Total
76 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-45196 | 1 Hyperledger | 1 Fabric | 2025-05-01 | N/A | 7.5 HIGH |
| Hyperledger Fabric 2.3 allows attackers to cause a denial of service (orderer crash) by repeatedly sending a crafted channel tx with the same Channel name. NOTE: the official Fabric with Raft prevents exploitation via a locking mechanism and a check for names that already exist. | |||||
| CVE-2023-1668 | 3 Cloudbase, Debian, Redhat | 7 Open Vswitch, Debian Linux, Enterprise Linux and 4 more | 2025-04-23 | N/A | 8.2 HIGH |
| A flaw was found in openvswitch (OVS). When processing an IP packet with protocol 0, OVS will install the datapath flow without the action modifying the IP header. This issue results (for both kernel and userspace datapath) in installing a datapath flow matching all IP protocols (nw_proto is wildcarded) for this flow, but with an incorrect action, possibly causing incorrect handling of other IP packets with a != 0 IP protocol that matches this dp flow. | |||||
| CVE-2023-20921 | 1 Google | 1 Android | 2025-04-02 | N/A | 7.3 HIGH |
| In onPackageRemoved of AccessibilityManagerService.java, there is a possibility to automatically grant accessibility services due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-10 Android-11 Android-12 Android-12L Android-13Android ID: A-243378132 | |||||
| CVE-2023-20915 | 1 Google | 1 Android | 2025-04-02 | N/A | 7.8 HIGH |
| In addOrReplacePhoneAccount of PhoneAccountRegistrar.java, there is a possible way to enable a phone account without user interaction due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10 Android-11 Android-12 Android-12L Android-13Android ID: A-246930197 | |||||
| CVE-2022-29609 | 1 Opennetworking | 1 Onos | 2025-02-05 | N/A | 5.3 MEDIUM |
| An issue was discovered in ONOS 2.5.1. An intent with the same source and destination shows the INSTALLING state, indicating that its flow rules are installing. Improper handling of such an intent is misleading to a network operator. | |||||
| CVE-2022-29605 | 1 Opennetworking | 1 Onos | 2025-02-05 | N/A | 7.5 HIGH |
| An issue was discovered in ONOS 2.5.1. IntentManager attempts to install the IPv6 flow rules of an intent into an OpenFlow 1.0 switch that does not support IPv6. Improper handling of the difference in capabilities of the intent and switch is misleading to a network operator. | |||||
| CVE-2021-43819 | 1 Stargate-bukkit Project | 1 Stargate-bukkit | 2025-02-05 | N/A | 5.3 MEDIUM |
| Stargate-Bukkit is a mod for the minecraft video game which adds a portal focused environment. In affected versions Minecarts with chests will drop their items when teleporting through a portal; when they reappear, they will still have their items impacting the integrity of the game world. The teleport code has since been rewritten and is available in release `0.11.5.1`. Users are advised to upgrade. There are no known workarounds for this issue. | |||||
| CVE-2022-29607 | 1 Opennetworking | 1 Onos | 2025-02-05 | N/A | 7.5 HIGH |
| An issue was discovered in ONOS 2.5.1. Modification of an existing intent to have the same source and destination shows the INSTALLED state without any flow rule. Improper handling of such an intent is misleading to a network operator. | |||||
| CVE-2025-24800 | 2025-01-28 | N/A | N/A | ||
| Hyperbridge is a hyper-scalable coprocessor for verifiable, cross-chain interoperability. A critical vulnerability was discovered in the ismp-grandpa crate, that allowed a malicious prover easily convince the verifier of the finality of arbitrary headers. This could be used to steal funds or compromise other kinds of cross-chain applications. This vulnerability is fixed in 15.0.1. | |||||
| CVE-2024-3376 | 1 Oretnom23 | 1 Computer Laboratory Management System | 2025-01-17 | N/A | 9.8 CRITICAL |
| A vulnerability classified as critical has been found in SourceCodester Computer Laboratory Management System 1.0. This affects an unknown part of the file config.php. The manipulation of the argument url leads to execution after redirect. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-259497 was assigned to this vulnerability. | |||||
| CVE-2024-8811 | 1 Winzip | 1 Winzip | 2025-01-03 | N/A | 7.8 HIGH |
| WinZip Mark-of-the-Web Bypass Vulnerability. This vulnerability allows remote attackers to bypass the Mark-of-the-Web protection mechanism on affected installations of WinZip. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of archive files. When opening an archive that bears the Mark-of-the-Web, WinZip removes the Mark-of-the-Web from the archive file. Following extraction, the extracted files also lack the Mark-of-the-Web. An attacker can leverage this vulnerability to execute arbitrary code in the context of the current user. Was ZDI-CAN-23983. | |||||
