Filtered by vendor Cisco
Subscribe
Total
6480 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2019-12650 | 1 Cisco | 79 1100-4p Integrated Services Router, 1100-8p Integrated Services Router, 1101-4p Integrated Services Router and 76 more | 2023-05-22 | 9.0 HIGH | 8.8 HIGH |
| Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory. | |||||
| CVE-2020-3299 | 2 Cisco, Snort | 16 1100-4p, 1100-8p, 1101-4p and 13 more | 2023-05-22 | 5.0 MEDIUM | 5.8 MEDIUM |
| Multiple Cisco products are affected by a vulnerability in the Snort detection engine that could allow an unauthenticated, remote attacker to bypass a configured File Policy for HTTP. The vulnerability is due to incorrect detection of modified HTTP packets used in chunked responses. An attacker could exploit this vulnerability by sending crafted HTTP packets through an affected device. A successful exploit could allow the attacker to bypass a configured File Policy for HTTP packets and deliver a malicious payload. | |||||
| CVE-2020-3524 | 1 Cisco | 26 4221 Integrated Services Router, 4331 Integrated Services Router, 4431 Integrated Services Router and 23 more | 2023-05-22 | 6.9 MEDIUM | 6.8 MEDIUM |
| A vulnerability in the Cisco IOS XE ROM Monitor (ROMMON) Software for Cisco 4000 Series Integrated Services Routers, Cisco ASR 920 Series Aggregation Services Routers, Cisco ASR 1000 Series Aggregation Services Routers, and Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, physical attacker to break the chain of trust and load a compromised software image on an affected device. The vulnerability is due to the presence of a debugging configuration option in the affected software. An attacker could exploit this vulnerability by connecting to an affected device through the console, forcing the device into ROMMON mode, and writing a malicious pattern using that specific option on the device. A successful exploit could allow the attacker to break the chain of trust and load a compromised software image on the affected device. A compromised software image is any software image that has not been digitally signed by Cisco. | |||||
| CVE-2019-12646 | 1 Cisco | 13 1100-4p, 1100-8p, 1101-4p and 10 more | 2023-05-22 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the Network Address Translation (NAT) Session Initiation Protocol (SIP) Application Layer Gateway (ALG) of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to improper processing of transient SIP packets on which NAT is performed on an affected device. An attacker could exploit this vulnerability by using UDP port 5060 to send crafted SIP packets through an affected device that is performing NAT for SIP packets. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition. | |||||
| CVE-2020-3414 | 1 Cisco | 2 4461 Integrated Services Router, Ios Xe | 2023-05-22 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the packet processing of Cisco IOS XE Software for Cisco 4461 Integrated Services Routers could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect processing of IPv4 or IPv6 traffic to or through an affected device. An attacker could exploit this vulnerability by sending IP traffic to or through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. | |||||
| CVE-2020-3428 | 1 Cisco | 74 1100 Integrated Services Router, 1101 Integrated Services Router, 1109 Integrated Services Router and 71 more | 2023-05-22 | 6.1 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the WLAN Local Profiling feature of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect parsing of HTTP packets while performing HTTP-based endpoint device classifications. An attacker could exploit this vulnerability by sending a crafted HTTP packet to an affected device. A successful exploit could cause an affected device to reboot, resulting in a DoS condition. | |||||
| CVE-2019-16011 | 1 Cisco | 16 1100 Integrated Services Router, 4221 Integrated Services Router, 4331 Integrated Services Router and 13 more | 2023-05-22 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI utility. The attacker must be authenticated to access the CLI utility. A successful exploit could allow the attacker to execute commands with root privileges. | |||||
| CVE-2020-3214 | 1 Cisco | 106 1100 Integrated Services Router, 1101 Integrated Services Router, 1109 Integrated Services Router and 103 more | 2023-05-22 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to escalate their privileges to a user with root-level privileges. The vulnerability is due to insufficient validation of user-supplied content. This vulnerability could allow an attacker to load malicious software onto an affected device. | |||||
