Filtered by vendor Linux
Subscribe
Total
10566 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-50072 | 1 Linux | 1 Linux Kernel | 2024-11-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Use code segment selector for VERW operand Robert Gill reported below #GP in 32-bit mode when dosemu software was executing vm86() system call: general protection fault: 0000 [#1] PREEMPT SMP CPU: 4 PID: 4610 Comm: dosemu.bin Not tainted 6.6.21-gentoo-x86 #1 Hardware name: Dell Inc. PowerEdge 1950/0H723K, BIOS 2.7.0 10/30/2010 EIP: restore_all_switch_stack+0xbe/0xcf EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: ff8affdc DS: 0000 ES: 0000 FS: 0000 GS: 0033 SS: 0068 EFLAGS: 00010046 CR0: 80050033 CR2: 00c2101c CR3: 04b6d000 CR4: 000406d0 Call Trace: show_regs+0x70/0x78 die_addr+0x29/0x70 exc_general_protection+0x13c/0x348 exc_bounds+0x98/0x98 handle_exception+0x14d/0x14d exc_bounds+0x98/0x98 restore_all_switch_stack+0xbe/0xcf exc_bounds+0x98/0x98 restore_all_switch_stack+0xbe/0xcf This only happens in 32-bit mode when VERW based mitigations like MDS/RFDS are enabled. This is because segment registers with an arbitrary user value can result in #GP when executing VERW. Intel SDM vol. 2C documents the following behavior for VERW instruction: #GP(0) - If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. CLEAR_CPU_BUFFERS macro executes VERW instruction before returning to user space. Use %cs selector to reference VERW operand. This ensures VERW will not #GP for an arbitrary user %ds. [ mingo: Fixed the SOB chain. ] | |||||
| CVE-2024-44931 | 1 Linux | 1 Linux Kernel | 2024-11-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: gpio: prevent potential speculation leaks in gpio_device_get_desc() Userspace may trigger a speculative read of an address outside the gpio descriptor array. Users can do that by calling gpio_ioctl() with an offset out of range. Offset is copied from user and then used as an array index to get the gpio descriptor without sanitization in gpio_device_get_desc(). This change ensures that the offset is sanitized by using array_index_nospec() to mitigate any possibility of speculative information leaks. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. | |||||
| CVE-2024-49973 | 1 Linux | 1 Linux Kernel | 2024-11-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: r8169: add tally counter fields added with RTL8125 RTL8125 added fields to the tally counter, what may result in the chip dma'ing these new fields to unallocated memory. Therefore make sure that the allocated memory area is big enough to hold all of the tally counter values, even if we use only parts of it. | |||||
| CVE-2024-49879 | 1 Linux | 1 Linux Kernel | 2024-11-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm: omapdrm: Add missing check for alloc_ordered_workqueue As it may return NULL pointer and cause NULL pointer dereference. Add check for the return value of alloc_ordered_workqueue. | |||||
| CVE-2024-50045 | 1 Linux | 1 Linux Kernel | 2024-11-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: br_netfilter: fix panic with metadata_dst skb Fix a kernel panic in the br_netfilter module when sending untagged traffic via a VxLAN device. This happens during the check for fragmentation in br_nf_dev_queue_xmit. It is dependent on: 1) the br_netfilter module being loaded; 2) net.bridge.bridge-nf-call-iptables set to 1; 3) a bridge with a VxLAN (single-vxlan-device) netdevice as a bridge port; 4) untagged frames with size higher than the VxLAN MTU forwarded/flooded When forwarding the untagged packet to the VxLAN bridge port, before the netfilter hooks are called, br_handle_egress_vlan_tunnel is called and changes the skb_dst to the tunnel dst. The tunnel_dst is a metadata type of dst, i.e., skb_valid_dst(skb) is false, and metadata->dst.dev is NULL. Then in the br_netfilter hooks, in br_nf_dev_queue_xmit, there's a check for frames that needs to be fragmented: frames with higher MTU than the VxLAN device end up calling br_nf_ip_fragment, which in turns call ip_skb_dst_mtu. The ip_dst_mtu tries to use the skb_dst(skb) as if it was a valid dst with valid dst->dev, thus the crash. This case was never supported in the first place, so drop the packet instead. PING 10.0.0.2 (10.0.0.2) from 0.0.0.0 h1-eth0: 2000(2028) bytes of data. [ 176.291791] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000110 [ 176.292101] Mem abort info: [ 176.292184] ESR = 0x0000000096000004 [ 176.292322] EC = 0x25: DABT (current EL), IL = 32 bits [ 176.292530] SET = 0, FnV = 0 [ 176.292709] EA = 0, S1PTW = 0 [ 176.292862] FSC = 0x04: level 0 translation fault [ 176.293013] Data abort info: [ 176.293104] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 176.293488] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 176.293787] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 176.293995] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000043ef5000 [ 176.294166] [0000000000000110] pgd=0000000000000000, p4d=0000000000000000 [ 176.294827] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 176.295252] Modules linked in: vxlan ip6_udp_tunnel udp_tunnel veth br_netfilter bridge stp llc ipv6 crct10dif_ce [ 176.295923] CPU: 0 PID: 188 Comm: ping Not tainted 6.8.0-rc3-g5b3fbd61b9d1 #2 [ 176.296314] Hardware name: linux,dummy-virt (DT) [ 176.296535] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 176.296808] pc : br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.297382] lr : br_nf_dev_queue_xmit+0x2ac/0x4ec [br_netfilter] [ 176.297636] sp : ffff800080003630 [ 176.297743] x29: ffff800080003630 x28: 0000000000000008 x27: ffff6828c49ad9f8 [ 176.298093] x26: ffff6828c49ad000 x25: 0000000000000000 x24: 00000000000003e8 [ 176.298430] x23: 0000000000000000 x22: ffff6828c4960b40 x21: ffff6828c3b16d28 [ 176.298652] x20: ffff6828c3167048 x19: ffff6828c3b16d00 x18: 0000000000000014 [ 176.298926] x17: ffffb0476322f000 x16: ffffb7e164023730 x15: 0000000095744632 [ 176.299296] x14: ffff6828c3f1c880 x13: 0000000000000002 x12: ffffb7e137926a70 [ 176.299574] x11: 0000000000000001 x10: ffff6828c3f1c898 x9 : 0000000000000000 [ 176.300049] x8 : ffff6828c49bf070 x7 : 0008460f18d5f20e x6 : f20e0100bebafeca [ 176.300302] x5 : ffff6828c7f918fe x4 : ffff6828c49bf070 x3 : 0000000000000000 [ 176.300586] x2 : 0000000000000000 x1 : ffff6828c3c7ad00 x0 : ffff6828c7f918f0 [ 176.300889] Call trace: [ 176.301123] br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.301411] br_nf_post_routing+0x2a8/0x3e4 [br_netfilter] [ 176.301703] nf_hook_slow+0x48/0x124 [ 176.302060] br_forward_finish+0xc8/0xe8 [bridge] [ 176.302371] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.302605] br_nf_forward_finish+0x118/0x22c [br_netfilter] [ 176.302824] br_nf_forward_ip.part.0+0x264/0x290 [br_netfilter] [ 176.303136] br_nf_forward+0x2b8/0x4e0 [br_netfilter] [ 176.303359] nf_hook_slow+0x48/0x124 [ 176.303 ---truncated--- | |||||
| CVE-2024-47697 | 1 Linux | 1 Linux Kernel | 2024-11-08 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drivers: media: dvb-frontends/rtl2830: fix an out-of-bounds write error Ensure index in rtl2830_pid_filter does not exceed 31 to prevent out-of-bounds access. dev->filters is a 32-bit value, so set_bit and clear_bit functions should only operate on indices from 0 to 31. If index is 32, it will attempt to access a non-existent 33rd bit, leading to out-of-bounds access. Change the boundary check from index > 32 to index >= 32 to resolve this issue. | |||||
| CVE-2024-47749 | 1 Linux | 1 Linux Kernel | 2024-11-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Added NULL check for lookup_atid The lookup_atid() function can return NULL if the ATID is invalid or does not exist in the identifier table, which could lead to dereferencing a null pointer without a check in the `act_establish()` and `act_open_rpl()` functions. Add a NULL check to prevent null pointer dereferencing. Found by Linux Verification Center (linuxtesting.org) with SVACE. | |||||
| CVE-2024-49924 | 1 Linux | 1 Linux Kernel | 2024-11-08 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: pxafb: Fix possible use after free in pxafb_task() In the pxafb_probe function, it calls the pxafb_init_fbinfo function, after which &fbi->task is associated with pxafb_task. Moreover, within this pxafb_init_fbinfo function, the pxafb_blank function within the &pxafb_ops struct is capable of scheduling work. If we remove the module which will call pxafb_remove to make cleanup, it will call unregister_framebuffer function which can call do_unregister_framebuffer to free fbi->fb through put_fb_info(fb_info), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | pxafb_task pxafb_remove | unregister_framebuffer(info) | do_unregister_framebuffer(fb_info) | put_fb_info(fb_info) | // free fbi->fb | set_ctrlr_state(fbi, state) | __pxafb_lcd_power(fbi, 0) | fbi->lcd_power(on, &fbi->fb.var) | //use fbi->fb Fix it by ensuring that the work is canceled before proceeding with the cleanup in pxafb_remove. Note that only root user can remove the driver at runtime. | |||||