| CVE-2024-47745 | 1 Linux | 1 Linux Kernel | 2024-12-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mm: call the security_mmap_file() LSM hook in remap_file_pages() The remap_file_pages syscall handler calls do_mmap() directly, which doesn't contain the LSM security check. And if the process has called personality(READ_IMPLIES_EXEC) before and remap_file_pages() is called for RW pages, this will actually result in remapping the pages to RWX, bypassing a W^X policy enforced by SELinux. So we should check prot by security_mmap_file LSM hook in the remap_file_pages syscall handler before do_mmap() is called. Otherwise, it potentially permits an attacker to bypass a W^X policy enforced by SELinux. The bypass is similar to CVE-2016-10044, which bypass the same thing via AIO and can be found in [1]. The PoC: $ cat > test.c int main(void) { size_t pagesz = sysconf(_SC_PAGE_SIZE); int mfd = syscall(SYS_memfd_create, "test", 0); const char *buf = mmap(NULL, 4 * pagesz, PROT_READ | PROT_WRITE, MAP_SHARED, mfd, 0); unsigned int old = syscall(SYS_personality, 0xffffffff); syscall(SYS_personality, READ_IMPLIES_EXEC | old); syscall(SYS_remap_file_pages, buf, pagesz, 0, 2, 0); syscall(SYS_personality, old); // show the RWX page exists even if W^X policy is enforced int fd = open("/proc/self/maps", O_RDONLY); unsigned char buf2[1024]; while (1) { int ret = read(fd, buf2, 1024); if (ret <= 0) break; write(1, buf2, ret); } close(fd); } $ gcc test.c -o test $ ./test | grep rwx 7f1836c34000-7f1836c35000 rwxs 00002000 00:01 2050 /memfd:test (deleted) [PM: subject line tweaks] | |||||
| CVE-2024-53134 | 1 Linux | 1 Linux Kernel | 2024-12-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx93-blk-ctrl: correct remove path The check condition should be 'i < bc->onecell_data.num_domains', not 'bc->onecell_data.num_domains' which will make the look never finish and cause kernel panic. Also disable runtime to address "imx93-blk-ctrl 4ac10000.system-controller: Unbalanced pm_runtime_enable!" | |||||
| CVE-2024-32896 | 1 Google | 1 Android | 2024-11-29 | N/A | 7.8 HIGH |
| there is a possible way to bypass due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation. | |||||
| CVE-2021-1236 | 2 Cisco, Snort | 19 1100-4p Integrated Services Router, 1100-8p Integrated Services Router, 1101-4p Integrated Services Router and 16 more | 2024-11-26 | 5.0 MEDIUM | 5.3 MEDIUM |
| Multiple Cisco products are affected by a vulnerability in the Snort application detection engine that could allow an unauthenticated, remote attacker to bypass the configured policies on an affected system. The vulnerability is due to a flaw in the detection algorithm. An attacker could exploit this vulnerability by sending crafted packets that would flow through an affected system. A successful exploit could allow the attacker to bypass the configured policies and deliver a malicious payload to the protected network. | |||||
| CVE-2024-25622 | 1 Dena | 1 H2o | 2024-11-12 | N/A | 4.3 MEDIUM |
| h2o is an HTTP server with support for HTTP/1.x, HTTP/2 and HTTP/3. The configuration directives provided by the headers handler allows users to modify the response headers being sent by h2o. The configuration file of h2o has scopes, and the inner scopes (e.g., path level) are expected to inherit the configuration defined in outer scopes (e.g., global level). However, if a header directive is used in the inner scope, all the definition in outer scopes are ignored. This can lead to headers not being modified as expected. Depending on the headers being added or removed unexpectedly, this behavior could lead to unexpected client behavior. This vulnerability is fixed in commit 123f5e2b65dcdba8f7ef659a00d24bd1249141be. | |||||
| CVE-2024-47168 | 1 Gradio Project | 1 Gradio | 2024-10-17 | N/A | 4.3 MEDIUM |
| Gradio is an open-source Python package designed for quick prototyping. This vulnerability involves data exposure due to the enable_monitoring flag not properly disabling monitoring when set to False. Even when monitoring is supposedly disabled, an attacker or unauthorized user can still access the monitoring dashboard by directly requesting the /monitoring endpoint. This means that sensitive application analytics may still be exposed, particularly in environments where monitoring is expected to be disabled. Users who set enable_monitoring=False to prevent unauthorized access to monitoring data are impacted. Users are advised to upgrade to gradio>=4.44 to address this issue. There are no known workarounds for this vulnerability. | |||||
| CVE-2024-37153 | 1 Evmos | 1 Evmos | 2024-10-15 | N/A | 7.5 HIGH |
| Evmos is the Ethereum Virtual Machine (EVM) Hub on the Cosmos Network. There is an issue with how to liquid stake using Safe which itself is a contract. The bug only appears when there is a local state change together with an ICS20 transfer in the same function and uses the contract's balance, that is using the contract address as the sender parameter in an ICS20 transfer using the ICS20 precompile. This is in essence the "infinite money glitch" allowing contracts to double the supply of Evmos after each transaction.The issue has been patched in versions >=V18.1.0. | |||||
