Filtered by vendor Cisco
Subscribe
Total
6480 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2019-1763 | 1 Cisco | 8 Ip Conference Phone 8832, Ip Conference Phone 8832 Firmware, Ip Phone 8800 and 5 more | 2020-10-08 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the web-based management interface of Session Initiation Protocol (SIP) Software for Cisco IP Phone 8800 Series could allow an unauthenticated, remote attacker to bypass authorization, access critical services, and cause a denial of service (DoS) condition. The vulnerability exists because the software fails to sanitize URLs before it handles requests. An attacker could exploit this vulnerability by submitting a crafted URL. A successful exploit could allow the attacker to gain unauthorized access to critical services and cause a DoS condition. This vulnerability affects Cisco IP Phone 8800 Series products running a SIP Software release prior to 11.0(5) for Wireless IP Phone 8821 and 8821-EX; and 12.5(1)SR1 for the IP Conference Phone 8832 and the rest of the IP Phone 8800 Series. Cisco IP Conference Phone 8831 is not affected. | |||||
| CVE-2019-1603 | 1 Cisco | 6 Nexus 3000, Nexus 3500, Nexus 3600 and 3 more | 2020-10-08 | 4.6 MEDIUM | 7.8 HIGH |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to escalate lower-level privileges to the administrator level. The vulnerability is due to insufficient authorization enforcement. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. A successful exploit could allow an attacker to make configuration changes to the system as administrator. Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). | |||||
| CVE-2019-1602 | 1 Cisco | 6 Nexus 3000, Nexus 3500, Nexus 3600 and 3 more | 2020-10-08 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the filesystem permissions of Cisco NX-OS Software could allow an authenticated, local attacker to access sensitive data that could be used to elevate their privileges to administrator. The vulnerability is due to improper implementation of filesystem permissions. An attacker could exploit this vulnerability by logging in to the CLI of an affected device, accessing a specific file, and leveraging this information to authenticate to the NX-API server. A successful exploit could allow an attacker to make configuration changes as administrator. Note: NX-API is disabled by default. Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). | |||||
| CVE-2019-1601 | 1 Cisco | 13 Mds 9000, Nexus 2000, Nexus 3000 and 10 more | 2020-10-08 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the filesystem permissions of Cisco NX-OS Software could allow an authenticated, local attacker to gain read and write access to a critical configuration file. The vulnerability is due to a failure to impose strict filesystem permissions on the targeted device. An attacker could exploit this vulnerability by accessing and modifying restricted files. A successful exploit could allow an attacker to use the content of this configuration file to bypass authentication and log in as any user of the device. MDS 9000 Series Multilayer Switches are affected in versions prior to 6.2(25), 8.1(1b), and 8.3(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 6.0(2)A8(10) and 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.1(5)N1(1b) and 7.3(3)N1(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 7.3(3)D1(1), and 8.2(3). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). | |||||
| CVE-2019-1599 | 1 Cisco | 15 Nexus 1000v, Nexus 3000, Nexus 3500 and 12 more | 2020-10-08 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the network stack of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to an issue with allocating and freeing memory buffers in the network stack. An attacker could exploit this vulnerability by sending crafted TCP streams to an affected device in a sustained way. A successful exploit could cause the network stack of an affected device to run out of available buffers, impairing operations of control plane and management plane protocols, resulting in a DoS condition. Note: This vulnerability can be triggered only by traffic that is destined to an affected device and cannot be exploited using traffic that transits an affected device. Nexus 1000V Switch for Microsoft Hyper-V is affected in versions prior to 5.2(1)SM3(2.1). Nexus 1000V Switch for VMware vSphere is affected in versions prior to 5.2(1)SV3(4.1a). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(6) and 9.2(2). Nexus 3500 Platform Switches are affected in versions prior to 6.0(2)A8(11), 7.0(3)I7(6), and 9.2(2). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5) and 9.2(2). Nexus 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.1(5)N1(1b) and 7.3(5)N1(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22. Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5) and 9.2(2). UCS 6200 and 6300 Series Fabric Interconnect are affected in versions prior to 3.2(3j) and 4.0(2a). UCS 6400 Series Fabric Interconnect are affected in versions prior to 4.0(2a). | |||||
