Total
31934 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2023-36201 | 1 Jerryscript | 1 Jerryscript | 2024-11-13 | N/A | 7.5 HIGH |
| An issue in JerryscriptProject jerryscript v.3.0.0 allows an attacker to obtain sensitive information via a crafted script to the arrays. | |||||
| CVE-2023-34197 | 1 Zohocorp | 3 Manageengine Servicedesk Plus, Manageengine Servicedesk Plus Msp, Manageengine Supportcenter Plus | 2024-11-13 | N/A | 5.4 MEDIUM |
| Zoho ManageEngine ServiceDesk Plus before 14202, ServiceDesk Plus MSP before 14300, and SupportCenter Plus before 14300 have a privilege escalation vulnerability in the Release module that allows unprivileged users to access the Reminders of a release ticket and make modifications. | |||||
| CVE-2024-49774 | 1 Salesagility | 1 Suitecrm | 2024-11-13 | N/A | 7.2 HIGH |
| SuiteCRM is an open-source, enterprise-ready Customer Relationship Management (CRM) software application. SuiteCRM relies on the blacklist of functions/methods to prevent installation of malicious MLPs. But this checks can be bypassed with some syntax constructions. SuiteCRM uses token_get_all to parse PHP scripts and check the resulted AST against blacklists. But it doesn't take into account all scenarios. This issue has been addressed in versions 7.14.6 and 8.7.1. Users are advised to upgrade. There are no known workarounds for this vulnerability. | |||||
| CVE-2024-24409 | 1 Zohocorp | 1 Manageengine Admanager Plus | 2024-11-13 | N/A | 8.8 HIGH |
| Zohocorp ManageEngine ADManager Plus versions 7203 and prior are vulnerable to Privilege Escalation in the Modify Computers option. | |||||
| CVE-2024-50333 | 1 Salesagility | 1 Suitecrm | 2024-11-13 | N/A | 8.8 HIGH |
| SuiteCRM is an open-source, enterprise-ready Customer Relationship Management (CRM) software application. User input is not validated and is written to the filesystem. The ParserLabel::addLabels() function can be used to write attacker-controlled data into the custom language file that will be included at the runtime. This issue has been addressed in versions 7.14.6 and 8.7.1. Users are advised to upgrade. There are no known workarounds for this vulnerability. | |||||
| CVE-2024-50558 | 1 Siemens | 52 Ruggedcom Rm1224 Lte\(4g\) Eu, Ruggedcom Rm1224 Lte\(4g\) Eu Firmware, Ruggedcom Rm1224 Lte\(4g\) Nam and 49 more | 2024-11-13 | N/A | 4.3 MEDIUM |
| A vulnerability has been identified in RUGGEDCOM RM1224 LTE(4G) EU (6GK6108-4AM00-2BA2) (All versions < V8.2), RUGGEDCOM RM1224 LTE(4G) NAM (6GK6108-4AM00-2DA2) (All versions < V8.2), SCALANCE M804PB (6GK5804-0AP00-2AA2) (All versions < V8.2), SCALANCE M812-1 ADSL-Router (6GK5812-1AA00-2AA2) (All versions < V8.2), SCALANCE M812-1 ADSL-Router (6GK5812-1BA00-2AA2) (All versions < V8.2), SCALANCE M816-1 ADSL-Router (6GK5816-1AA00-2AA2) (All versions < V8.2), SCALANCE M816-1 ADSL-Router (6GK5816-1BA00-2AA2) (All versions < V8.2), SCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2) (All versions < V8.2), SCALANCE M874-2 (6GK5874-2AA00-2AA2) (All versions < V8.2), SCALANCE M874-3 (6GK5874-3AA00-2AA2) (All versions < V8.2), SCALANCE M874-3 3G-Router (CN) (6GK5874-3AA00-2FA2) (All versions < V8.2), SCALANCE M876-3 (6GK5876-3AA02-2BA2) (All versions < V8.2), SCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2) (All versions < V8.2), SCALANCE M876-4 (6GK5876-4AA10-2BA2) (All versions < V8.2), SCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2) (All versions < V8.2), SCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2) (All versions < V8.2), SCALANCE MUM853-1 (A1) (6GK5853-2EA10-2AA1) (All versions < V8.2), SCALANCE MUM853-1 (B1) (6GK5853-2EA10-2BA1) (All versions < V8.2), SCALANCE MUM853-1 (EU) (6GK5853-2EA00-2DA1) (All versions < V8.2), SCALANCE MUM856-1 (A1) (6GK5856-2EA10-3AA1) (All versions < V8.2), SCALANCE MUM856-1 (B1) (6GK5856-2EA10-3BA1) (All versions < V8.2), SCALANCE MUM856-1 (CN) (6GK5856-2EA00-3FA1) (All versions < V8.2), SCALANCE MUM856-1 (EU) (6GK5856-2EA00-3DA1) (All versions < V8.2), SCALANCE MUM856-1 (RoW) (6GK5856-2EA00-3AA1) (All versions < V8.2), SCALANCE S615 EEC LAN-Router (6GK5615-0AA01-2AA2) (All versions < V8.2), SCALANCE S615 LAN-Router (6GK5615-0AA00-2AA2) (All versions < V8.2). Affected devices improperly manage access control for read-only users. This could allow an attacker to cause a temporary denial of service condition. | |||||
