Filtered by vendor Linksys
Subscribe
Total
154 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2007-5474 | 2 Atheros, Linksys | 2 Ar5416-ac1e Chipset, Wrt350n | 2018-10-15 | 6.3 MEDIUM | N/A |
| The driver for the Linksys WRT350N Wi-Fi access point with firmware 2.00.17 on the Atheros AR5416-AC1E chipset does not properly parse the Atheros vendor-specific information element in an association request, which allows remote authenticated users to cause a denial of service (device reboot or hang) or possibly execute arbitrary code via an Atheros information element with an invalid length, as demonstrated by an element that is too long. | |||||
| CVE-2007-3574 | 1 Linksys | 1 Wag54gs | 2018-10-15 | 4.3 MEDIUM | N/A |
| Multiple cross-site scripting (XSS) vulnerabilities in setup.cgi on the Cisco Linksys WAG54GS Wireless-G ADSL Gateway with 1.00.06 firmware allow remote attackers to inject arbitrary web script or HTML via the (1) c4_trap_ip_, (2) devname, (3) snmp_getcomm, or (4) snmp_setcomm parameter. | |||||
| CVE-2008-4441 | 2 Linksys, Marvell | 2 Wap400n, 88w8361p-bem1 | 2018-10-11 | 7.1 HIGH | N/A |
| The Marvell driver for the Linksys WAP4400N Wi-Fi access point with firmware 1.2.14 on the Marvell 88W8361P-BEM1 chipset, when WEP mode is enabled, does not properly parse malformed 802.11 frames, which allows remote attackers to cause a denial of service (reboot or hang-up) via a malformed association request containing the WEP flag, as demonstrated by a request that is too short, a different vulnerability than CVE-2008-1144 and CVE-2008-1197. | |||||
| CVE-2008-1268 | 1 Linksys | 1 Wrt54g | 2018-10-11 | 10.0 HIGH | N/A |
| The FTP server on the Linksys WRT54G 7 router with 7.00.1 firmware does not verify authentication credentials, which allows remote attackers to establish an FTP session by sending an arbitrary username and password. | |||||
| CVE-2008-1263 | 1 Linksys | 1 Wrt54g | 2018-10-11 | 4.0 MEDIUM | N/A |
| The Linksys WRT54G router stores passwords and keys in cleartext in the Config.bin file, which might allow remote authenticated users to obtain sensitive information via an HTTP request for the top-level Config.bin URI. | |||||
| CVE-2008-1264 | 1 Linksys | 1 Wrt54g | 2018-10-11 | 7.5 HIGH | N/A |
| The Linksys WRT54G router has "admin" as its default FTP password, which allows remote attackers to access sensitive files including nvram.cfg, a file that lists all HTML documents, and an ELF executable file. | |||||
| CVE-2008-1265 | 1 Linksys | 1 Wrt54g | 2018-10-11 | 7.8 HIGH | N/A |
| The Linksys WRT54G router allows remote attackers to cause a denial of service (device restart) via a long username and password to the FTP interface. | |||||
| CVE-2008-1243 | 1 Linksys | 1 Wrt300n | 2018-10-11 | 4.3 MEDIUM | N/A |
| Cross-site scripting (XSS) vulnerability on the Linksys WRT300N router with firmware 2.00.20, when Mozilla Firefox or Apple Safari is used, allows remote attackers to inject arbitrary web script or HTML via the dyndns_domain parameter to the default URI. | |||||
| CVE-2008-1247 | 1 Linksys | 1 Wrt54g | 2018-10-11 | 10.0 HIGH | N/A |
| The web interface on the Linksys WRT54g router with firmware 1.00.9 does not require credentials when invoking scripts, which allows remote attackers to perform arbitrary administrative actions via a direct request to (1) Advanced.tri, (2) AdvRoute.tri, (3) Basic.tri, (4) ctlog.tri, (5) ddns.tri, (6) dmz.tri, (7) factdefa.tri, (8) filter.tri, (9) fw.tri, (10) manage.tri, (11) ping.tri, (12) PortRange.tri, (13) ptrigger.tri, (14) qos.tri, (15) rstatus.tri, (16) tracert.tri, (17) vpn.tri, (18) WanMac.tri, (19) WBasic.tri, or (20) WFilter.tri. NOTE: the Security.tri vector is already covered by CVE-2006-5202. | |||||