| CVE-2024-38365 | 2024-10-15 | N/A | N/A | ||
| btcd is an alternative full node bitcoin implementation written in Go (golang). The btcd Bitcoin client (versions 0.10 to 0.24) did not correctly re-implement Bitcoin Core's "FindAndDelete()" functionality. This logic is consensus-critical: the difference in behavior with the other Bitcoin clients can lead to btcd clients accepting an invalid Bitcoin block (or rejecting a valid one). This consensus failure can be leveraged to cause a chain split (accepting an invalid Bitcoin block) or be exploited to DoS the btcd nodes (rejecting a valid Bitcoin block). An attacker can create a standard transaction where FindAndDelete doesn't return a match but removeOpCodeByData does making btcd get a different sighash, leading to a chain split. Importantly, this vulnerability can be exploited remotely by any Bitcoin user and does not require any hash power. This is because the difference in behavior can be triggered by a "standard" Bitcoin transaction, that is a transaction which gets relayed through the P2P network before it gets included in a Bitcoin block. `removeOpcodeByData(script []byte, dataToRemove []byte)` removes any data pushes from `script` that contain `dataToRemove`. However, `FindAndDelete` only removes exact matches. So for example, with `script = "<data> <data||foo>"` and `dataToRemove = "data"` btcd will remove both data pushes but Bitcoin Core's `FindAndDelete` only removes the first `<data>` push. This has been patched in btcd version v0.24.2. Users are advised to upgrade. There are no known workarounds for this issue. | |||||
| CVE-2024-47763 | 2024-10-10 | N/A | N/A | ||
| Wasmtime is an open source runtime for WebAssembly. Wasmtime's implementation of WebAssembly tail calls combined with stack traces can result in a runtime crash in certain WebAssembly modules. The runtime crash may be undefined behavior if Wasmtime was compiled with Rust 1.80 or prior. The runtime crash is a deterministic process abort when Wasmtime is compiled with Rust 1.81 and later. WebAssembly tail calls are a proposal which relatively recently reached stage 4 in the standardization process. Wasmtime first enabled support for tail calls by default in Wasmtime 21.0.0, although that release contained a bug where it was only on-by-default for some configurations. In Wasmtime 22.0.0 tail calls were enabled by default for all configurations. The specific crash happens when an exported function in a WebAssembly module (or component) performs a `return_call` (or `return_call_indirect` or `return_call_ref`) to an imported host function which captures a stack trace (for example, the host function raises a trap). In this situation, the stack-walking code previously assumed there was always at least one WebAssembly frame on the stack but with tail calls that is no longer true. With the tail-call proposal it's possible to have an entry trampoline appear as if it directly called the exit trampoline. This situation triggers an internal assert in the stack-walking code which raises a Rust `panic!()`. When Wasmtime is compiled with Rust versions 1.80 and prior this means that an `extern "C"` function in Rust is raising a `panic!()`. This is technically undefined behavior and typically manifests as a process abort when the unwinder fails to unwind Cranelift-generated frames. When Wasmtime is compiled with Rust versions 1.81 and later this panic becomes a deterministic process abort. Overall the impact of this issue is that this is a denial-of-service vector where a malicious WebAssembly module or component can cause the host to crash. There is no other impact at this time other than availability of a service as the result of the crash is always a crash and no more. This issue was discovered by routine fuzzing performed by the Wasmtime project via Google's OSS-Fuzz infrastructure. We have no evidence that it has ever been exploited by an attacker in the wild. All versions of Wasmtime which have tail calls enabled by default have been patched: * 21.0.x - patched in 21.0.2 * 22.0.x - patched in 22.0.1 * 23.0.x - patched in 23.0.3 * 24.0.x - patched in 24.0.1 * 25.0.x - patched in 25.0.2. Wasmtime versions from 12.0.x (the first release with experimental tail call support) to 20.0.x (the last release with tail-calls off-by-default) have support for tail calls but the support is disabled by default. These versions are not affected in their default configurations, but users who explicitly enabled tail call support will need to either disable tail call support or upgrade to a patched version of Wasmtime. The main workaround for this issue is to disable tail support for tail calls in Wasmtime, for example with `Config::wasm_tail_call(false)`. Users are otherwise encouraged to upgrade to patched versions. | |||||