| CVE-2024-50557 | 1 Siemens | 52 Ruggedcom Rm1224 Lte\(4g\) Eu, Ruggedcom Rm1224 Lte\(4g\) Eu Firmware, Ruggedcom Rm1224 Lte\(4g\) Nam and 49 more | 2024-11-13 | N/A | 9.8 CRITICAL |
| A vulnerability has been identified in RUGGEDCOM RM1224 LTE(4G) EU (6GK6108-4AM00-2BA2) (All versions < V8.2), RUGGEDCOM RM1224 LTE(4G) NAM (6GK6108-4AM00-2DA2) (All versions < V8.2), SCALANCE M804PB (6GK5804-0AP00-2AA2) (All versions < V8.2), SCALANCE M812-1 ADSL-Router (6GK5812-1AA00-2AA2) (All versions < V8.2), SCALANCE M812-1 ADSL-Router (6GK5812-1BA00-2AA2) (All versions < V8.2), SCALANCE M816-1 ADSL-Router (6GK5816-1AA00-2AA2) (All versions < V8.2), SCALANCE M816-1 ADSL-Router (6GK5816-1BA00-2AA2) (All versions < V8.2), SCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2) (All versions < V8.2), SCALANCE M874-2 (6GK5874-2AA00-2AA2) (All versions < V8.2), SCALANCE M874-3 (6GK5874-3AA00-2AA2) (All versions < V8.2), SCALANCE M874-3 3G-Router (CN) (6GK5874-3AA00-2FA2) (All versions < V8.2), SCALANCE M876-3 (6GK5876-3AA02-2BA2) (All versions < V8.2), SCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2) (All versions < V8.2), SCALANCE M876-4 (6GK5876-4AA10-2BA2) (All versions < V8.2), SCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2) (All versions < V8.2), SCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2) (All versions < V8.2), SCALANCE MUM853-1 (A1) (6GK5853-2EA10-2AA1) (All versions < V8.2), SCALANCE MUM853-1 (B1) (6GK5853-2EA10-2BA1) (All versions < V8.2), SCALANCE MUM853-1 (EU) (6GK5853-2EA00-2DA1) (All versions < V8.2), SCALANCE MUM856-1 (A1) (6GK5856-2EA10-3AA1) (All versions < V8.2), SCALANCE MUM856-1 (B1) (6GK5856-2EA10-3BA1) (All versions < V8.2), SCALANCE MUM856-1 (CN) (6GK5856-2EA00-3FA1) (All versions < V8.2), SCALANCE MUM856-1 (EU) (6GK5856-2EA00-3DA1) (All versions < V8.2), SCALANCE MUM856-1 (RoW) (6GK5856-2EA00-3AA1) (All versions < V8.2), SCALANCE S615 EEC LAN-Router (6GK5615-0AA01-2AA2) (All versions < V8.2), SCALANCE S615 LAN-Router (6GK5615-0AA00-2AA2) (All versions < V8.2). Affected devices do not properly validate input in configuration fields of the iperf functionality. This could allow an unauthenticated remote attacker to execute arbitrary code on the device. | |||||
| CVE-2024-50222 | 1 Linux | 1 Linux Kernel | 2024-11-13 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: iov_iter: fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP generic/077 on x86_32 CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y with highmem, on huge=always tmpfs, issues a warning and then hangs (interruptibly): WARNING: CPU: 5 PID: 3517 at mm/highmem.c:622 kunmap_local_indexed+0x62/0xc9 CPU: 5 UID: 0 PID: 3517 Comm: cp Not tainted 6.12.0-rc4 #2 ... copy_page_from_iter_atomic+0xa6/0x5ec generic_perform_write+0xf6/0x1b4 shmem_file_write_iter+0x54/0x67 Fix copy_page_from_iter_atomic() by limiting it in that case (include/linux/skbuff.h skb_frag_must_loop() does similar). But going forward, perhaps CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is too surprising, has outlived its usefulness, and should just be removed? | |||||
| CVE-2024-33626 | 1 Level1 | 2 Wbr-6012, Wbr-6012 Firmware | 2024-11-13 | N/A | 5.3 MEDIUM |
| The LevelOne WBR-6012 router contains a vulnerability within its web application that allows unauthenticated disclosure of sensitive information, such as the WiFi WPS PIN, through a hidden page accessible by an HTTP request. Disclosure of this information could enable attackers to connect to the device's WiFi network. | |||||
| CVE-2024-33603 | 1 Level1 | 2 Wbr-6012, Wbr-6012 Firmware | 2024-11-13 | N/A | 5.3 MEDIUM |
