Filtered by vendor Linux
Subscribe
Total
10566 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-48850 | 1 Linux | 1 Linux Kernel | 2024-07-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net-sysfs: add check for netdevice being present to speed_show When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. | |||||
| CVE-2022-48851 | 1 Linux | 1 Linux Kernel | 2024-07-23 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: staging: gdm724x: fix use after free in gdm_lte_rx() The netif_rx_ni() function frees the skb so we can't dereference it to save the skb->len. | |||||
| CVE-2022-48852 | 1 Linux | 1 Linux Kernel | 2024-07-23 | N/A | 3.3 LOW |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: hdmi: Unregister codec device on unbind On bind we will register the HDMI codec device but we don't unregister it on unbind, leading to a device leakage. Unregister our device at unbind. | |||||
| CVE-2022-48854 | 1 Linux | 1 Linux Kernel | 2024-07-23 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: arc_emac: Fix use after free in arc_mdio_probe() If bus->state is equal to MDIOBUS_ALLOCATED, mdiobus_free(bus) will free the "bus". But bus->name is still used in the next line, which will lead to a use after free. We can fix it by putting the name in a local variable and make the bus->name point to the rodata section "name",then use the name in the error message without referring to bus to avoid the uaf. | |||||
| CVE-2022-48855 | 1 Linux | 1 Linux Kernel | 2024-07-23 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix kernel-infoleak for SCTP sockets syzbot reported a kernel infoleak [1] of 4 bytes. After analysis, it turned out r->idiag_expires is not initialized if inet_sctp_diag_fill() calls inet_diag_msg_common_fill() Make sure to clear idiag_timer/idiag_retrans/idiag_expires and let inet_diag_msg_sctpasoc_fill() fill them again if needed. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:154 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668 instrument_copy_to_user include/linux/instrumented.h:121 [inline] copyout lib/iov_iter.c:154 [inline] _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668 copy_to_iter include/linux/uio.h:162 [inline] simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519 __skb_datagram_iter+0x2d5/0x11b0 net/core/datagram.c:425 skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533 skb_copy_datagram_msg include/linux/skbuff.h:3696 [inline] netlink_recvmsg+0x669/0x1c80 net/netlink/af_netlink.c:1977 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] __sys_recvfrom+0x795/0xa10 net/socket.c:2097 __do_sys_recvfrom net/socket.c:2115 [inline] __se_sys_recvfrom net/socket.c:2111 [inline] __x64_sys_recvfrom+0x19d/0x210 net/socket.c:2111 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3247 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4975 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1158 [inline] netlink_dump+0x3e5/0x16c0 net/netlink/af_netlink.c:2248 __netlink_dump_start+0xcf8/0xe90 net/netlink/af_netlink.c:2373 netlink_dump_start include/linux/netlink.h:254 [inline] inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1341 sock_diag_rcv_msg+0x24a/0x620 netlink_rcv_skb+0x40c/0x7e0 net/netlink/af_netlink.c:2494 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:277 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x1093/0x1360 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x14d9/0x1720 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] sock_write_iter+0x594/0x690 net/socket.c:1061 do_iter_readv_writev+0xa7f/0xc70 do_iter_write+0x52c/0x1500 fs/read_write.c:851 vfs_writev fs/read_write.c:924 [inline] do_writev+0x645/0xe00 fs/read_write.c:967 __do_sys_writev fs/read_write.c:1040 [inline] __se_sys_writev fs/read_write.c:1037 [inline] __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Bytes 68-71 of 2508 are uninitialized Memory access of size 2508 starts at ffff888114f9b000 Data copied to user address 00007f7fe09ff2e0 CPU: 1 PID: 3478 Comm: syz-executor306 Not tainted 5.17.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 | |||||
| CVE-2022-48856 | 1 Linux | 1 Linux Kernel | 2024-07-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: gianfar: ethtool: Fix refcount leak in gfar_get_ts_info The of_find_compatible_node() function returns a node pointer with refcount incremented, We should use of_node_put() on it when done Add the missing of_node_put() to release the refcount. | |||||
