Filtered by vendor Redhat
Subscribe
Total
5731 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2023-6563 | 1 Redhat | 6 Enterprise Linux, Keycloak, Openshift Container Platform and 3 more | 2023-12-27 | N/A | 7.7 HIGH |
| An unconstrained memory consumption vulnerability was discovered in Keycloak. It can be triggered in environments which have millions of offline tokens (> 500,000 users with each having at least 2 saved sessions). If an attacker creates two or more user sessions and then open the "consents" tab of the admin User Interface, the UI attempts to load a huge number of offline client sessions leading to excessive memory and CPU consumption which could potentially crash the entire system. | |||||
| CVE-2019-10158 | 2 Infinispan, Redhat | 2 Infinispan, Jboss Data Grid | 2023-12-27 | 7.5 HIGH | 9.8 CRITICAL |
| A flaw was found in Infinispan through version 9.4.14.Final. An improper implementation of the session fixation protection in the Spring Session integration can result in incorrect session handling. | |||||
| CVE-2018-8088 | 3 Oracle, Qos, Redhat | 14 Goldengate Application Adapters, Goldengate Stream Analytics, Utilities Framework and 11 more | 2023-12-27 | 7.5 HIGH | 9.8 CRITICAL |
| org.slf4j.ext.EventData in the slf4j-ext module in QOS.CH SLF4J before 1.8.0-beta2 allows remote attackers to bypass intended access restrictions via crafted data. EventData in the slf4j-ext module in QOS.CH SLF4J, has been fixed in SLF4J versions 1.7.26 later and in the 2.0.x series. | |||||
| CVE-2022-3650 | 1 Redhat | 1 Ceph | 2023-12-23 | N/A | 7.8 HIGH |
| A privilege escalation flaw was found in Ceph. Ceph-crash.service allows a local attacker to escalate privileges to root in the form of a crash dump, and dump privileged information. | |||||
| CVE-2021-43860 | 4 Debian, Fedoraproject, Flatpak and 1 more | 4 Debian Linux, Fedora, Flatpak and 1 more | 2023-12-23 | 6.8 MEDIUM | 8.6 HIGH |
| Flatpak is a Linux application sandboxing and distribution framework. Prior to versions 1.12.3 and 1.10.6, Flatpak doesn't properly validate that the permissions displayed to the user for an app at install time match the actual permissions granted to the app at runtime, in the case that there's a null byte in the metadata file of an app. Therefore apps can grant themselves permissions without the consent of the user. Flatpak shows permissions to the user during install by reading them from the "xa.metadata" key in the commit metadata. This cannot contain a null terminator, because it is an untrusted GVariant. Flatpak compares these permissions to the *actual* metadata, from the "metadata" file to ensure it wasn't lied to. However, the actual metadata contents are loaded in several places where they are read as simple C-style strings. That means that, if the metadata file includes a null terminator, only the content of the file from *before* the terminator gets compared to xa.metadata. Thus, any permissions that appear in the metadata file after a null terminator are applied at runtime but not shown to the user. So maliciously crafted apps can give themselves hidden permissions. Users who have Flatpaks installed from untrusted sources are at risk in case the Flatpak has a maliciously crafted metadata file, either initially or in an update. This issue is patched in versions 1.12.3 and 1.10.6. As a workaround, users can manually check the permissions of installed apps by checking the metadata file or the xa.metadata key on the commit metadata. | |||||
| CVE-2022-21682 | 4 Debian, Fedoraproject, Flatpak and 1 more | 5 Debian Linux, Fedora, Flatpak and 2 more | 2023-12-23 | 4.0 MEDIUM | 6.5 MEDIUM |
