Filtered by vendor Linux
Subscribe
Total
10566 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-49585 | 1 Linux | 1 Linux Kernel | 2025-03-10 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix data-races around sysctl_tcp_fastopen_blackhole_timeout. While reading sysctl_tcp_fastopen_blackhole_timeout, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. | |||||
| CVE-2022-49573 | 1 Linux | 1 Linux Kernel | 2025-03-10 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix a data-race around sysctl_tcp_early_retrans. While reading sysctl_tcp_early_retrans, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. | |||||
| CVE-2022-49572 | 1 Linux | 1 Linux Kernel | 2025-03-10 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix data-races around sysctl_tcp_slow_start_after_idle. While reading sysctl_tcp_slow_start_after_idle, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. | |||||
| CVE-2022-49571 | 1 Linux | 1 Linux Kernel | 2025-03-10 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix data-races around sysctl_tcp_max_reordering. While reading sysctl_tcp_max_reordering, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. | |||||
| CVE-2022-49599 | 1 Linux | 1 Linux Kernel | 2025-03-10 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix data-races around sysctl_tcp_l3mdev_accept. While reading sysctl_tcp_l3mdev_accept, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. | |||||
| CVE-2022-49597 | 1 Linux | 1 Linux Kernel | 2025-03-10 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix data-races around sysctl_tcp_base_mss. While reading sysctl_tcp_base_mss, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. | |||||
| CVE-2022-49598 | 1 Linux | 1 Linux Kernel | 2025-03-10 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix data-races around sysctl_tcp_mtu_probing. While reading sysctl_tcp_mtu_probing, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. | |||||
| CVE-2022-49596 | 1 Linux | 1 Linux Kernel | 2025-03-10 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix data-races around sysctl_tcp_min_snd_mss. While reading sysctl_tcp_min_snd_mss, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. | |||||
| CVE-2022-49595 | 1 Linux | 1 Linux Kernel | 2025-03-10 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix a data-race around sysctl_tcp_probe_threshold. While reading sysctl_tcp_probe_threshold, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. | |||||
| CVE-2022-49593 | 1 Linux | 1 Linux Kernel | 2025-03-10 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix a data-race around sysctl_tcp_probe_interval. While reading sysctl_tcp_probe_interval, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. | |||||
| CVE-2022-49594 | 1 Linux | 1 Linux Kernel | 2025-03-10 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix a data-race around sysctl_tcp_mtu_probe_floor. While reading sysctl_tcp_mtu_probe_floor, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. | |||||
| CVE-2022-49591 | 1 Linux | 1 Linux Kernel | 2025-03-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: microchip: ksz_common: Fix refcount leak bug In ksz_switch_register(), we should call of_node_put() for the reference returned by of_get_child_by_name() which has increased the refcount. | |||||
| CVE-2022-49590 | 1 Linux | 1 Linux Kernel | 2025-03-10 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: igmp: Fix data-races around sysctl_igmp_llm_reports. While reading sysctl_igmp_llm_reports, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. This test can be packed into a helper, so such changes will be in the follow-up series after net is merged into net-next. if (ipv4_is_local_multicast(pmc->multiaddr) && !READ_ONCE(net->ipv4.sysctl_igmp_llm_reports)) | |||||
| CVE-2022-49589 | 1 Linux | 1 Linux Kernel | 2025-03-10 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: igmp: Fix data-races around sysctl_igmp_qrv. While reading sysctl_igmp_qrv, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. This test can be packed into a helper, so such changes will be in the follow-up series after net is merged into net-next. qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv); | |||||
| CVE-2024-50302 | 2 Google, Linux | 2 Android, Linux Kernel | 2025-03-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: zero-initialize the report buffer Since the report buffer is used by all kinds of drivers in various ways, let's zero-initialize it during allocation to make sure that it can't be ever used to leak kernel memory via specially-crafted report. | |||||
| CVE-2022-49550 | 1 Linux | 1 Linux Kernel | 2025-03-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: provide block_invalidate_folio to fix memory leak The ntfs3 filesystem lacks the 'invalidate_folio' method and it causes memory leak. If you write to the filesystem and then unmount it, the cached written data are not freed and they are permanently leaked. | |||||