| CVE-2019-1596 | 1 Cisco | 6 Nexus 3000, Nexus 3500, Nexus 3600 and 3 more | 2020-10-08 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the Bash shell implementation for Cisco NX-OS Software could allow an authenticated, local attacker to escalate their privilege level to root. The attacker must authenticate with valid user credentials. The vulnerability is due to incorrect permissions of a system executable. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the Bash prompt. A successful exploit could allow the attacker to escalate their privilege level to root. Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). | |||||
| CVE-2019-1593 | 1 Cisco | 9 Nexus 3000, Nexus 3500, Nexus 3600 and 6 more | 2020-10-08 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the Bash shell implementation for Cisco NX-OS Software could allow an authenticated, local attacker to escalate their privilege level by executing commands authorized to other user roles. The attacker must authenticate with valid user credentials. The vulnerability is due to the incorrect implementation of a Bash shell command that allows role-based access control (RBAC) to be bypassed. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the Bash prompt. A successful exploit could allow the attacker to escalate their privilege level by executing commands that should be restricted to other roles. For example, a dev-ops user could escalate their privilege level to admin with a successful exploit of this vulnerability. | |||||
| CVE-2019-1591 | 1 Cisco | 2 Nexus 9000, Nx-os | 2020-10-08 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in a specific CLI command implementation of Cisco Nexus 9000 Series ACI Mode Switch Software could allow an authenticated, local attacker to escape a restricted shell on an affected device. The vulnerability is due to insufficient sanitization of user-supplied input when issuing a specific CLI command with parameters on an affected device. An attacker could exploit this vulnerability by authenticating to the device CLI and issuing certain commands. A successful exploit could allow the attacker to escape the restricted shell and execute arbitrary commands with root-level privileges on the affected device. This vulnerability only affects Cisco Nexus 9000 Series ACI Mode Switches that are running a release prior to 14.0(3d). | |||||
| CVE-2020-3509 | 1 Cisco | 2 Cbr-8, Ios Xe | 2020-10-08 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the DHCP message handler of Cisco IOS XE Software for Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, remote attacker to cause the supervisor to crash, which could result in a denial of service (DoS) condition. The vulnerability is due to insufficient error handling when DHCP version 4 (DHCPv4) messages are parsed. An attacker could exploit this vulnerability by sending a malicious DHCPv4 message to or through a WAN interface of an affected device. A successful exploit could allow the attacker to cause a reload of the affected device. Note: On Cisco cBR-8 Converged Broadband Routers, all of the following are considered WAN interfaces: 10 Gbps Ethernet interfaces 100 Gbps Ethernet interfaces Port channel interfaces that include multiple 10 and/or 100 Gbps Ethernet interfaces | |||||
| CVE-2019-12622 | 1 Cisco | 7 Roomos, Telepresence Codec C40, Telepresence Codec C40 Firmware and 4 more | 2020-10-08 | 2.1 LOW | 5.5 MEDIUM |
| A vulnerability in Cisco RoomOS Software could allow an authenticated, local attacker to write files to the underlying filesystem with root privileges. The vulnerability is due to insufficient permission restrictions on a specific process. An attacker could exploit this vulnerability by logging in to an affected device with remote support credentials and initiating the specific process on the device and sending crafted data to that process. A successful exploit could allow the attacker to write files to the underlying file system with root privileges. | |||||
| CVE-2019-12626 | 1 Cisco | 1 Unified Contact Center Express | 2020-10-08 | 3.5 LOW | 4.8 MEDIUM |
| A vulnerability in the web-based management interface of Cisco Unified Contact Center Express (Unified CCX) could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker needs valid administrator credentials. | |||||
| CVE-2019-12627 | 1 Cisco | 29 Amp 7150, Amp 8150, Firepower 7010 and 26 more | 2020-10-08 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the application policy configuration of the Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain unauthorized read access to sensitive data. The vulnerability is due to insufficient application identification. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain unauthorized read access to sensitive data. | |||||
| CVE-2019-12629 | 1 Cisco | 8 Sd-wan Firmware, Vedge-100, Vedge-1000 and 5 more | 2020-10-08 | 9.0 HIGH | 7.2 HIGH |