| CVE-2022-48857 | 1 Linux | 1 Linux Kernel | 2024-07-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: NFC: port100: fix use-after-free in port100_send_complete Syzbot reported UAF in port100_send_complete(). The root case is in missing usb_kill_urb() calls on error handling path of ->probe function. port100_send_complete() accesses devm allocated memory which will be freed on probe failure. We should kill this urbs before returning an error from probe function to prevent reported use-after-free Fail log: BUG: KASAN: use-after-free in port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935 Read of size 1 at addr ffff88801bb59540 by task ksoftirqd/2/26 ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935 __usb_hcd_giveback_urb+0x2b0/0x5c0 drivers/usb/core/hcd.c:1670 ... Allocated by task 1255: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:436 [inline] ____kasan_kmalloc mm/kasan/common.c:515 [inline] ____kasan_kmalloc mm/kasan/common.c:474 [inline] __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:524 alloc_dr drivers/base/devres.c:116 [inline] devm_kmalloc+0x96/0x1d0 drivers/base/devres.c:823 devm_kzalloc include/linux/device.h:209 [inline] port100_probe+0x8a/0x1320 drivers/nfc/port100.c:1502 Freed by task 1255: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free+0xff/0x140 mm/kasan/common.c:328 kasan_slab_free include/linux/kasan.h:236 [inline] __cache_free mm/slab.c:3437 [inline] kfree+0xf8/0x2b0 mm/slab.c:3794 release_nodes+0x112/0x1a0 drivers/base/devres.c:501 devres_release_all+0x114/0x190 drivers/base/devres.c:530 really_probe+0x626/0xcc0 drivers/base/dd.c:670 | |||||
| CVE-2022-48858 | 1 Linux | 1 Linux Kernel | 2024-07-23 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix a race on command flush flow Fix a refcount use after free warning due to a race on command entry. Such race occurs when one of the commands releases its last refcount and frees its index and entry while another process running command flush flow takes refcount to this command entry. The process which handles commands flush may see this command as needed to be flushed if the other process released its refcount but didn't release the index yet. Fix it by adding the needed spin lock. It fixes the following warning trace: refcount_t: addition on 0; use-after-free. WARNING: CPU: 11 PID: 540311 at lib/refcount.c:25 refcount_warn_saturate+0x80/0xe0 ... RIP: 0010:refcount_warn_saturate+0x80/0xe0 ... Call Trace: <TASK> mlx5_cmd_trigger_completions+0x293/0x340 [mlx5_core] mlx5_cmd_flush+0x3a/0xf0 [mlx5_core] enter_error_state+0x44/0x80 [mlx5_core] mlx5_fw_fatal_reporter_err_work+0x37/0xe0 [mlx5_core] process_one_work+0x1be/0x390 worker_thread+0x4d/0x3d0 ? rescuer_thread+0x350/0x350 kthread+0x141/0x160 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 </TASK> | |||||
| CVE-2022-48859 | 1 Linux | 1 Linux Kernel | 2024-07-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr This node pointer is returned by of_find_compatible_node() with refcount incremented. Calling of_node_put() to aovid the refcount leak. | |||||
| CVE-2022-48860 | 1 Linux | 1 Linux Kernel | 2024-07-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ethernet: Fix error handling in xemaclite_of_probe This node pointer is returned by of_parse_phandle() with refcount incremented in this function. Calling of_node_put() to avoid the refcount leak. As the remove function do. | |||||
| CVE-2022-48861 | 1 Linux | 1 Linux Kernel | 2024-07-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: vdpa: fix use-after-free on vp_vdpa_remove When vp_vdpa driver is unbind, vp_vdpa is freed in vdpa_unregister_device and then vp_vdpa->mdev.pci_dev is dereferenced in vp_modern_remove, triggering use-after-free. Call Trace of unbinding driver free vp_vdpa : do_syscall_64 vfs_write kernfs_fop_write_iter device_release_driver_internal pci_device_remove vp_vdpa_remove vdpa_unregister_device kobject_release device_release kfree Call Trace of dereference vp_vdpa->mdev.pci_dev: vp_modern_remove pci_release_selected_regions pci_release_region pci_resource_len pci_resource_end (dev)->resource[(bar)].end | |||||
| CVE-2022-48862 | 1 Linux | 1 Linux Kernel | 2024-07-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: vhost: fix hung thread due to erroneous iotlb entries In vhost_iotlb_add_range_ctx(), range size can overflow to 0 when start is 0 and last is ULONG_MAX. One instance where it can happen is when userspace sends an IOTLB message with iova=size=uaddr=0 (vhost_process_iotlb_msg). So, an entry with size = 0, start = 0, last = ULONG_MAX ends up in the iotlb. Next time a packet is sent, iotlb_access_ok() loops indefinitely due to that erroneous entry. Call Trace: <TASK> iotlb_access_ok+0x21b/0x3e0 drivers/vhost/vhost.c:1340 vq_meta_prefetch+0xbc/0x280 drivers/vhost/vhost.c:1366 vhost_transport_do_send_pkt+0xe0/0xfd0 drivers/vhost/vsock.c:104 vhost_worker+0x23d/0x3d0 drivers/vhost/vhost.c:372 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Reported by syzbot at: https://syzkaller.appspot.com/bug?extid=0abd373e2e50d704db87 To fix this, do two things: 1. Return -EINVAL in vhost_chr_write_iter() when userspace asks to map a range with size 0. 2. Fix vhost_iotlb_add_range_ctx() to handle the range [0, ULONG_MAX] by splitting it into two entries. | |||||
