Total
255 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-2097 | 5 Debian, Fedoraproject, Netapp and 2 more | 15 Debian Linux, Fedora, Active Iq Unified Manager and 12 more | 2024-06-21 | 5.0 MEDIUM | 5.3 MEDIUM |
| AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn't written. In the special case of "in place" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected. Fixed in OpenSSL 3.0.5 (Affected 3.0.0-3.0.4). Fixed in OpenSSL 1.1.1q (Affected 1.1.1-1.1.1p). | |||||
| CVE-2019-1547 | 1 Openssl | 1 Openssl | 2024-06-21 | 1.9 LOW | 4.7 MEDIUM |
| Normally in OpenSSL EC groups always have a co-factor present and this is used in side channel resistant code paths. However, in some cases, it is possible to construct a group using explicit parameters (instead of using a named curve). In those cases it is possible that such a group does not have the cofactor present. This can occur even where all the parameters match a known named curve. If such a curve is used then OpenSSL falls back to non-side channel resistant code paths which may result in full key recovery during an ECDSA signature operation. In order to be vulnerable an attacker would have to have the ability to time the creation of a large number of signatures where explicit parameters with no co-factor present are in use by an application using libcrypto. For the avoidance of doubt libssl is not vulnerable because explicit parameters are never used. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL 1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s). | |||||
| CVE-2021-23840 | 7 Debian, Fujitsu, Mcafee and 4 more | 27 Debian Linux, M10-1, M10-1 Firmware and 24 more | 2024-06-21 | 5.0 MEDIUM | 7.5 HIGH |
| Calls to EVP_CipherUpdate, EVP_EncryptUpdate and EVP_DecryptUpdate may overflow the output length argument in some cases where the input length is close to the maximum permissable length for an integer on the platform. In such cases the return value from the function call will be 1 (indicating success), but the output length value will be negative. This could cause applications to behave incorrectly or crash. OpenSSL versions 1.1.1i and below are affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1j. OpenSSL versions 1.0.2x and below are affected by this issue. However OpenSSL 1.0.2 is out of support and no longer receiving public updates. Premium support customers of OpenSSL 1.0.2 should upgrade to 1.0.2y. Other users should upgrade to 1.1.1j. Fixed in OpenSSL 1.1.1j (Affected 1.1.1-1.1.1i). Fixed in OpenSSL 1.0.2y (Affected 1.0.2-1.0.2x). | |||||
| CVE-2021-4160 | 4 Debian, Openssl, Oracle and 1 more | 8 Debian Linux, Openssl, Enterprise Manager Ops Center and 5 more | 2024-06-21 | 4.3 MEDIUM | 5.9 MEDIUM |
| There is a carry propagation bug in the MIPS32 and MIPS64 squaring procedure. Many EC algorithms are affected, including some of the TLS 1.3 default curves. Impact was not analyzed in detail, because the pre-requisites for attack are considered unlikely and include reusing private keys. Analysis suggests that attacks against RSA and DSA as a result of this defect would be very difficult to perform and are not believed likely. Attacks against DH are considered just feasible (although very difficult) because most of the work necessary to deduce information about a private key may be performed offline. The amount of resources required for such an attack would be significant. However, for an attack on TLS to be meaningful, the server would have to share the DH private key among multiple clients, which is no longer an option since CVE-2016-0701. This issue affects OpenSSL versions 1.0.2, 1.1.1 and 3.0.0. It was addressed in the releases of 1.1.1m and 3.0.1 on the 15th of December 2021. For the 1.0.2 release it is addressed in git commit 6fc1aaaf3 that is available to premium support customers only. It will be made available in 1.0.2zc when it is released. The issue only affects OpenSSL on MIPS platforms. Fixed in OpenSSL 3.0.1 (Affected 3.0.0). Fixed in OpenSSL 1.1.1m (Affected 1.1.1-1.1.1l). Fixed in OpenSSL 1.0.2zc-dev (Affected 1.0.2-1.0.2zb). | |||||
| CVE-2021-3711 | 5 Debian, Netapp, Openssl and 2 more | 31 Debian Linux, Active Iq Unified Manager, Clustered Data Ontap and 28 more | 2024-06-21 | 7.5 HIGH | 9.8 CRITICAL |
