 9.0.2068. | |||||
| CVE-2023-3896 | 1 Vim | 1 Vim | 2025-02-13 | N/A | 7.8 HIGH |
| Divide By Zero in vim/vim from 9.0.1367-1 to 9.0.1367-3 | |||||
| CVE-2023-0049 | 2 Fedoraproject, Vim | 2 Fedora, Vim | 2025-01-17 | N/A | 7.8 HIGH |
| Out-of-bounds Read in GitHub repository vim/vim prior to 9.0.1143. | |||||
| CVE-2020-20703 | 1 Vim | 1 Vim | 2024-12-10 | N/A | 9.8 CRITICAL |
| Buffer Overflow vulnerability in VIM v.8.1.2135 allows a remote attacker to execute arbitrary code via the operand parameter. | |||||
| CVE-2024-41957 | 1 Vim | 1 Vim | 2024-11-29 | N/A | 5.3 MEDIUM |
| Vim is an open source command line text editor. Vim < v9.1.0647 has double free in src/alloc.c:616. When closing a window, the corresponding tagstack data will be cleared and freed. However a bit later, the quickfix list belonging to that window will also be cleared and if that quickfix list points to the same tagstack data, Vim will try to free it again, resulting in a double-free/use-after-free access exception. Impact is low since the user must intentionally execute vim with several non-default flags, but it may cause a crash of Vim. The issue has been fixed as of Vim patch v9.1.0647 | |||||
| CVE-2023-2610 | 1 Vim | 1 Vim | 2024-11-29 | N/A | 7.8 HIGH |
| Integer Overflow or Wraparound in GitHub repository vim/vim prior to 9.0.1532. | |||||