| The LevelOne WBR-6012 router has an information disclosure vulnerability in its web application, which allows unauthenticated users to access a verbose system log page and obtain sensitive data, such as memory addresses and IP addresses for login attempts. This flaw could lead to session hijacking due to the device's reliance on IP address for authentication. | |||||
| CVE-2024-50245 | 1 Linux | 1 Linux Kernel | 2024-11-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix possible deadlock in mi_read Mutex lock with another subclass used in ni_lock_dir(). | |||||
| CVE-2024-50244 | 1 Linux | 1 Linux Kernel | 2024-11-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Additional check in ni_clear() Checking of NTFS_FLAGS_LOG_REPLAYING added to prevent access to uninitialized bitmap during replay process. | |||||
| CVE-2024-49937 | 1 Linux | 1 Linux Kernel | 2024-11-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Set correct chandef when starting CAC When starting CAC in a mode other than AP mode, it return a "WARNING: CPU: 0 PID: 63 at cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]" caused by the chandef.chan being null at the end of CAC. Solution: Ensure the channel definition is set for the different modes when starting CAC to avoid getting a NULL 'chan' at the end of CAC. Call Trace: ? show_regs.part.0+0x14/0x16 ? __warn+0x67/0xc0 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? report_bug+0xa7/0x130 ? exc_overflow+0x30/0x30 ? handle_bug+0x27/0x50 ? exc_invalid_op+0x18/0x60 ? handle_exception+0xf6/0xf6 ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211] ? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211] ? process_one_work+0x165/0x280 ? worker_thread+0x120/0x3f0 ? kthread+0xc2/0xf0 ? process_one_work+0x280/0x280 ? kthread_complete_and_exit+0x20/0x20 ? ret_from_fork+0x19/0x24 [shorten subject, remove OCB, reorder cases to match previous list] | |||||
| CVE-2024-50353 | 1 Iowacomputergurus | 1 Aspnetcore.utilities.cloudstorage | 2024-11-13 | N/A | 5.3 MEDIUM |
| ICG.AspNetCore.Utilities.CloudStorage is a collection of cloud storage utilities to assist with the management of files for cloud upload. Users of this library that set a duration for a SAS Uri with a value other than 1 hour may have generated a URL with a duration that is longer, or shorter than desired. Users not implemented SAS Uri's are unaffected. This issue was resolved in version 8.0.0 of the library. | |||||
| CVE-2024-49933 | 1 Linux | 1 Linux Kernel | 2024-11-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: blk_iocost: fix more out of bound shifts Recently running UBSAN caught few out of bound shifts in the ioc_forgive_debts() function: UBSAN: shift-out-of-bounds in block/blk-iocost.c:2142:38 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... UBSAN: shift-out-of-bounds in block/blk-iocost.c:2144:30 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... Call Trace: <IRQ> dump_stack_lvl+0xca/0x130 __ubsan_handle_shift_out_of_bounds+0x22c/0x280 ? __lock_acquire+0x6441/0x7c10 ioc_timer_fn+0x6cec/0x7750 ? blk_iocost_init+0x720/0x720 ? call_timer_fn+0x5d/0x470 call_timer_fn+0xfa/0x470 ? blk_iocost_init+0x720/0x720 __run_timer_base+0x519/0x700 ... Actual impact of this issue was not identified but I propose to fix the undefined behaviour. The proposed fix to prevent those out of bound shifts consist of precalculating exponent before using it the shift operations by taking min value from the actual exponent and maximum possible number of bits. | |||||