| In order to decrypt SM2 encrypted data an application is expected to call the API function EVP_PKEY_decrypt(). Typically an application will call this function twice. The first time, on entry, the "out" parameter can be NULL and, on exit, the "outlen" parameter is populated with the buffer size required to hold the decrypted plaintext. The application can then allocate a sufficiently sized buffer and call EVP_PKEY_decrypt() again, but this time passing a non-NULL value for the "out" parameter. A bug in the implementation of the SM2 decryption code means that the calculation of the buffer size required to hold the plaintext returned by the first call to EVP_PKEY_decrypt() can be smaller than the actual size required by the second call. This can lead to a buffer overflow when EVP_PKEY_decrypt() is called by the application a second time with a buffer that is too small. A malicious attacker who is able present SM2 content for decryption to an application could cause attacker chosen data to overflow the buffer by up to a maximum of 62 bytes altering the contents of other data held after the buffer, possibly changing application behaviour or causing the application to crash. The location of the buffer is application dependent but is typically heap allocated. Fixed in OpenSSL 1.1.1l (Affected 1.1.1-1.1.1k). | |||||
| CVE-2021-23841 | 7 Apple, Debian, Netapp and 4 more | 23 Ipados, Iphone Os, Macos and 20 more | 2024-06-21 | 4.3 MEDIUM | 5.9 MEDIUM |
| The OpenSSL public API function X509_issuer_and_serial_hash() attempts to create a unique hash value based on the issuer and serial number data contained within an X509 certificate. However it fails to correctly handle any errors that may occur while parsing the issuer field (which might occur if the issuer field is maliciously constructed). This may subsequently result in a NULL pointer deref and a crash leading to a potential denial of service attack. The function X509_issuer_and_serial_hash() is never directly called by OpenSSL itself so applications are only vulnerable if they use this function directly and they use it on certificates that may have been obtained from untrusted sources. OpenSSL versions 1.1.1i and below are affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1j. OpenSSL versions 1.0.2x and below are affected by this issue. However OpenSSL 1.0.2 is out of support and no longer receiving public updates. Premium support customers of OpenSSL 1.0.2 should upgrade to 1.0.2y. Other users should upgrade to 1.1.1j. Fixed in OpenSSL 1.1.1j (Affected 1.1.1-1.1.1i). Fixed in OpenSSL 1.0.2y (Affected 1.0.2-1.0.2x). | |||||
| CVE-2021-3712 | 7 Debian, Mcafee, Netapp and 4 more | 32 Debian Linux, Epolicy Orchestrator, Clustered Data Ontap and 29 more | 2024-06-21 | 5.8 MEDIUM | 7.4 HIGH |
| ASN.1 strings are represented internally within OpenSSL as an ASN1_STRING structure which contains a buffer holding the string data and a field holding the buffer length. This contrasts with normal C strings which are repesented as a buffer for the string data which is terminated with a NUL (0) byte. Although not a strict requirement, ASN.1 strings that are parsed using OpenSSL's own "d2i" functions (and other similar parsing functions) as well as any string whose value has been set with the ASN1_STRING_set() function will additionally NUL terminate the byte array in the ASN1_STRING structure. However, it is possible for applications to directly construct valid ASN1_STRING structures which do not NUL terminate the byte array by directly setting the "data" and "length" fields in the ASN1_STRING array. This can also happen by using the ASN1_STRING_set0() function. Numerous OpenSSL functions that print ASN.1 data have been found to assume that the ASN1_STRING byte array will be NUL terminated, even though this is not guaranteed for strings that have been directly constructed. Where an application requests an ASN.1 structure to be printed, and where that ASN.1 structure contains ASN1_STRINGs that have been directly constructed by the application without NUL terminating the "data" field, then a read buffer overrun can occur. The same thing can also occur during name constraints processing of certificates (for example if a certificate has been directly