| CVE-2022-48863 | 1 Linux | 1 Linux Kernel | 2024-07-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mISDN: Fix memory leak in dsp_pipeline_build() dsp_pipeline_build() allocates dup pointer by kstrdup(cfg), but then it updates dup variable by strsep(&dup, "|"). As a result when it calls kfree(dup), the dup variable contains NULL. Found by Linux Driver Verification project (linuxtesting.org) with SVACE. | |||||
| CVE-2022-48864 | 1 Linux | 1 Linux Kernel | 2024-07-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command When control vq receives a VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command request from the driver, presently there is no validation against the number of queue pairs to configure, or even if multiqueue had been negotiated or not is unverified. This may lead to kernel panic due to uninitialized resource for the queues were there any bogus request sent down by untrusted driver. Tie up the loose ends there. | |||||
| CVE-2022-48865 | 1 Linux | 1 Linux Kernel | 2024-07-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix kernel panic when enabling bearer When enabling a bearer on a node, a kernel panic is observed: [ 4.498085] RIP: 0010:tipc_mon_prep+0x4e/0x130 [tipc] ... [ 4.520030] Call Trace: [ 4.520689] <IRQ> [ 4.521236] tipc_link_build_proto_msg+0x375/0x750 [tipc] [ 4.522654] tipc_link_build_state_msg+0x48/0xc0 [tipc] [ 4.524034] __tipc_node_link_up+0xd7/0x290 [tipc] [ 4.525292] tipc_rcv+0x5da/0x730 [tipc] [ 4.526346] ? __netif_receive_skb_core+0xb7/0xfc0 [ 4.527601] tipc_l2_rcv_msg+0x5e/0x90 [tipc] [ 4.528737] __netif_receive_skb_list_core+0x20b/0x260 [ 4.530068] netif_receive_skb_list_internal+0x1bf/0x2e0 [ 4.531450] ? dev_gro_receive+0x4c2/0x680 [ 4.532512] napi_complete_done+0x6f/0x180 [ 4.533570] virtnet_poll+0x29c/0x42e [virtio_net] ... The node in question is receiving activate messages in another thread after changing bearer status to allow message sending/ receiving in current thread: thread 1 | thread 2 -------- | -------- | tipc_enable_bearer() | test_and_set_bit_lock() | tipc_bearer_xmit_skb() | | tipc_l2_rcv_msg() | tipc_rcv() | __tipc_node_link_up() | tipc_link_build_state_msg() | tipc_link_build_proto_msg() | tipc_mon_prep() | { | ... | // null-pointer dereference | u16 gen = mon->dom_gen; | ... | } // Not being executed yet | tipc_mon_create() | { | ... | // allocate | mon = kzalloc(); | ... | } | Monitoring pointer in thread 2 is dereferenced before monitoring data is allocated in thread 1. This causes kernel panic. This commit fixes it by allocating the monitoring data before enabling the bearer to receive messages. | |||||
| CVE-2022-48866 | 1 Linux | 1 Linux Kernel | 2024-07-23 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: HID: hid-thrustmaster: fix OOB read in thrustmaster_interrupts Syzbot reported an slab-out-of-bounds Read in thrustmaster_probe() bug. The root case is in missing validation check of actual number of endpoints. Code should not blindly access usb_host_interface::endpoint array, since it may contain less endpoints than code expects. Fix it by adding missing validaion check and print an error if number of endpoints do not match expected number | |||||
| CVE-2024-41007 | 1 Linux | 1 Linux Kernel | 2024-07-19 | N/A | 3.3 LOW |
| In the Linux kernel, the following vulnerability has been resolved: tcp: avoid too many retransmit packets If a TCP socket is using TCP_USER_TIMEOUT, and the other peer retracted its window to zero, tcp_retransmit_timer() can retransmit a packet every two jiffies (2 ms for HZ=1000), for about 4 minutes after TCP_USER_TIMEOUT has 'expired'. The fix is to make sure tcp_rtx_probe0_timed_out() takes icsk->icsk_user_timeout into account. Before blamed commit, the socket would not timeout after icsk->icsk_user_timeout, but would use standard exponential backoff for the retransmits. Also worth noting that before commit e89688e3e978 ("net: tcp: fix unexcepted socket die when snd_wnd is 0"), the issue would last 2 minutes instead of 4. | |||||