| CVE-2024-50059 | 1 Linux | 1 Linux Kernel | 2024-11-08 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition In the switchtec_ntb_add function, it can call switchtec_ntb_init_sndev function, then &sndev->check_link_status_work is bound with check_link_status_work. switchtec_ntb_link_notification may be called to start the work. If we remove the module which will call switchtec_ntb_remove to make cleanup, it will free sndev through kfree(sndev), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | check_link_status_work switchtec_ntb_remove | kfree(sndev); | | if (sndev->link_force_down) | // use sndev Fix it by ensuring that the work is canceled before proceeding with the cleanup in switchtec_ntb_remove. | |||||
| CVE-2024-50074 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2024-11-08 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: parport: Proper fix for array out-of-bounds access The recent fix for array out-of-bounds accesses replaced sprintf() calls blindly with snprintf(). However, since snprintf() returns the would-be-printed size, not the actually output size, the length calculation can still go over the given limit. Use scnprintf() instead of snprintf(), which returns the actually output letters, for addressing the potential out-of-bounds access properly. | |||||
| CVE-2024-50082 | 1 Linux | 1 Linux Kernel | 2024-11-08 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race We're seeing crashes from rq_qos_wake_function that look like this: BUG: unable to handle page fault for address: ffffafe180a40084 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0 Oops: Oops: 0002 [#1] PREEMPT SMP PTI CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40 Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00 RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084 RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011 R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002 R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> try_to_wake_up+0x5a/0x6a0 rq_qos_wake_function+0x71/0x80 __wake_up_common+0x75/0xa0 __wake_up+0x36/0x60 scale_up.part.0+0x50/0x110 wb_timer_fn+0x227/0x450 ... So rq_qos_wake_function() calls wake_up_process(data->task), which calls try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock). p comes from data->task, and data comes from the waitqueue entry, which is stored on the waiter's stack in rq_qos_wait(). Analyzing the core dump with drgn, I found that the waiter had already woken up and moved on to a completely unrelated code path, clobbering what was previously data->task. Meanwhile, the waker was passing the clobbered garbage in data->task to wake_up_process(), leading to the crash. What's happening is that in between rq_qos_wake_function() deleting the waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding that it already got a token and returning. The race looks like this: rq_qos_wait() rq_qos_wake_function() ============================================================== prepare_to_wait_exclusive() data->got_token = true; list_del_init(&curr->entry); if (data.got_token) break; finish_wait(&rqw->wait, &data.wq); ^- returns immediately because list_empty_careful(&wq_entry->entry) is true ... return, go do something else ... wake_up_process(data->task) (NO LONGER VALID!)-^ Normally, finish_wait() is supposed to synchronize against the waker. But, as noted above, it is returning immediately because the waitqueue entry has already been removed from the waitqueue. The bug is that rq_qos_wake_function() is accessing the waitqueue entry AFTER deleting it. Note that autoremove_wake_function() wakes the waiter and THEN deletes the waitqueue entry, which is the proper order. Fix it by swapping the order. We also need to use list_del_init_careful() to match the list_empty_careful() in finish_wait(). | |||||
