Total
11965 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2017-12260 | 1 Cisco | 16 Spa 501g, Spa 501g Firmware, Spa 502g and 13 more | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the implementation of Session Initiation Protocol (SIP) functionality in Cisco Small Business SPA50x, SPA51x, and SPA52x Series IP Phones could allow an unauthenticated, remote attacker to cause an affected device to become unresponsive, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper handling of SIP request messages by an affected device. An attacker could exploit this vulnerability by using formatted specifiers in a SIP payload that is sent to an affected device. A successful exploit could allow the attacker to cause the affected device to become unresponsive, resulting in a DoS condition that persists until the device is restarted manually. This vulnerability affects Cisco Small Business SPA50x, SPA51x, and SPA52x Series IP Phones that are running firmware release 7.6.2SR1 or earlier. Cisco Bug IDs: CSCvc63986. | |||||
| CVE-2017-12270 | 1 Cisco | 1 Ios Xr | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the gRPC code of Cisco IOS XR Software for Cisco Network Convergence System (NCS) 5500 Series Routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition when the emsd service stops. The vulnerability is due to the software's inability to process HTTP/2 packets. An attacker could exploit this vulnerability by sending a malformed HTTP/2 frame to the affected device. A successful exploit could allow the attacker to create a DoS condition when the emsd service stops. Cisco Bug IDs: CSCvb99388. | |||||
| CVE-2017-12282 | 1 Cisco | 2 Wireless Lan Controller, Wireless Lan Controller Software | 2019-10-09 | 5.7 MEDIUM | 6.1 MEDIUM |
| A vulnerability in the Access Network Query Protocol (ANQP) ingress frame processing functionality of Cisco Wireless LAN Controllers could allow an unauthenticated, Layer 2 RF-adjacent attacker to cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of ANQP query frames by the affected device. An attacker could exploit this vulnerability by sending a malformed ANQP query frame to an affected device that is on an RF-adjacent network. A successful exploit could allow the attacker to cause the affected device to restart unexpectedly, resulting in a DoS condition. This vulnerability affects Cisco Wireless LAN Controllers that are running a vulnerable release of Cisco WLC Software and are configured to support Hotspot 2.0. Cisco Bug IDs: CSCve05779. | |||||
| CVE-2017-12293 | 1 Cisco | 1 Webex Meetings Server | 2019-10-09 | 5.0 MEDIUM | 8.6 HIGH |
| A vulnerability in Cisco WebEx Meetings Server could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient limitations on the number of connections that can be made to the affected software. An attacker could exploit this vulnerability by opening multiple connections to the server and exhausting server resources. A successful exploit could cause the server to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvf41006. | |||||
| CVE-2017-12259 | 1 Cisco | 2 Small Business Ip Phone, Small Business Ip Phone Firmware | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the implementation of Session Initiation Protocol (SIP) functionality in Cisco Small Business SPA51x Series IP Phones could allow an unauthenticated, remote attacker to cause an affected device to become unresponsive, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper handling of SIP request messages by an affected device. An attacker could exploit this vulnerability by sending malformed SIP messages to an affected device. A successful exploit could allow the attacker to cause the affected device to become unresponsive, resulting in a DoS condition that persists until the device is restarted manually. This vulnerability affects Cisco Small Business SPA51x Series IP Phones that are running Cisco SPA51x Firmware Release 7.6.2SR1 or earlier. Cisco Bug IDs: CSCvc63982. | |||||
| CVE-2017-12280 | 1 Cisco | 2 Wireless Lan Controller, Wireless Lan Controller Software | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) Discovery Request parsing functionality of Cisco Wireless LAN Controllers could allow an unauthenticated, remote attacker to cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of fields in CAPWAP Discovery Request packets by the affected device. An attacker could exploit this vulnerability by sending crafted CAPWAP Discovery Request packets to an affected device. A successful exploit could allow the attacker to cause the affected device to restart unexpectedly, resulting in a DoS condition. Cisco Bug IDs: CSCvb95842. | |||||
| CVE-2017-12283 | 1 Cisco | 4 Aironet 3800 Firmware, Aironet 3800e, Aironet 3800i and 1 more | 2019-10-09 | 2.9 LOW | 6.1 MEDIUM |
| A vulnerability in the handling of 802.11w Protected Management Frames (PAF) by Cisco Aironet 3800 Series Access Points could allow an unauthenticated, adjacent attacker to terminate a valid user connection to an affected device, aka Denial of Service. The vulnerability exists because the affected device does not properly validate 802.11w PAF disassociation and deauthentication frames that it receives. An attacker could exploit this vulnerability by sending a spoofed 802.11w PAF frame from a valid, authenticated client on an adjacent network to an affected device. A successful exploit could allow the attacker to terminate a single valid user connection to the affected device. This vulnerability affects Access Points that are configured to run in FlexConnect mode. Cisco Bug IDs: CSCvc20627. | |||||
| CVE-2016-6563 | 1 Dlink | 18 Dir-818l\(w\), Dir-818l\(w\) Firmware, Dir-822 and 15 more | 2019-10-09 | 10.0 HIGH | 9.8 CRITICAL |
| Processing malformed SOAP messages when performing the HNAP Login action causes a buffer overflow in the stack in some D-Link DIR routers. The vulnerable XML fields within the SOAP body are: Action, Username, LoginPassword, and Captcha. The following products are affected: DIR-823, DIR-822, DIR-818L(W), DIR-895L, DIR-890L, DIR-885L, DIR-880L, DIR-868L, and DIR-850L. | |||||
