Total
4572 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2018-6000 | 1 Asus | 1 Asuswrt | 2019-10-03 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered in AsusWRT before 3.0.0.4.384_10007. The do_vpnupload_post function in router/httpd/web.c in vpnupload.cgi provides functionality for setting NVRAM configuration values, which allows attackers to set the admin password and launch an SSH daemon (or enable infosvr command mode), and consequently obtain remote administrative access, via a crafted request. This is available to unauthenticated attackers in conjunction with CVE-2018-5999. | |||||
| CVE-2018-20155 | 1 Designmodo | 1 Wp Maintenance Mode | 2019-10-03 | 4.0 MEDIUM | 4.3 MEDIUM |
| The WP Maintenance Mode plugin before 2.0.7 for WordPress allows remote authenticated subscriber users to bypass intended access restrictions on changes to plugin settings. | |||||
| CVE-2018-15005 | 1 Zteusa | 2 Zte Zmax Champ, Zte Zmax Champ Firmware | 2019-10-03 | 5.6 MEDIUM | 7.1 HIGH |
| The ZTE ZMAX Champ Android device with a build fingerprint of ZTE/Z917VL/fortune:6.0.1/MMB29M/20170327.120922:user/release-keys contains a pre-installed platform app with a package name of com.zte.zdm.sdm (versionCode=31, versionName=V5.0.3) that contains an exported broadcast receiver app component named com.zte.zdm.VdmcBroadcastReceiver that allows any app co-located on the device to programmatically initiate a factory reset. In addition, the app initiating the factory reset does not require any permissions. A factory reset will remove all user data and apps from the device. This will result in the loss of any data that have not been backed up or synced externally. The capability to perform a factory reset is not directly available to third-party apps (those that the user installs themselves with the exception of enabled Mobile Device Management (MDM) apps), although this capability can be obtained by leveraging an unprotected app component of a pre-installed platform app. | |||||
| CVE-2017-11135 | 1 Stashcat | 1 Heinekingmedia | 2019-10-03 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered in heinekingmedia StashCat through 1.7.5 for Android, through 0.0.80w for Web, and through 0.0.86 for Desktop. The logout mechanism does not check for authorization. Therefore, an attacker only needs to know the device ID. This causes a denial of service. This might be interpreted as a vulnerability in customer-controlled software, in the sense that the StashCat client side has no secure way to signal that it is ending a session and that data should be deleted. | |||||
| CVE-2018-2381 | 1 Sap | 1 Erp Financials Information System | 2019-10-03 | 6.5 MEDIUM | 8.8 HIGH |
| SAP ERP Financials Information System (SAP_APPL 6.00, 6.02, 6.03, 6.04, 6.05, 6.06, 6.16; SAP_FIN 6.17, 6.18, 7.00, 7.20, 7.30 S4CORE 1.00, 1.01, 1.02) does not perform necessary authorization checks for an authenticated user, resulting in escalation of privileges. | |||||
| CVE-2018-15329 | 1 F5 | 14 Big-ip Access Policy Manager, Big-ip Advanced Firewall Manager, Big-ip Analytics and 11 more | 2019-10-03 | 6.5 MEDIUM | 7.2 HIGH |
| On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.1, or 12.1.0-12.1.3.7, or Enterprise Manager 3.1.1, when authenticated administrative users run commands in the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, restrictions on allowed commands may not be enforced. | |||||
| CVE-2017-7622 | 1 Deepin | 1 Deepin Desktop Environment | 2019-10-03 | 9.0 HIGH | 8.8 HIGH |
| dde-daemon, the daemon process of DDE (Deepin Desktop Environment) 15.0 through 15.3, runs with root privileges and hardly does anything to identify the user who calls the function through D-Bus. Anybody can change the grub config, even to append some arguments to make a backdoor or privilege escalation, by calling DoWriteGrubSettings() provided by dde-daemon. | |||||
| CVE-2017-4985 | 1 Emc | 4 Vnx1, Vnx1 Firmware, Vnx2 and 1 more | 2019-10-03 | 7.2 HIGH | 7.8 HIGH |
| In EMC VNX2 versions prior to OE for File 8.1.9.211 and VNX1 versions prior to OE for File 7.1.80.8, a local authenticated user may potentially escalate their privileges to root due to authorization checks not being performed on certain perl scripts. This may potentially be exploited by an attacker to run arbitrary commands as root on the targeted VNX Control Station system. | |||||
| CVE-2017-5180 | 1 Firejail Project | 1 Firejail | 2019-10-03 | 4.6 MEDIUM | 8.8 HIGH |
| Firejail before 0.9.44.4 and 0.9.38.x LTS before 0.9.38.8 LTS does not consider the .Xauthority case during its attempt to prevent accessing user files with an euid of zero, which allows local users to conduct sandbox-escape attacks via vectors involving a symlink and the --private option. | |||||
| CVE-2018-10251 | 1 Sierrawireless | 11 Aleos, Es440, Es450 and 8 more | 2019-10-03 | 10.0 HIGH | 9.8 CRITICAL |