constructed by the application instead of loading it via the OpenSSL parsing functions, and the certificate contains non NUL terminated ASN1_STRING structures). It can also occur in the X509_get1_email(), X509_REQ_get1_email() and X509_get1_ocsp() functions. If a malicious actor can cause an application to directly construct an ASN1_STRING and then process it through one of the affected OpenSSL functions then this issue could be hit. This might result in a crash (causing a Denial of Service attack). It could also result in the disclosure of private memory contents (such as private keys, or sensitive plaintext). Fixed in OpenSSL 1.1.1l (Affected 1.1.1-1.1.1k). Fixed in OpenSSL 1.0.2za (Affected 1.0.2-1.0.2y). | |||||
| CVE-2008-0166 | 3 Canonical, Debian, Openssl | 3 Ubuntu Linux, Debian Linux, Openssl | 2024-05-14 | 7.8 HIGH | 7.5 HIGH |
| OpenSSL 0.9.8c-1 up to versions before 0.9.8g-9 on Debian-based operating systems uses a random number generator that generates predictable numbers, which makes it easier for remote attackers to conduct brute force guessing attacks against cryptographic keys. | |||||
| CVE-2016-2107 | 8 Canonical, Debian, Google and 5 more | 15 Ubuntu Linux, Debian Linux, Android and 12 more | 2024-02-16 | 2.6 LOW | 5.9 MEDIUM |
| The AES-NI implementation in OpenSSL before 1.0.1t and 1.0.2 before 1.0.2h does not consider memory allocation during a certain padding check, which allows remote attackers to obtain sensitive cleartext information via a padding-oracle attack against an AES CBC session. NOTE: this vulnerability exists because of an incorrect fix for CVE-2013-0169. | |||||
| CVE-2004-0112 | 24 4d, Apple, Avaya and 21 more | 65 Webstar, Mac Os X, Mac Os X Server and 62 more | 2024-02-15 | 5.0 MEDIUM | N/A |
| The SSL/TLS handshaking code in OpenSSL 0.9.7a, 0.9.7b, and 0.9.7c, when using Kerberos ciphersuites, does not properly check the length of Kerberos tickets during a handshake, which allows remote attackers to cause a denial of service (crash) via a crafted SSL/TLS handshake that causes an out-of-bounds read. | |||||
| CVE-2003-0078 | 3 Freebsd, Openbsd, Openssl | 3 Freebsd, Openbsd, Openssl | 2024-02-14 | 5.0 MEDIUM | N/A |
| ssl3_get_record in s3_pkt.c for OpenSSL before 0.9.7a and 0.9.6 before 0.9.6i does not perform a MAC computation if an incorrect block cipher padding is used, which causes an information leak (timing discrepancy) that may make it easier to launch cryptographic attacks that rely on distinguishing between padding and MAC verification errors, possibly leading to extraction of the original plaintext, aka the "Vaudenay timing attack." | |||||
| CVE-2005-2946 | 2 Canonical, Openssl | 2 Ubuntu Linux, Openssl | 2024-02-09 | 5.0 MEDIUM | 7.5 HIGH |
| The default configuration on OpenSSL before 0.9.8 uses MD5 for creating message digests instead of a more cryptographically strong algorithm, which makes it easier for remote attackers to forge certificates with a valid certificate authority signature. | |||||
| CVE-2009-1386 | 3 Canonical, Openssl, Redhat | 3 Ubuntu Linux, Openssl, Openssl | 2024-02-07 | 5.0 MEDIUM | N/A |
| ssl/s3_pkt.c in OpenSSL before 0.9.8i allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via a DTLS ChangeCipherSpec packet that occurs before ClientHello. | |||||
| CVE-2009-1378 | 2 Canonical, Openssl | 2 Ubuntu Linux, Openssl | 2024-02-07 | 5.0 MEDIUM | N/A |
| Multiple memory leaks in the dtls1_process_out_of_seq_message function in ssl/d1_both.c in OpenSSL 0.9.8k and earlier 0.9.8 versions allow remote attackers to cause a denial of service (memory consumption) via DTLS records that (1) are duplicates or (2) have sequence numbers much greater than current sequence numbers, aka "DTLS fragment handling memory leak." | |||||
| CVE-2009-1377 | 1 Openssl | 1 Openssl | 2024-02-07 | 5.0 MEDIUM | N/A |
| The dtls1_buffer_record function in ssl/d1_pkt.c in OpenSSL 0.9.8k and earlier 0.9.8 versions allows remote attackers to cause a denial of service (memory consumption) via a large series of "future epoch" DTLS records that are buffered in a queue, aka "DTLS record buffer limitation bug." | |||||
| CVE-2009-1387 | 3 Canonical, Openssl, Redhat | 3 Ubuntu Linux, Openssl, Openssl | 2024-02-07 | 5.0 MEDIUM | N/A |