| CVE-2016-6559 | 1 Freebsd | 1 Freebsd | 2019-10-09 | 7.5 HIGH | 9.8 CRITICAL |
| Improper bounds checking of the obuf variable in the link_ntoa() function in linkaddr.c of the BSD libc library may allow an attacker to read or write from memory. The full impact and severity depends on the method of exploit and how the library is used by applications. According to analysis by FreeBSD developers, it is very unlikely that applications exist that utilize link_ntoa() in an exploitable manner, and the CERT/CC is not aware of any proof of concept. A blog post describes the functionality of link_ntoa() and points out that none of the base utilities use this function in an exploitable manner. For more information, please see FreeBSD Security Advisory SA-16:37. | |||||
| CVE-2016-5800 | 1 Fatek | 2 Automation Fv Designer, Automation Pm Designer V3 | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A malicious attacker can trigger a remote buffer overflow in the Communication Server in Fatek Automation PM Designer V3 Version 2.1.2.2, and Automation FV Designer Version 1.2.8.0. | |||||
| CVE-2016-10518 | 1 Ws Project | 1 Ws | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability was found in the ping functionality of the ws module before 1.0.0 which allowed clients to allocate memory by sending a ping frame. The ping functionality by default responds with a pong frame and the previously given payload of the ping frame. This is exactly what you expect, but internally ws always transforms all data that we need to send to a Buffer instance and that is where the vulnerability existed. ws didn't do any checks for the type of data it was sending. With buffers in node when you allocate it when a number instead of a string it will allocate the amount of bytes. | |||||
| CVE-2016-10523 | 1 Mqtt-packet Project | 1 Mqtt-packet | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| MQTT before 3.4.6 and 4.0.x before 4.0.5 allows specifically crafted MQTT packets to crash the application, making a DoS attack feasible with very little bandwidth. | |||||
| CVE-2015-6457 | 1 Moxa | 1 Softcms | 2019-10-09 | 6.8 MEDIUM | 8.8 HIGH |
| Moxa SoftCMS 1.3 and prior is susceptible to a buffer overflow condition that may crash or allow remote code execution. Moxa released SoftCMS version 1.4 on June 1, 2015, to address the vulnerability. | |||||
| CVE-2015-6458 | 1 Moxa | 1 Softcms | 2019-10-09 | 6.8 MEDIUM | 8.8 HIGH |
| Moxa SoftCMS 1.3 and prior is susceptible to a buffer overflow condition that may crash or allow remote code execution. Moxa released SoftCMS version 1.4 on June 1, 2015, to address the vulnerability. | |||||
| CVE-2015-2110 | 1 Hp | 1 Loadrunner | 2019-10-09 | 10.0 HIGH | N/A |
| Buffer overflow in HP LoadRunner 11.52 allows remote attackers to execute arbitrary code via unspecified vectors. | |||||
| CVE-2015-1006 | 1 Opto22 | 4 Optodatalink, Optoopcserver, Pac Display and 1 more | 2019-10-09 | 10.0 HIGH | 9.8 CRITICAL |
| A vulnerable file in Opto 22 PAC Project Professional versions prior to R9.4006, PAC Project Basic versions prior to R9.4006, PAC Display Basic versions prior to R9.4f, PAC Display Professional versions prior to R9.4f, OptoOPCServer versions prior to R9.4c, and OptoDataLink version R9.4d and prior versions that were installed by PAC Project installer, versions prior to R9.4006, is susceptible to a heap-based buffer overflow condition that may allow remote code execution on the target system. Opto 22 suggests upgrading to the new product version as soon as possible. | |||||
| CVE-2015-1007 | 1 Opto22 | 4 Optodatalink, Optoopcserver, Pac Display and 1 more | 2019-10-09 | 9.3 HIGH | 7.8 HIGH |
| A specially crafted configuration file could be used to cause a stack-based buffer overflow condition in the OPCTest.exe, which may allow remote code execution on Opto 22 PAC Project Professional versions prior to R9.4008, PAC Project Basic versions prior to R9.4008, PAC Display Basic versions prior to R9.4g, PAC Display Professional versions prior to R9.4g, OptoOPCServer version R9.4c and prior that were installed by PAC Project installer, versions prior to R9.4008, and OptoDataLink version R9.4d and prior that were installed by PAC Project installer, versions prior to R9.4008. Opto 22 suggests upgrading to the new product version as soon as possible. | |||||
| CVE-2014-9189 | 1 Honeywell | 1 Experion Process Knowledge System | 2019-10-09 | 10.0 HIGH | 9.8 CRITICAL |
| Multiple stack-based buffer overflow vulnerabilities were found in Honeywell Experion PKS all versions prior to R400.6, all versions prior to R410.6, and all versions prior to R430.2 modules that could lead to possible remote code execution, dynamic memory corruption, or denial of service. Honeywell strongly encourages and recommends all customers running unsupported versions of EKPS prior to R400 to upgrade to a supported version. | |||||
| CVE-2014-9187 | 1 Honeywell | 1 Experion Process Knowledge System | 2019-10-09 | 7.5 HIGH | 9.8 CRITICAL |
| Multiple heap-based buffer overflow vulnerabilities exist in Honeywell Experion PKS all versions prior to R400.6, all versions prior to R410.6, and all versions prior to R430.2 modules, which could lead to possible remote code execution or denial of service. Honeywell strongly encourages and recommends all customers running unsupported versions of EKPS prior to R400 to upgrade to a supported version. | |||||
| CVE-2012-3274 | 1 Hp | 1 Intelligent Management Center | 2019-10-09 | 10.0 HIGH | N/A |
| Stack-based buffer overflow in uam.exe in the User Access Manager (UAM) component in HP Intelligent Management Center (IMC) before 5.1 E0101P01 allows remote attackers to execute arbitrary code via vectors related to log data. | |||||