| CVE-2018-0150 | 1 Cisco | 3 4431 Integrated Services Router, 4451 Integrated Services Router, Ios Xe | 2023-05-22 | 10.0 HIGH | 9.8 CRITICAL |
| A vulnerability in Cisco IOS XE Software could allow an unauthenticated, remote attacker to log in to a device running an affected release of Cisco IOS XE Software with the default username and password that are used at initial boot, aka a Static Credential Vulnerability. The vulnerability is due to an undocumented user account with privilege level 15 that has a default username and password. An attacker could exploit this vulnerability by using this account to remotely connect to an affected device. A successful exploit could allow the attacker to log in to the device with privilege level 15 access. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software Release 16.x. This vulnerability does not affect Cisco IOS XE Software releases prior to Release 16.x. Cisco Bug IDs: CSCve89880. | |||||
| CVE-2015-6289 | 1 Cisco | 4 800 Integrated Services Router, 819 Integrated Services Router, 829 Integrated Services Router and 1 more | 2023-05-22 | 5.0 MEDIUM | 7.5 HIGH |
| Cisco IOS 15.5(3)M on Integrated Services Router (ISR) 800, 819, and 829 devices allows remote attackers to cause a denial of service (memory consumption) via crafted TCP packets on the SSH port, aka Bug ID CSCuu13476. | |||||
| CVE-2008-4128 | 1 Cisco | 2 871 Integrated Services Router, Ios | 2023-05-22 | 9.3 HIGH | N/A |
| Multiple cross-site request forgery (CSRF) vulnerabilities in the HTTP Administration component in Cisco IOS 12.4 on the 871 Integrated Services Router allow remote attackers to execute arbitrary commands via (1) a certain "show privilege" command to the /level/15/exec/- URI, and (2) a certain "alias exec" command to the /level/15/exec/-/configure/http URI. NOTE: some of these details are obtained from third party information. | |||||
| CVE-2022-20717 | 2 Cisco, Citrix | 9 1100 Integrated Services Router, Sd-wan Vedge Router, Sd-wan 1000 and 6 more | 2023-05-22 | 4.9 MEDIUM | 5.5 MEDIUM |
| A vulnerability in the NETCONF process of Cisco SD-WAN vEdge Routers could allow an authenticated, local attacker to cause an affected device to run out of memory, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient memory management when an affected device receives large amounts of traffic. An attacker could exploit this vulnerability by sending malicious traffic to an affected device. A successful exploit could allow the attacker to cause the device to crash, resulting in a DoS condition. | |||||
| CVE-2007-2586 | 1 Cisco | 1 Ios | 2023-05-09 | 9.3 HIGH | N/A |
| The FTP Server in Cisco IOS 11.3 through 12.4 does not properly check user authorization, which allows remote attackers to execute arbitrary code, and have other impact including reading startup-config, as demonstrated by a crafted MKD command that involves access to a VTY device and overflows a buffer, aka bug ID CSCek55259. | |||||
| CVE-2018-0417 | 1 Cisco | 2 Wireless Lan Controller, Wireless Lan Controller Software | 2023-04-26 | 4.6 MEDIUM | 7.8 HIGH |
| A vulnerability in TACACS authentication with Cisco Wireless LAN Controller (WLC) Software could allow an authenticated, local attacker to perform certain operations within the GUI that are not normally available to that user on the CLI. The vulnerability is due to incorrect parsing of a specific TACACS attribute received in the TACACS response from the remote TACACS server. An attacker could exploit this vulnerability by authenticating via TACACS to the GUI on the affected device. A successful exploit could allow an attacker to create local user accounts with administrative privileges on an affected WLC and execute other commands that are not allowed from the CLI and should be prohibited. | |||||
| CVE-2018-0395 | 1 Cisco | 12 Firepower 9300, Firepower Extensible Operating System, Nexus 7000 10-slot and 9 more | 2023-04-20 | 2.9 LOW | 5.3 MEDIUM |
| A vulnerability in the Link Layer Discovery Protocol (LLDP) implementation for Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition when the device unexpectedly reloads. The vulnerability is due to improper input validation of certain type, length, value (TLV) fields of the LLDP frame header. An attacker could exploit this vulnerability by sending a crafted LLDP packet to an interface on the targeted device. A successful exploit could allow the attacker to cause the switch to reload unexpectedly. | |||||