| A vulnerability in Sierra Wireless AirLink GX400, GX440, ES440, and LS300 routers with firmware before 4.4.7 and GX450, ES450, RV50, RV50X, MP70, and MP70E routers with firmware before 4.9.3 could allow an unauthenticated remote attacker to execute arbitrary code and gain full control of an affected system, including issuing commands with root privileges. | |||||
| CVE-2018-1000022 | 1 Electrum | 1 Bitcoin Wallet | 2019-10-03 | 2.6 LOW | 5.3 MEDIUM |
| Electrum Technologies GmbH Electrum Bitcoin Wallet version prior to version 3.0.5 contains a Missing Authorization vulnerability in JSONRPC interface that can result in Bitcoin theft, if the user's wallet is not password protected. This attack appear to be exploitable via The victim must visit a web page with specially crafted javascript. This vulnerability appears to have been fixed in 3.0.5. | |||||
| CVE-2017-1000056 | 1 Kubernetes | 1 Kubernetes | 2019-10-03 | 7.5 HIGH | 9.8 CRITICAL |
| Kubernetes version 1.5.0-1.5.4 is vulnerable to a privilege escalation in the PodSecurityPolicy admission plugin resulting in the ability to make use of any existing PodSecurityPolicy object. | |||||
| CVE-2018-0015 | 1 Juniper | 1 Appformix | 2019-10-03 | 8.5 HIGH | 7.5 HIGH |
| A malicious user with unrestricted access to the AppFormix application management platform may be able to access a Python debug console and execute system commands with root privilege. The AppFormix Agent exposes the debug console on a host where AppFormix Agent is executing. If the host is executing AppFormix Agent, an attacker may access the debug console and execute Python commands with root privilege. Affected AppFormix releases are: All versions up to and including 2.7.3; 2.11 versions prior to 2.11.3; 2.15 versions prior to 2.15.2. Juniper SIRT is not aware of any malicious exploitation of this vulnerability, however, the issue has been seen in a production network. No other Juniper Networks products or platforms are affected by this issue. | |||||
| CVE-2017-1002007 | 1 Dtracker Project | 1 Dtracker | 2019-10-03 | 5.0 MEDIUM | 7.5 HIGH |
| Vulnerability in wordpress plugin DTracker v1.5, The code dtracker/save_mail.php doesn't check that the user is authorized before injecting new contacts into the wp_contact table. | |||||
| CVE-2017-6251 | 2 Microsoft, Nvidia | 2 Windows, Gpu Driver | 2019-10-03 | 7.2 HIGH | 7.8 HIGH |
| NVIDIA Windows GPU Display Driver contains a vulnerability in the kernel mode layer handler where a missing permissions check may allow users to gain access to arbitrary physical system memory, which may lead to an escalation of privileges. | |||||
| CVE-2017-17707 | 1 Pleasantsolutions | 1 Pleasant Password Server | 2019-10-03 | 6.5 MEDIUM | 8.1 HIGH |
| Due to missing authorization checks, any authenticated user is able to list, upload, or delete attachments to password safe entries in Pleasant Password Server before 7.8.3. To perform those actions on an entry, the user needs to know the corresponding "CredentialId" value, which uniquely identifies a password safe entry. Since "CredentialId" values are implemented as GUIDs, they are hard to guess. However, if for example an entry's owner grants read-only access to a malicious user, the value gets exposed to the malicious user. The same holds true for temporary grants. | |||||
| CVE-2018-15327 | 1 F5 | 14 Big-ip Access Policy Manager, Big-ip Advanced Firewall Manager, Big-ip Analytics and 11 more | 2019-10-03 | 6.5 MEDIUM | 7.2 HIGH |
| In BIG-IP 14.0.0-14.0.0.2 or 13.0.0-13.1.1.1 or Enterprise Manager 3.1.1, when authenticated administrative users run commands in the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, restrictions on allowed commands may not be enforced. | |||||
| CVE-2017-13247 | 1 Google | 1 Android | 2019-10-03 | 4.6 MEDIUM | 7.8 HIGH |
| In the Pixel 2 bootloader, there is a missing permission check which bypasses carrier bootloader lock. This could lead to local elevation of privileges with user execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: Android kernel. Android ID: A-71486645. | |||||
| CVE-2017-17450 | 1 Linux | 1 Linux Kernel | 2019-10-03 | 4.6 MEDIUM | 7.8 HIGH |
| net/netfilter/xt_osf.c in the Linux kernel through 4.14.4 does not require the CAP_NET_ADMIN capability for add_callback and remove_callback operations, which allows local users to bypass intended access restrictions because the xt_osf_fingers data structure is shared across all net namespaces. | |||||
| CVE-2017-6622 | 1 Cisco | 1 Prime Collaboration Provisioning | 2019-10-03 | 10.0 HIGH | 9.8 CRITICAL |
| A vulnerability in the web interface for Cisco Prime Collaboration Provisioning could allow an unauthenticated, remote attacker to bypass authentication and perform command injection with root privileges. The vulnerability is due to missing security constraints in certain HTTP request methods, which could allow access to files via the web interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the targeted application. This vulnerability affects Cisco Prime Collaboration Provisioning Software Releases prior to 12.1. Cisco Bug IDs: CSCvc98724. | |||||