| A vulnerability in the WebUI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. The vulnerability is due to insufficient input validation of data parameters for certain fields in the affected solution. An attacker could exploit this vulnerability by configuring a malicious username on the login page of the affected solution. A successful exploit could allow the attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. | |||||
| CVE-2019-12632 | 1 Cisco | 1 Finesse | 2020-10-08 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in Cisco Finesse could allow an unauthenticated, remote attacker to bypass access controls and conduct a server-side request forgery (SSRF) attack on an affected system. The vulnerability exists because the affected system does not properly validate user-supplied input. An attacker could exploit this vulnerability by sending a crafted request to a user of the web application. A successful exploit could allow the attacker to access the system and perform unauthorized actions. | |||||
| CVE-2019-15959 | 1 Cisco | 10 Spa500 Series Ip Phones Firmware, Spa500ds, Spa500s and 7 more | 2020-10-08 | 4.6 MEDIUM | 6.6 MEDIUM |
| A vulnerability in Cisco Small Business SPA500 Series IP Phones could allow a physically proximate attacker to execute arbitrary commands on the device. The vulnerability is due to the presence of development testing and verification scripts that remained on the device. An attacker could exploit this vulnerability by accessing the physical interface of a device and inserting a USB storage device. A successful exploit could allow the attacker to execute scripts on the device in an elevated security context. | |||||
| CVE-2019-12634 | 1 Cisco | 3 Integrated Management Controller Supervisor, Ucs Director, Ucs Director Express For Big Data | 2020-10-08 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a missing authentication check in an API call. An attacker who can send a request to an affected system could cause all currently authenticated users to be logged off. Repeated exploitation could cause the inability to maintain a session in the web-based management portal. | |||||
| CVE-2019-12635 | 1 Cisco | 1 Content Security Management Appliance | 2020-10-08 | 3.5 LOW | 4.3 MEDIUM |
| A vulnerability in the authorization module of Cisco Content Security Management Appliance (SMA) Software could allow an authenticated, remote attacker to gain out-of-scope access to email. The vulnerability exists because the affected software does not correctly implement role permission controls. An attacker could exploit this vulnerability by using a custom role with specific permissions. A successful exploit could allow the attacker to access the spam quarantine of other users. | |||||
| CVE-2019-12633 | 1 Cisco | 1 Unified Contact Center Express | 2020-10-08 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in Cisco Unified Contact Center Express (Unified CCX) could allow an unauthenticated, remote attacker to bypass access controls and conduct a server-side request forgery (SSRF) attack on a targeted system. The vulnerability is due to improper validation of user-supplied input on the affected system. An attacker could exploit this vulnerability by sending the user of the web application a crafted request. If the request is processed, the attacker could access the system and perform unauthorized actions. | |||||
| CVE-2019-12645 | 1 Cisco | 1 Jabber | 2020-10-08 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in Cisco Jabber Client Framework (JCF) for Mac Software, installed as part of the Cisco Jabber for Mac client, could allow an authenticated, local attacker to execute arbitrary code on an affected device The vulnerability is due to improper file level permissions on an affected device when it is running Cisco JCF for Mac Software. An attacker could exploit this vulnerability by authenticating to the affected device and executing arbitrary code or potentially modifying certain configuration files. A successful exploit could allow the attacker to execute arbitrary code or modify certain configuration files on the device using the privileges of the installed Cisco JCF for Mac Software. | |||||
| CVE-2019-12652 | 1 Cisco | 6 Catalyst 4500 Supervisor Engine 6-e, Catalyst 4500 Supervisor Engine 6l-e, Catalyst 4900m and 3 more | 2020-10-08 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the ingress packet processing function of Cisco IOS Software for Cisco Catalyst 4000 Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper resource allocation when processing TCP packets directed to the device on specific Cisco Catalyst 4000 Series Switches. An attacker could exploit this vulnerability by sending crafted TCP streams to an affected device. A successful exploit could cause the affected device to run out of buffer resources, impairing operations of control plane and management plane protocols, resulting in a DoS condition. This vulnerability can be triggered only by traffic that is destined to an affected device and cannot be exploited using traffic that transits an affected device. | |||||