| CVE-2020-3172 | 1 Cisco | 107 Firepower 4110, Firepower 4115, Firepower 4120 and 104 more | 2023-04-20 | 8.3 HIGH | 8.8 HIGH |
| A vulnerability in the Cisco Discovery Protocol feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on an affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2-adjacent affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code as root or cause a DoS condition on the affected device. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Note: This vulnerability is different from the following Cisco FXOS and NX-OS Software Cisco Discovery Protocol vulnerabilities that Cisco announced on Feb. 5, 2020: Cisco FXOS, IOS XR, and NX-OS Software Cisco Discovery Protocol Denial of Service Vulnerability and Cisco NX-OS Software Cisco Discovery Protocol Remote Code Execution Vulnerability. | |||||
| CVE-2020-3517 | 1 Cisco | 98 Firepower 4110, Firepower 4112, Firepower 4115 and 95 more | 2023-04-20 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated attacker to cause process crashes, which could result in a denial of service (DoS) condition on an affected device. The attack vector is configuration dependent and could be remote or adjacent. For more information about the attack vector, see the Details section of this advisory. The vulnerability is due to insufficient error handling when the affected software parses Cisco Fabric Services messages. An attacker could exploit this vulnerability by sending malicious Cisco Fabric Services messages to an affected device. A successful exploit could allow the attacker to cause a reload of an affected device, which could result in a DoS condition. | |||||
| CVE-2019-1734 | 1 Cisco | 94 Firepower 4110, Firepower 4112, Firepower 4115 and 91 more | 2023-04-20 | 2.1 LOW | 5.5 MEDIUM |
| A vulnerability in the implementation of a CLI diagnostic command in Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to view sensitive system files that should be restricted. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to incomplete role-based access control (RBAC) verification. An attacker could exploit this vulnerability by authenticating to the device and issuing a specific CLI diagnostic command with crafted user-input parameters. An exploit could allow the attacker to perform an arbitrary read of a file on the device, and the file may contain sensitive information. The attacker needs valid device credentials to exploit this vulnerability. | |||||
| CVE-2019-1597 | 1 Cisco | 12 Firepower 4100, Firepower 9300, Firepower Extensible Operating System and 9 more | 2023-04-20 | 7.8 HIGH | 7.5 HIGH |
| Multiple vulnerabilities in the implementation of the Lightweight Directory Access Protocol (LDAP) feature in Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of LDAP packets by an affected device. An attacker could exploit these vulnerabilities by sending an LDAP packet crafted using Basic Encoding Rules (BER) to an affected device. The LDAP packet must have a source IP address of an LDAP server configured on the targeted device. A successful exploit could cause the affected device to reload, resulting in a DoS condition. Firepower 4100 Series Next-Generation Firewalls are affected in versions prior to 2.0.1.201, 2.2.2.54, and 2.3.1.75. Firepower 9300 Security Appliances are affected in versions prior to 2.0.1.201, 2.2.2.54 and 2.3.1.75. MDS 9000 Series Multilayer Switches are affected in versions prior to 8.2(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(1). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(2). Nexus 7000 and 7700 Series Switches are affected in versions prior to 8.2(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(1). Cisco UCS 6200 and 6300 Fabric Interconnect devices are affected in versions prior to 3.2(2b). | |||||
| CVE-2018-0311 | 1 Cisco | 84 Firepower 4110, Firepower 4120, Firepower 4140 and 81 more | 2023-04-20 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packets when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could cause process crashes and result in a DoS condition on the device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69960, CSCve02463, CSCve04859, CSCve41530, CSCve41537, CSCve41541, CSCve41557. | |||||