| CVE-2024-47696 | 1 Linux | 1 Linux Kernel | 2024-11-08 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix WARNING:at_kernel/workqueue.c:#check_flush_dependency In the commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs"), the function flush_workqueue is invoked to flush the work queue iwcm_wq. But at that time, the work queue iwcm_wq was created via the function alloc_ordered_workqueue without the flag WQ_MEM_RECLAIM. Because the current process is trying to flush the whole iwcm_wq, if iwcm_wq doesn't have the flag WQ_MEM_RECLAIM, verify that the current process is not reclaiming memory or running on a workqueue which doesn't have the flag WQ_MEM_RECLAIM as that can break forward-progress guarantee leading to a deadlock. The call trace is as below: [ 125.350876][ T1430] Call Trace: [ 125.356281][ T1430] <TASK> [ 125.361285][ T1430] ? __warn (kernel/panic.c:693) [ 125.367640][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9)) [ 125.375689][ T1430] ? report_bug (lib/bug.c:180 lib/bug.c:219) [ 125.382505][ T1430] ? handle_bug (arch/x86/kernel/traps.c:239) [ 125.388987][ T1430] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1)) [ 125.395831][ T1430] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [ 125.403125][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9)) [ 125.410984][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9)) [ 125.418764][ T1430] __flush_workqueue (kernel/workqueue.c:3970) [ 125.426021][ T1430] ? __pfx___might_resched (kernel/sched/core.c:10151) [ 125.433431][ T1430] ? destroy_cm_id (drivers/infiniband/core/iwcm.c:375) iw_cm [ 125.441209][ T1430] ? __pfx___flush_workqueue (kernel/workqueue.c:3910) [ 125.473900][ T1430] ? _raw_spin_lock_irqsave (arch/x86/include/asm/atomic.h:107 include/linux/atomic/atomic-arch-fallback.h:2170 include/linux/atomic/atomic-instrumented.h:1302 include/asm-generic/qspinlock.h:111 include/linux/spinlock.h:187 include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 125.473909][ T1430] ? __pfx__raw_spin_lock_irqsave (kernel/locking/spinlock.c:161) [ 125.482537][ T1430] _destroy_id (drivers/infiniband/core/cma.c:2044) rdma_cm [ 125.495072][ T1430] nvme_rdma_free_queue (drivers/nvme/host/rdma.c:656 drivers/nvme/host/rdma.c:650) nvme_rdma [ 125.505827][ T1430] nvme_rdma_reset_ctrl_work (drivers/nvme/host/rdma.c:2180) nvme_rdma [ 125.505831][ T1430] process_one_work (kernel/workqueue.c:3231) [ 125.515122][ T1430] worker_thread (kernel/workqueue.c:3306 kernel/workqueue.c:3393) [ 125.515127][ T1430] ? __pfx_worker_thread (kernel/workqueue.c:3339) [ 125.531837][ T1430] kthread (kernel/kthread.c:389) [ 125.539864][ T1430] ? __pfx_kthread (kernel/kthread.c:342) [ 125.550628][ T1430] ret_from_fork (arch/x86/kernel/process.c:147) [ 125.558840][ T1430] ? __pfx_kthread (kernel/kthread.c:342) [ 125.558844][ T1430] ret_from_fork_asm (arch/x86/entry/entry_64.S:257) [ 125.566487][ T1430] </TASK> [ 125.566488][ T1430] ---[ end trace 0000000000000000 ]--- | |||||
| CVE-2024-49955 | 1 Linux | 1 Linux Kernel | 2024-11-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: battery: Fix possible crash when unregistering a battery hook When a battery hook returns an error when adding a new battery, then the battery hook is automatically unregistered. However the battery hook provider cannot know that, so it will later call battery_hook_unregister() on the already unregistered battery hook, resulting in a crash. Fix this by using the list head to mark already unregistered battery hooks as already being unregistered so that they can be ignored by battery_hook_unregister(). | |||||
| CVE-2024-0134 | 2 Linux, Nvidia | 3 Linux Kernel, Nvidia Container Toolkit, Nvidia Gpu Operator | 2024-11-08 | N/A | 4.1 MEDIUM |
| NVIDIA Container Toolkit and NVIDIA GPU Operator for Linux contain a UNIX vulnerability where a specially crafted container image can lead to the creation of unauthorized files on the host. The name and location of the files cannot be controlled by an attacker. A successful exploit of this vulnerability might lead to data tampering. | |||||
| CVE-2024-0129 | 4 Apple, Linux, Microsoft and 1 more | 4 Macos, Linux Kernel, Windows and 1 more | 2024-11-08 | N/A | 7.8 HIGH |
| NVIDIA NeMo contains a vulnerability in SaveRestoreConnector where a user may cause a path traversal issue via an unsafe .tar file extraction. A successful exploit of this vulnerability may lead to code execution and data tampering. | |||||