| CVE-2010-2261 | 1 Linksys | 1 Wap54gv3 | 2018-10-10 | 10.0 HIGH | N/A |
| Linksys WAP54Gv3 firmware 3.04.03 and earlier allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) data2 and (2) data3 parameters to (a) Debug_command_page.asp and (b) debug.cgi. | |||||
| CVE-2017-17411 | 1 Linksys | 2 Wvbr0, Wvbr0 Firmware | 2018-08-28 | 10.0 HIGH | 9.8 CRITICAL |
| This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Linksys WVBR0. Authentication is not required to exploit this vulnerability. The specific flaw exists within the web management portal. The issue lies in the lack of proper validation of user data before executing a system call. An attacker could leverage this vulnerability to execute code with root privileges. Was ZDI-CAN-4892. | |||||
| CVE-2007-2270 | 1 Linksys | 1 Spa941 | 2017-10-11 | 7.8 HIGH | N/A |
| The Linksys SPA941 VoIP Phone allows remote attackers to cause a denial of service (device reboot) via a 0377 (0xff) character in the From header, and possibly certain other locations, in a SIP INVITE request. | |||||
| CVE-2006-5202 | 1 Linksys | 1 Wrt54g | 2017-10-11 | 5.0 MEDIUM | N/A |
| Linksys WRT54g firmware 1.00.9 does not require credentials when making configuration changes, which allows remote attackers to modify arbitrary configurations via a direct request to Security.tri, as demonstrated using the SecurityMode and layout parameters, a different issue than CVE-2006-2559. | |||||
| CVE-2001-1117 | 1 Linksys | 1 Befsr41 | 2017-10-10 | 5.0 MEDIUM | N/A |
| LinkSys EtherFast BEFSR41 Cable/DSL routers running firmware before 1.39.3 Beta allows a remote attacker to view administration and user passwords by connecting to the router and viewing the HTML source for (1) index.htm and (2) Password.htm. | |||||
| CVE-2001-0888 | 3 Atmel, Linksys, Netgear | 3 Firmware, Wap11, Me102 | 2017-10-10 | 5.0 MEDIUM | N/A |
| Atmel Firmware 1.3 Wireless Access Point (WAP) allows remote attackers to cause a denial of service via a SNMP request with (1) a community string other than "public" or (2) an unknown OID, which causes the WAP to deny subsequent SNMP requests. | |||||
| CVE-2001-0514 | 3 Atmel, Linksys, Netgear | 3 802.11b Vnet-b Access Point, Wap11, Me102 | 2017-10-10 | 7.5 HIGH | N/A |
| SNMP service in Atmel 802.11b VNET-B Access Point 1.3 and earlier, as used in Netgear ME102 and Linksys WAP11, accepts arbitrary community strings with requested MIB modifications, which allows remote attackers to obtain sensitive information such as WEP keys, cause a denial of service, or gain access to the network. | |||||
| CVE-2017-10677 | 1 Linksys | 2 Ea4500, Ea4500 Firmware | 2017-08-14 | 6.8 MEDIUM | 8.8 HIGH |
| Cross-Site Request Forgery (CSRF) exists on Linksys EA4500 devices with Firmware Version before 2.1.41.164606, as demonstrated by a request to apply.cgi to disable SIP. | |||||
| CVE-2008-4594 | 2 Linksys, Marvell | 2 Wap400n, 88w8361p-bem1 | 2017-08-08 | 10.0 HIGH | N/A |
| Unspecified vulnerability in the SNMPv3 component in Linksys WAP4400N firmware 1.2.14 on the Marvell Semiconductor 88W8361P-BEM1 chipset has unknown impact and attack vectors, probably remote. | |||||
| CVE-2008-2092 | 1 Linksys | 1 Spa-2102 Phone Adapter | 2017-08-08 | 7.8 HIGH | N/A |
| Linksys SPA-2102 Phone Adapter 3.3.6 allows remote attackers to cause a denial of service (crash) via a long ping packet ("ping of death"). NOTE: the severity of this issue has been disputed since there are limited attack scenarios. | |||||
| CVE-2007-5411 | 1 Linksys | 1 Spa941 | 2017-07-29 | 4.3 MEDIUM | N/A |
| Cross-site scripting (XSS) vulnerability in the Linksys SPA941 VoIP Phone with firmware 5.1.8 allows remote attackers to inject arbitrary web script or HTML via the From header in a SIP message. | |||||