| CVE-2024-41010 | 1 Linux | 1 Linux Kernel | 2024-07-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix too early release of tcx_entry Pedro Pinto and later independently also Hyunwoo Kim and Wongi Lee reported an issue that the tcx_entry can be released too early leading to a use after free (UAF) when an active old-style ingress or clsact qdisc with a shared tc block is later replaced by another ingress or clsact instance. Essentially, the sequence to trigger the UAF (one example) can be as follows: 1. A network namespace is created 2. An ingress qdisc is created. This allocates a tcx_entry, and &tcx_entry->miniq is stored in the qdisc's miniqp->p_miniq. At the same time, a tcf block with index 1 is created. 3. chain0 is attached to the tcf block. chain0 must be connected to the block linked to the ingress qdisc to later reach the function tcf_chain0_head_change_cb_del() which triggers the UAF. 4. Create and graft a clsact qdisc. This causes the ingress qdisc created in step 1 to be removed, thus freeing the previously linked tcx_entry: rtnetlink_rcv_msg() => tc_modify_qdisc() => qdisc_create() => clsact_init() [a] => qdisc_graft() => qdisc_destroy() => __qdisc_destroy() => ingress_destroy() [b] => tcx_entry_free() => kfree_rcu() // tcx_entry freed 5. Finally, the network namespace is closed. This registers the cleanup_net worker, and during the process of releasing the remaining clsact qdisc, it accesses the tcx_entry that was already freed in step 4, causing the UAF to occur: cleanup_net() => ops_exit_list() => default_device_exit_batch() => unregister_netdevice_many() => unregister_netdevice_many_notify() => dev_shutdown() => qdisc_put() => clsact_destroy() [c] => tcf_block_put_ext() => tcf_chain0_head_change_cb_del() => tcf_chain_head_change_item() => clsact_chain_head_change() => mini_qdisc_pair_swap() // UAF There are also other variants, the gist is to add an ingress (or clsact) qdisc with a specific shared block, then to replace that qdisc, waiting for the tcx_entry kfree_rcu() to be executed and subsequently accessing the current active qdisc's miniq one way or another. The correct fix is to turn the miniq_active boolean into a counter. What can be observed, at step 2 above, the counter transitions from 0->1, at step [a] from 1->2 (in order for the miniq object to remain active during the replacement), then in [b] from 2->1 and finally [c] 1->0 with the eventual release. The reference counter in general ranges from [0,2] and it does not need to be atomic since all access to the counter is protected by the rtnl mutex. With this in place, there is no longer a UAF happening and the tcx_entry is freed at the correct time. | |||||
| CVE-2022-48837 | 1 Linux | 1 Linux Kernel | 2024-07-18 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: rndis: prevent integer overflow in rndis_set_response() If "BufOffset" is very large the "BufOffset + 8" operation can have an integer overflow. | |||||
| CVE-2022-48839 | 1 Linux | 1 Linux Kernel | 2024-07-18 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/packet: fix slab-out-of-bounds access in packet_recvmsg() syzbot found that when an AF_PACKET socket is using PACKET_COPY_THRESH and mmap operations, tpacket_rcv() is queueing skbs with garbage in skb->cb[], triggering a too big copy [1] Presumably, users of af_packet using mmap() already gets correct metadata from the mapped buffer, we can simply make sure to clear 12 bytes that might be copied to user space later. BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:225 [inline] BUG: KASAN: stack-out-of-bounds in packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489 Write of size 165 at addr ffffc9000385fb78 by task syz-executor233/3631 CPU: 0 PID: 3631 Comm: syz-executor233 Not tainted 5.17.0-rc7-syzkaller-02396-g0b3660695e80 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0xf/0x336 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189 memcpy+0x39/0x60 mm/kasan/shadow.c:66 memcpy include/linux/fortify-string.h:225 [inline] packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_recvmsg net/socket.c:962 [inline] ____sys_recvmsg+0x2c4/0x600 net/socket.c:2632 ___sys_recvmsg+0x127/0x200 net/socket.c:2674 __sys_recvmsg+0xe2/0x1a0 net/socket.c:2704 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fdfd5954c29 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffcf8e71e48 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fdfd5954c29 RDX: 0000000000000000 RSI: 0000000020000500 RDI: 0000000000000005 RBP: 0000000000000000 R08: 000000000000000d R09: 000000000000000d R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffcf8e71e60 R13: 00000000000f4240 R14: 000000000000c1ff R15: 00007ffcf8e71e54 </TASK> addr ffffc9000385fb78 is located in stack of task syz-executor233/3631 at offset 32 in frame: ____sys_recvmsg+0x0/0x600 include/linux/uio.h:246 this frame has 1 object: [32, 160) 'addr' Memory state around the buggy address: ffffc9000385fa80: 00 04 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 ffffc9000385fb00: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 >ffffc9000385fb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f3 ^ ffffc9000385fc00: f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 f1 ffffc9000385fc80: f1 f1 f1 00 f2 f2 f2 00 f2 f2 f2 00 00 00 00 00 ================================================================== | |||||