| The dtls1_retrieve_buffered_fragment function in ssl/d1_both.c in OpenSSL before 1.0.0 Beta 2 allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via an out-of-sequence DTLS handshake message, related to a "fragment bug." | |||||
| CVE-2022-3358 | 1 Openssl | 1 Openssl | 2024-02-04 | N/A | 7.5 HIGH |
| OpenSSL supports creating a custom cipher via the legacy EVP_CIPHER_meth_new() function and associated function calls. This function was deprecated in OpenSSL 3.0 and application authors are instead encouraged to use the new provider mechanism in order to implement custom ciphers. OpenSSL versions 3.0.0 to 3.0.5 incorrectly handle legacy custom ciphers passed to the EVP_EncryptInit_ex2(), EVP_DecryptInit_ex2() and EVP_CipherInit_ex2() functions (as well as other similarly named encryption and decryption initialisation functions). Instead of using the custom cipher directly it incorrectly tries to fetch an equivalent cipher from the available providers. An equivalent cipher is found based on the NID passed to EVP_CIPHER_meth_new(). This NID is supposed to represent the unique NID for a given cipher. However it is possible for an application to incorrectly pass NID_undef as this value in the call to EVP_CIPHER_meth_new(). When NID_undef is used in this way the OpenSSL encryption/decryption initialisation function will match the NULL cipher as being equivalent and will fetch this from the available providers. This will succeed if the default provider has been loaded (or if a third party provider has been loaded that offers this cipher). Using the NULL cipher means that the plaintext is emitted as the ciphertext. Applications are only affected by this issue if they call EVP_CIPHER_meth_new() using NID_undef and subsequently use it in a call to an encryption/decryption initialisation function. Applications that only use SSL/TLS are not impacted by this issue. Fixed in OpenSSL 3.0.6 (Affected 3.0.0-3.0.5). | |||||
| CVE-2003-0545 | 1 Openssl | 1 Openssl | 2024-02-02 | 10.0 HIGH | 9.8 CRITICAL |
| Double free vulnerability in OpenSSL 0.9.7 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via an SSL client certificate with a certain invalid ASN.1 encoding. | |||||
| CVE-2016-8610 | 7 Debian, Fujitsu, Netapp and 4 more | 53 Debian Linux, M10-1, M10-1 Firmware and 50 more | 2024-01-26 | 5.0 MEDIUM | 7.5 HIGH |
| A denial of service flaw was found in OpenSSL 0.9.8, 1.0.1, 1.0.2 through 1.0.2h, and 1.1.0 in the way the TLS/SSL protocol defined processing of ALERT packets during a connection handshake. A remote attacker could use this flaw to make a TLS/SSL server consume an excessive amount of CPU and fail to accept connections from other clients. | |||||
| CVE-2021-4044 | 3 Netapp, Nodejs, Openssl | 26 500f, 500f Firmware, A250 and 23 more | 2023-11-09 | 5.0 MEDIUM | 7.5 HIGH |
| Internally libssl in OpenSSL calls X509_verify_cert() on the client side to verify a certificate supplied by a server. That function may return a negative return value to indicate an internal error (for example out of memory). Such a negative return value is mishandled by OpenSSL and will cause an IO function (such as SSL_connect() or SSL_do_handshake()) to not indicate success and a subsequent call to SSL_get_error() to return the value SSL_ERROR_WANT_RETRY_VERIFY. This return value is only supposed to be returned by OpenSSL if the application has previously called SSL_CTX_set_cert_verify_callback(). Since most applications do not do this the SSL_ERROR_WANT_RETRY_VERIFY return value from SSL_get_error() will be totally unexpected and applications may not behave correctly as a result. The exact behaviour will depend on the application but it could result in crashes, infinite loops or other similar incorrect responses. This issue is made more serious in combination with a separate bug in OpenSSL 3.0 that will cause X509_verify_cert() to indicate an internal error when processing a certificate chain. This will occur where a certificate does not include the Subject Alternative Name extension but where a Certificate Authority has enforced name constraints. This issue can occur even with valid chains. By combining the two issues an attacker could induce incorrect, application dependent behaviour. Fixed in OpenSSL 3.0.1 (Affected 3.0.0). | |||||