| CVE-2022-49547 | 1 Linux | 1 Linux Kernel | 2025-03-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock between concurrent dio writes when low on free data space When reserving data space for a direct IO write we can end up deadlocking if we have multiple tasks attempting a write to the same file range, there are multiple extents covered by that file range, we are low on available space for data and the writes don't expand the inode's i_size. The deadlock can happen like this: 1) We have a file with an i_size of 1M, at offset 0 it has an extent with a size of 128K and at offset 128K it has another extent also with a size of 128K; 2) Task A does a direct IO write against file range [0, 256K), and because the write is within the i_size boundary, it takes the inode's lock (VFS level) in shared mode; 3) Task A locks the file range [0, 256K) at btrfs_dio_iomap_begin(), and then gets the extent map for the extent covering the range [0, 128K). At btrfs_get_blocks_direct_write(), it creates an ordered extent for that file range ([0, 128K)); 4) Before returning from btrfs_dio_iomap_begin(), it unlocks the file range [0, 256K); 5) Task A executes btrfs_dio_iomap_begin() again, this time for the file range [128K, 256K), and locks the file range [128K, 256K); 6) Task B starts a direct IO write against file range [0, 256K) as well. It also locks the inode in shared mode, as it's within the i_size limit, and then tries to lock file range [0, 256K). It is able to lock the subrange [0, 128K) but then blocks waiting for the range [128K, 256K), as it is currently locked by task A; 7) Task A enters btrfs_get_blocks_direct_write() and tries to reserve data space. Because we are low on available free space, it triggers the async data reclaim task, and waits for it to reserve data space; 8) The async reclaim task decides to wait for all existing ordered extents to complete (through btrfs_wait_ordered_roots()). It finds the ordered extent previously created by task A for the file range [0, 128K) and waits for it to complete; 9) The ordered extent for the file range [0, 128K) can not complete because it blocks at btrfs_finish_ordered_io() when trying to lock the file range [0, 128K). This results in a deadlock, because: - task B is holding the file range [0, 128K) locked, waiting for the range [128K, 256K) to be unlocked by task A; - task A is holding the file range [128K, 256K) locked and it's waiting for the async data reclaim task to satisfy its space reservation request; - the async data reclaim task is waiting for ordered extent [0, 128K) to complete, but the ordered extent can not complete because the file range [0, 128K) is currently locked by task B, which is waiting on task A to unlock file range [128K, 256K) and task A waiting on the async data reclaim task. This results in a deadlock between 4 task: task A, task B, the async data reclaim task and the task doing ordered extent completion (a work queue task). This type of deadlock can sporadically be triggered by the test case generic/300 from fstests, and results in a stack trace like the following: [12084.033689] INFO: task kworker/u16:7:123749 blocked for more than 241 seconds. [12084.034877] Not tainted 5.18.0-rc2-btrfs-next-115 #1 [12084.035562] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [12084.036548] task:kworker/u16:7 state:D stack: 0 pid:123749 ppid: 2 flags:0x00004000 [12084.036554] Workqueue: btrfs-flush_delalloc btrfs_work_helper [btrfs] [12084.036599] Call Trace: [12084.036601] <TASK> [12084.036606] __schedule+0x3cb/0xed0 [12084.036616] schedule+0x4e/0xb0 [12084.036620] btrfs_start_ordered_extent+0x109/0x1c0 [btrfs] [12084.036651] ? prepare_to_wait_exclusive+0xc0/0xc0 [12084.036659] btrfs_run_ordered_extent_work+0x1a/0x30 [btrfs] [12084.036688] btrfs_work_helper+0xf8/0x400 [btrfs] [12084.0367 ---truncated--- | |||||
| CVE-2024-28793 | 3 Ibm, Linux, Microsoft | 3 Engineering Workflow Management, Linux Kernel, Windows | 2025-03-10 | N/A | 5.4 MEDIUM |
| IBM Engineering Workflow Management 7.0.2 and 7.0.3 is vulnerable to stored cross-site scripting. Under certain configurations, this vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 286830. | |||||
| CVE-2023-45188 | 3 Ibm, Linux, Microsoft | 3 Engineering Lifecycle Optimization Publishing, Linux Kernel, Windows | 2025-03-10 | N/A | 9.8 CRITICAL |
| IBM Engineering Lifecycle Optimization Publishing 7.0.2 and 7.03 could allow a remote attacker to upload arbitrary files, caused by the improper validation of file extensions. By sending a specially crafted request, a remote attacker could exploit this vulnerability to upload a malicious file, which could allow the attacker to execute arbitrary code on the vulnerable system. IBM X-Force ID: 268751. | |||||
| CVE-2024-35117 | 3 Ibm, Linux, Microsoft | 3 Openpages With Watson, Linux Kernel, Windows | 2025-03-10 | N/A | 4.4 MEDIUM |
| IBM OpenPages with Watson 9.0 may write sensitive information, under specific configurations, in clear text to the system tracing log files that could be obtained by a privileged user. | |||||