| Flatpak is a Linux application sandboxing and distribution framework. A path traversal vulnerability affects versions of Flatpak prior to 1.12.3 and 1.10.6. flatpak-builder applies `finish-args` last in the build. At this point the build directory will have the full access that is specified in the manifest, so running `flatpak build` against it will gain those permissions. Normally this will not be done, so this is not problem. However, if `--mirror-screenshots-url` is specified, then flatpak-builder will launch `flatpak build --nofilesystem=host appstream-utils mirror-screenshots` after finalization, which can lead to issues even with the `--nofilesystem=host` protection. In normal use, the only issue is that these empty directories can be created wherever the user has write permissions. However, a malicious application could replace the `appstream-util` binary and potentially do something more hostile. This has been resolved in Flatpak 1.12.3 and 1.10.6 by changing the behaviour of `--nofilesystem=home` and `--nofilesystem=host`. | |||||
| CVE-2023-3430 | 2 Openimageio, Redhat | 2 Openimageio, Linux | 2023-12-22 | N/A | 7.5 HIGH |
| A vulnerability was found in OpenImageIO, where a heap buffer overflow exists in the src/gif.imageio/gifinput.cpp file. This flaw allows a remote attacker to pass a specially crafted file to the application, which triggers a heap-based buffer overflow and could cause a crash, leading to a denial of service. | |||||
| CVE-2011-1002 | 5 Avahi, Canonical, Debian and 2 more | 5 Avahi, Ubuntu Linux, Debian Linux and 2 more | 2023-12-22 | 5.0 MEDIUM | N/A |
| avahi-core/socket.c in avahi-daemon in Avahi before 0.6.29 allows remote attackers to cause a denial of service (infinite loop) via an empty mDNS (1) IPv4 or (2) IPv6 UDP packet to port 5353. NOTE: this vulnerability exists because of an incorrect fix for CVE-2010-2244. | |||||
| CVE-2022-1274 | 1 Redhat | 8 Enterprise Linux, Enterprise Linux For Ibm Z Systems, Enterprise Linux For Ibm Z Systems Eus and 5 more | 2023-12-22 | N/A | 5.4 MEDIUM |
| A flaw was found in Keycloak in the execute-actions-email endpoint. This issue allows arbitrary HTML to be injected into emails sent to Keycloak users and can be misused to perform phishing or other attacks against users. | |||||
| CVE-2023-1667 | 4 Debian, Fedoraproject, Libssh and 1 more | 4 Debian Linux, Fedora, Libssh and 1 more | 2023-12-22 | N/A | 6.5 MEDIUM |
| A NULL pointer dereference was found In libssh during re-keying with algorithm guessing. This issue may allow an authenticated client to cause a denial of service. | |||||
| CVE-2021-3634 | 6 Debian, Fedoraproject, Libssh and 3 more | 7 Debian Linux, Fedora, Libssh and 4 more | 2023-12-22 | 4.0 MEDIUM | 6.5 MEDIUM |
| A flaw has been found in libssh in versions prior to 0.9.6. The SSH protocol keeps track of two shared secrets during the lifetime of the session. One of them is called secret_hash and the other session_id. Initially, both of them are the same, but after key re-exchange, previous session_id is kept and used as an input to new secret_hash. Historically, both of these buffers had shared length variable, which worked as long as these buffers were same. But the key re-exchange operation can also change the key exchange method, which can be based on hash of different size, eventually creating "secret_hash" of different size than the session_id has. This becomes an issue when the session_id memory is zeroed or when it is used again during second key re-exchange. | |||||
| CVE-2021-4104 | 4 Apache, Fedoraproject, Oracle and 1 more | 46 Log4j, Fedora, Advanced Supply Chain Planning and 43 more | 2023-12-22 | 6.0 MEDIUM | 7.5 HIGH |
| JMSAppender in Log4j 1.2 is vulnerable to deserialization of untrusted data when the attacker has write access to the Log4j configuration. The attacker can provide TopicBindingName and TopicConnectionFactoryBindingName configurations causing JMSAppender to perform JNDI requests that result in remote code execution in a similar fashion to CVE-2021-44228. Note this issue only affects Log4j 1.2 when specifically configured to use JMSAppender, which is not the default. Apache Log4j 1.2 reached end of life in August 2015. Users should upgrade to Log4j 2 as it addresses numerous other issues from the previous versions. | |||||