| CVE-2024-49927 | 1 Linux | 1 Linux Kernel | 2024-11-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: x86/ioapic: Handle allocation failures gracefully Breno observed panics when using failslab under certain conditions during runtime: can not alloc irq_pin_list (-1,0,20) Kernel panic - not syncing: IO-APIC: failed to add irq-pin. Can not proceed panic+0x4e9/0x590 mp_irqdomain_alloc+0x9ab/0xa80 irq_domain_alloc_irqs_locked+0x25d/0x8d0 __irq_domain_alloc_irqs+0x80/0x110 mp_map_pin_to_irq+0x645/0x890 acpi_register_gsi_ioapic+0xe6/0x150 hpet_open+0x313/0x480 That's a pointless panic which is a leftover of the historic IO/APIC code which panic'ed during early boot when the interrupt allocation failed. The only place which might justify panic is the PIT/HPET timer_check() code which tries to figure out whether the timer interrupt is delivered through the IO/APIC. But that code does not require to handle interrupt allocation failures. If the interrupt cannot be allocated then timer delivery fails and it either panics due to that or falls back to legacy mode. Cure this by removing the panic wrapper around __add_pin_to_irq_node() and making mp_irqdomain_alloc() aware of the failure condition and handle it as any other failure in this function gracefully. | |||||
| CVE-2024-49887 | 1 Linux | 1 Linux Kernel | 2024-11-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to don't panic system for no free segment fault injection f2fs: fix to don't panic system for no free segment fault injection syzbot reports a f2fs bug as below: F2FS-fs (loop0): inject no free segment in get_new_segment of __allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3167 F2FS-fs (loop0): Stopped filesystem due to reason: 7 ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:2748! CPU: 0 UID: 0 PID: 5109 Comm: syz-executor304 Not tainted 6.11.0-rc6-syzkaller-00363-g89f5e14d05b4 #0 RIP: 0010:get_new_segment fs/f2fs/segment.c:2748 [inline] RIP: 0010:new_curseg+0x1f61/0x1f70 fs/f2fs/segment.c:2836 Call Trace: __allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3167 f2fs_allocate_new_section fs/f2fs/segment.c:3181 [inline] f2fs_allocate_pinning_section+0xfa/0x4e0 fs/f2fs/segment.c:3195 f2fs_expand_inode_data+0x5d6/0xbb0 fs/f2fs/file.c:1799 f2fs_fallocate+0x448/0x960 fs/f2fs/file.c:1903 vfs_fallocate+0x553/0x6c0 fs/open.c:334 do_vfs_ioctl+0x2592/0x2e50 fs/ioctl.c:886 __do_sys_ioctl fs/ioctl.c:905 [inline] __se_sys_ioctl+0x81/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0010:get_new_segment fs/f2fs/segment.c:2748 [inline] RIP: 0010:new_curseg+0x1f61/0x1f70 fs/f2fs/segment.c:2836 The root cause is when we inject no free segment fault into f2fs, we should not panic system, fix it. | |||||
| CVE-2024-6868 | 1 Mudler | 1 Localai | 2024-11-13 | N/A | 9.8 CRITICAL |
| mudler/LocalAI version 2.17.1 allows for arbitrary file write due to improper handling of automatic archive extraction. When model configurations specify additional files as archives (e.g., .tar), these archives are automatically extracted after downloading. This behavior can be exploited to perform a 'tarslip' attack, allowing files to be written to arbitrary locations on the server, bypassing checks that normally restrict files to the models directory. This vulnerability can lead to remote code execution (RCE) by overwriting backend assets used by the server. | |||||
| CVE-2024-49886 | 1 Linux | 1 Linux Kernel | 2024-11-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds". kasan report: [ 19.411889] ================================================================== [ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113 [ 19.417368] [ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10 [ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022 [ 19.422687] Call Trace: [ 19.424091] <TASK> [ 19.425448] dump_stack_lvl+0x5d/0x80 [ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.428694] print_report+0x19d/0x52e [ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.433539] kasan_report+0xf0/0x170 [ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10 [ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common] [ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common] [ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360 [ 19.444797] cpuhp_invoke_callback+0x221/0xec0 [ 19.446337] cpuhp_thread_fun+0x21b/0x610 [ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10 [ 19.449354] smpboot_thread_fn+0x2e7/0x6e0 [ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 