| CVE-2024-50135 | 1 Linux | 1 Linux Kernel | 2024-11-08 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix race condition between reset and nvme_dev_disable() nvme_dev_disable() modifies the dev->online_queues field, therefore nvme_pci_update_nr_queues() should avoid racing against it, otherwise we could end up passing invalid values to blk_mq_update_nr_hw_queues(). WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347 pci_irq_get_affinity+0x187/0x210 Workqueue: nvme-reset-wq nvme_reset_work [nvme] RIP: 0010:pci_irq_get_affinity+0x187/0x210 Call Trace: <TASK> ? blk_mq_pci_map_queues+0x87/0x3c0 ? pci_irq_get_affinity+0x187/0x210 blk_mq_pci_map_queues+0x87/0x3c0 nvme_pci_map_queues+0x189/0x460 [nvme] blk_mq_update_nr_hw_queues+0x2a/0x40 nvme_reset_work+0x1be/0x2a0 [nvme] Fix the bug by locking the shutdown_lock mutex before using dev->online_queues. Give up if nvme_dev_disable() is running or if it has been executed already. | |||||
| CVE-2024-50136 | 1 Linux | 1 Linux Kernel | 2024-11-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Unregister notifier on eswitch init failure It otherwise remains registered and a subsequent attempt at eswitch enabling might trigger warnings of the sort: [ 682.589148] ------------[ cut here ]------------ [ 682.590204] notifier callback eswitch_vport_event [mlx5_core] already registered [ 682.590256] WARNING: CPU: 13 PID: 2660 at kernel/notifier.c:31 notifier_chain_register+0x3e/0x90 [...snipped] [ 682.610052] Call Trace: [ 682.610369] <TASK> [ 682.610663] ? __warn+0x7c/0x110 [ 682.611050] ? notifier_chain_register+0x3e/0x90 [ 682.611556] ? report_bug+0x148/0x170 [ 682.611977] ? handle_bug+0x36/0x70 [ 682.612384] ? exc_invalid_op+0x13/0x60 [ 682.612817] ? asm_exc_invalid_op+0x16/0x20 [ 682.613284] ? notifier_chain_register+0x3e/0x90 [ 682.613789] atomic_notifier_chain_register+0x25/0x40 [ 682.614322] mlx5_eswitch_enable_locked+0x1d4/0x3b0 [mlx5_core] [ 682.614965] mlx5_eswitch_enable+0xc9/0x100 [mlx5_core] [ 682.615551] mlx5_device_enable_sriov+0x25/0x340 [mlx5_core] [ 682.616170] mlx5_core_sriov_configure+0x50/0x170 [mlx5_core] [ 682.616789] sriov_numvfs_store+0xb0/0x1b0 [ 682.617248] kernfs_fop_write_iter+0x117/0x1a0 [ 682.617734] vfs_write+0x231/0x3f0 [ 682.618138] ksys_write+0x63/0xe0 [ 682.618536] do_syscall_64+0x4c/0x100 [ 682.618958] entry_SYSCALL_64_after_hwframe+0x4b/0x53 | |||||
| CVE-2024-50129 | 1 Linux | 1 Linux Kernel | 2024-11-07 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: pse-pd: Fix out of bound for loop Adjust the loop limit to prevent out-of-bounds access when iterating over PI structures. The loop should not reach the index pcdev->nr_lines since we allocate exactly pcdev->nr_lines number of PI structures. This fix ensures proper bounds are maintained during iterations. | |||||
| CVE-2024-50132 | 1 Linux | 1 Linux Kernel | 2024-11-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Fix MAX_TRACE_ARGS limit handling When creating a trace_probe we would set nr_args prior to truncating the arguments to MAX_TRACE_ARGS. However, we would only initialize arguments up to the limit. This caused invalid memory access when attempting to set up probes with more than 128 fetchargs. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 UID: 0 PID: 1769 Comm: cat Not tainted 6.11.0-rc7+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 RIP: 0010:__set_print_fmt+0x134/0x330 Resolve the issue by applying the MAX_TRACE_ARGS limit earlier. Return an error when there are too many arguments instead of silently truncating. | |||||
| CVE-2024-50133 | 1 Linux | 1 Linux Kernel | 2024-11-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Don't crash in stack_top() for tasks without vDSO Not all tasks have a vDSO mapped, for example kthreads never do. If such a task ever ends up calling stack_top(), it will derefence the NULL vdso pointer and crash. This can for example happen when using kunit: [<9000000000203874>] stack_top+0x58/0xa8 [<90000000002956cc>] arch_pick_mmap_layout+0x164/0x220 [<90000000003c284c>] kunit_vm_mmap_init+0x108/0x12c [<90000000003c1fbc>] __kunit_add_resource+0x38/0x8c [<90000000003c2704>] kunit_vm_mmap+0x88/0xc8 [<9000000000410b14>] usercopy_test_init+0xbc/0x25c [<90000000003c1db4>] kunit_try_run_case+0x5c/0x184 [<90000000003c3d54>] kunit_generic_run_threadfn_adapter+0x24/0x48 [<900000000022e4bc>] kthread+0xc8/0xd4 [<9000000000200ce8>] ret_from_kernel_thread+0xc/0xa4 | |||||