| CVE-2023-4853 | 2 Quarkus, Redhat | 13 Quarkus, Build Of Optaplanner, Build Of Quarkus and 10 more | 2023-12-21 | N/A | 8.1 HIGH |
| A flaw was found in Quarkus where HTTP security policies are not sanitizing certain character permutations correctly when accepting requests, resulting in incorrect evaluation of permissions. This issue could allow an attacker to bypass the security policy altogether, resulting in unauthorized endpoint access and possibly a denial of service. | |||||
| CVE-2022-1184 | 4 Canonical, Debian, Linux and 1 more | 4 Ubuntu Linux, Debian Linux, Linux Kernel and 1 more | 2023-12-20 | N/A | 5.5 MEDIUM |
| A use-after-free flaw was found in fs/ext4/namei.c:dx_insert_block() in the Linux kernel’s filesystem sub-component. This flaw allows a local attacker with a user privilege to cause a denial of service. | |||||
| CVE-2011-4517 | 7 Canonical, Debian, Fedoraproject and 4 more | 9 Ubuntu Linux, Debian Linux, Fedora and 6 more | 2023-12-20 | 6.8 MEDIUM | N/A |
| The jpc_crg_getparms function in libjasper/jpc/jpc_cs.c in JasPer 1.900.1 uses an incorrect data type during a certain size calculation, which allows remote attackers to trigger a heap-based buffer overflow and execute arbitrary code, or cause a denial of service (heap memory corruption), via a crafted component registration (CRG) marker segment in a JPEG2000 file. | |||||
| CVE-2015-8668 | 3 Libtiff, Oracle, Redhat | 6 Libtiff, Linux, Vm Server and 3 more | 2023-12-20 | 7.5 HIGH | 9.8 CRITICAL |
| Heap-based buffer overflow in the PackBitsPreEncode function in tif_packbits.c in bmp2tiff in libtiff 4.0.6 and earlier allows remote attackers to execute arbitrary code or cause a denial of service via a large width field in a BMP image. | |||||
| CVE-2019-14835 | 8 Canonical, Debian, Fedoraproject and 5 more | 44 Ubuntu Linux, Debian Linux, Fedora and 41 more | 2023-12-15 | 7.2 HIGH | 7.8 HIGH |
| A buffer overflow flaw was found, in versions from 2.6.34 to 5.2.x, in the way Linux kernel's vhost functionality that translates virtqueue buffers to IOVs, logged the buffer descriptors during migration. A privileged guest user able to pass descriptors with invalid length to the host when migration is underway, could use this flaw to increase their privileges on the host. | |||||
| CVE-2022-46344 | 4 Debian, Fedoraproject, Redhat and 1 more | 4 Debian Linux, Fedora, Enterprise Linux and 1 more | 2023-12-13 | N/A | 8.8 HIGH |
| A vulnerability was found in X.Org. This security flaw occurs because the handler for the XIChangeProperty request has a length-validation issues, resulting in out-of-bounds memory reads and potential information disclosure. This issue can lead to local privileges elevation on systems where the X server is running privileged and remote code execution for ssh X forwarding sessions. | |||||
| CVE-2023-4956 | 1 Redhat | 1 Quay | 2023-12-13 | N/A | 4.3 MEDIUM |
| A flaw was found in Quay. Clickjacking is when an attacker uses multiple transparent or opaque layers to trick a user into clicking on a button or link on another page when they intend to click on the top-level page. During the pentest, it has been detected that the config-editor page is vulnerable to clickjacking. This flaw allows an attacker to trick an administrator user into clicking on buttons on the config-editor panel, possibly reconfiguring some parts of the Quay instance. | |||||
| CVE-2023-4910 | 1 Redhat | 1 3scale Api Management | 2023-12-13 | N/A | 5.5 MEDIUM |
| A flaw was found In 3Scale Admin Portal. If a user logs out from the personal tokens page and then presses the back button in the browser, the tokens page is rendered from the browser cache. | |||||