19.452405] kthread+0x29c/0x350 [ 19.453817] ? __pfx_kthread+0x10/0x10 [ 19.455253] ret_from_fork+0x31/0x70 [ 19.456685] ? __pfx_kthread+0x10/0x10 [ 19.458114] ret_from_fork_asm+0x1a/0x30 [ 19.459573] </TASK> [ 19.460853] [ 19.462055] Allocated by task 1198: [ 19.463410] kasan_save_stack+0x30/0x50 [ 19.464788] kasan_save_track+0x14/0x30 [ 19.466139] __kasan_kmalloc+0xaa/0xb0 [ 19.467465] __kmalloc+0x1cd/0x470 [ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common] [ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr] [ 19.471670] do_one_initcall+0xa4/0x380 [ 19.472903] do_init_module+0x238/0x760 [ 19.474105] load_module+0x5239/0x6f00 [ 19.475285] init_module_from_file+0xd1/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.478920] do_syscall_64+0x82/0x160 [ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 19.481292] [ 19.482205] The buggy address belongs to the object at ffff888829e65000 which belongs to the cache kmalloc-512 of size 512 [ 19.484818] The buggy address is located 0 bytes to the right of allocated 512-byte region [ffff888829e65000, ffff888829e65200) [ 19.487447] [ 19.488328] The buggy address belongs to the physical page: [ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60 [ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff) [ 19.493914] page_type: 0xffffffff() [ 19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff [ 19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000 [ 19.503784] page dumped because: k ---truncated--- | |||||
| CVE-2024-49885 | 1 Linux | 1 Linux Kernel | 2024-11-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm, slub: avoid zeroing kmalloc redzone Since commit 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated kmalloc space than requested"), setting orig_size treats the wasted space (object_size - orig_size) as a redzone. However with init_on_free=1 we clear the full object->size, including the redzone. Additionally we clear the object metadata, including the stored orig_size, making it zero, which makes check_object() treat the whole object as a redzone. These issues lead to the following BUG report with "slub_debug=FUZ init_on_free=1": [ 0.000000] ============================================================================= [ 0.000000] BUG kmalloc-8 (Not tainted): kmalloc Redzone overwritten [ 0.000000] ----------------------------------------------------------------------------- [ 0.000000] [ 0.000000] 0xffff000010032858-0xffff00001003285f @offset=2136. First byte 0x0 instead of 0xcc [ 0.000000] FIX kmalloc-8: Restoring kmalloc Redzone 0xffff000010032858-0xffff00001003285f=0xcc [ 0.000000] Slab 0xfffffdffc0400c80 objects=36 used=23 fp=0xffff000010032a18 flags=0x3fffe0000000200(workingset|node=0|zone=0|lastcpupid=0x1ffff) [ 0.000000] Object 0xffff000010032858 @offset=2136 fp=0xffff0000100328c8 [ 0.000000] [ 0.000000] Redzone ffff000010032850: cc cc cc cc cc cc cc cc ........ [ 0.000000] Object ffff000010032858: cc cc cc cc cc cc cc cc ........ [ 0.000000] Redzone ffff000010032860: cc cc cc cc cc cc cc cc ........ [ 0.000000] Padding ffff0000100328b4: 00 00 00 00 00 00 00 00 00 00 00 00 ............ [ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.11.0-rc3-next-20240814-00004-g61844c55c3f4 #144 [ 0.000000] Hardware name: NXP i.MX95 19X19 board (DT) [ 0.000000] Call trace: [ 0.000000] dump_backtrace+0x90/0xe8 [ 0.000000] show_stack+0x18/0x24 [ 0.000000] dump_stack_lvl+0x74/0x8c [ 0.000000] dump_stack+0x18/0x24 [ 0.000000] print_trailer+0x150/0x218 [ 0.000000] check_object+0xe4/0x454 [ 0.000000] free_to_partial_list+0x2f8/0x5ec To address the issue, use orig_size to clear the used area. And restore the value of orig_size after clear the remaining area. When CONFIG_SLUB_DEBUG not defined, (get_orig_size()' directly returns s->object_size. So when using memset to init the area, the size can simply be orig_size, as orig_size returns object_size when CONFIG_SLUB_DEBUG not enabled. And orig_size can never be bigger than object_size. | |||||