Total
4955 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-48787 | 1 Linux | 1 Linux Kernel | 2024-08-07 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: iwlwifi: fix use-after-free If no firmware was present at all (or, presumably, all of the firmware files failed to parse), we end up unbinding by calling device_release_driver(), which calls remove(), which then in iwlwifi calls iwl_drv_stop(), freeing the 'drv' struct. However the new code I added will still erroneously access it after it was freed. Set 'failure=false' in this case to avoid the access, all data was already freed anyway. | |||||
| CVE-2022-48791 | 1 Linux | 1 Linux Kernel | 2024-08-07 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix use-after-free for aborted TMF sas_task Currently a use-after-free may occur if a TMF sas_task is aborted before we handle the IO completion in mpi_ssp_completion(). The abort occurs due to timeout. When the timeout occurs, the SAS_TASK_STATE_ABORTED flag is set and the sas_task is freed in pm8001_exec_internal_tmf_task(). However, if the I/O completion occurs later, the I/O completion still thinks that the sas_task is available. Fix this by clearing the ccb->task if the TMF times out - the I/O completion handler does nothing if this pointer is cleared. | |||||
| CVE-2022-48792 | 1 Linux | 1 Linux Kernel | 2024-08-07 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix use-after-free for aborted SSP/STP sas_task Currently a use-after-free may occur if a sas_task is aborted by the upper layer before we handle the I/O completion in mpi_ssp_completion() or mpi_sata_completion(). In this case, the following are the two steps in handling those I/O completions: - Call complete() to inform the upper layer handler of completion of the I/O. - Release driver resources associated with the sas_task in pm8001_ccb_task_free() call. When complete() is called, the upper layer may free the sas_task. As such, we should not touch the associated sas_task afterwards, but we do so in the pm8001_ccb_task_free() call. Fix by swapping the complete() and pm8001_ccb_task_free() calls ordering. | |||||
| CVE-2022-48822 | 1 Linux | 1 Linux Kernel | 2024-08-07 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: usb: f_fs: Fix use-after-free for epfile Consider a case where ffs_func_eps_disable is called from ffs_func_disable as part of composition switch and at the same time ffs_epfile_release get called from userspace. ffs_epfile_release will free up the read buffer and call ffs_data_closed which in turn destroys ffs->epfiles and mark it as NULL. While this was happening the driver has already initialized the local epfile in ffs_func_eps_disable which is now freed and waiting to acquire the spinlock. Once spinlock is acquired the driver proceeds with the stale value of epfile and tries to free the already freed read buffer causing use-after-free. Following is the illustration of the race: CPU1 CPU2 ffs_func_eps_disable epfiles (local copy) ffs_epfile_release ffs_data_closed if (last file closed) ffs_data_reset ffs_data_clear ffs_epfiles_destroy spin_lock dereference epfiles Fix this races by taking epfiles local copy & assigning it under spinlock and if epfiles(local) is null then update it in ffs->epfiles then finally destroy it. Extending the scope further from the race, protecting the ep related structures, and concurrent accesses. | |||||
| CVE-2017-17973 | 1 Libtiff | 1 Libtiff | 2024-08-05 | 6.8 MEDIUM | 8.8 HIGH |
| In LibTIFF 4.0.8, there is a heap-based use-after-free in the t2p_writeproc function in tiff2pdf.c. NOTE: there is a third-party report of inability to reproduce this issue | |||||
| CVE-2018-13410 | 1 Info-zip Project | 1 Zip | 2024-08-05 | 7.5 HIGH | 9.8 CRITICAL |
| Info-ZIP Zip 3.0, when the -T and -TT command-line options are used, allows attackers to cause a denial of service (invalid free and application crash) or possibly have unspecified other impact because of an off-by-one error. NOTE: it is unclear whether there are realistic scenarios in which an untrusted party controls the -TT value, given that the entire purpose of -TT is execution of arbitrary commands | |||||
| CVE-2019-19770 | 1 Linux | 1 Linux Kernel | 2024-08-05 | 6.4 MEDIUM | 8.2 HIGH |
| In the Linux kernel 4.19.83, there is a use-after-free (read) in the debugfs_remove function in fs/debugfs/inode.c (which is used to remove a file or directory in debugfs that was previously created with a call to another debugfs function such as debugfs_create_file). NOTE: Linux kernel developers dispute this issue as not being an issue with debugfs, instead this is an issue with misuse of debugfs within blktrace | |||||
| CVE-2022-32317 | 1 Mplayerhq | 1 Mplayer | 2024-08-03 | 4.3 MEDIUM | 5.5 MEDIUM |
| The MPlayer Project v1.5 was discovered to contain a heap use-after-free resulting in a double free in the preinit function at libvo/vo_v4l2.c. This vulnerability can lead to a Denial of Service (DoS) via a crafted file. The device=strdup statement is not executed on every call. Note: This has been disputed by third parties as invalid and not reproduceable. | |||||
| CVE-2023-45322 | 1 Xmlsoft | 1 Libxml2 | 2024-08-02 | N/A | 6.5 MEDIUM |
| libxml2 through 2.11.5 has a use-after-free that can only occur after a certain memory allocation fails. This occurs in xmlUnlinkNode in tree.c. NOTE: the vendor's position is "I don't think these issues are critical enough to warrant a CVE ID ... because an attacker typically can't control when memory allocations fail." | |||||
| CVE-2023-29824 | 1 Scipy | 1 Scipy | 2024-08-02 | N/A | 9.8 CRITICAL |
| A use-after-free issue was discovered in Py_FindObjects() function in SciPy versions prior to 1.8.0. NOTE: the vendor and discoverer indicate that this is not a security issue. | |||||
| CVE-2024-38570 | 1 Linux | 1 Linux Kernel | 2024-08-01 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix potential glock use-after-free on unmount When a DLM lockspace is released and there ares still locks in that lockspace, DLM will unlock those locks automatically. Commit fb6791d100d1b started exploiting this behavior to speed up filesystem unmount: gfs2 would simply free glocks it didn't want to unlock and then release the lockspace. This didn't take the bast callbacks for asynchronous lock contention notifications into account, which remain active until until a lock is unlocked or its lockspace is released. To prevent those callbacks from accessing deallocated objects, put the glocks that should not be unlocked on the sd_dead_glocks list, release the lockspace, and only then free those glocks. As an additional measure, ignore unexpected ast and bast callbacks if the receiving glock is dead. | |||||
| CVE-2024-38583 | 1 Linux | 1 Linux Kernel | 2024-08-01 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free of timer for log writer thread Patch series "nilfs2: fix log writer related issues". This bug fix series covers three nilfs2 log writer-related issues, including a timer use-after-free issue and potential deadlock issue on unmount, and a potential freeze issue in event synchronization found during their analysis. Details are described in each commit log. This patch (of 3): A use-after-free issue has been reported regarding the timer sc_timer on the nilfs_sc_info structure. The problem is that even though it is used to wake up a sleeping log writer thread, sc_timer is not shut down until the nilfs_sc_info structure is about to be freed, and is used regardless of the thread's lifetime. Fix this issue by limiting the use of sc_timer only while the log writer thread is alive. | |||||
| CVE-2024-3169 | 1 Google | 1 Chrome | 2024-08-01 | N/A | 8.8 HIGH |
| Use after free in V8 in Google Chrome prior to 121.0.6167.139 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) | |||||
| CVE-2024-3171 | 1 Google | 1 Chrome | 2024-08-01 | N/A | 8.8 HIGH |
| Use after free in Accessibility in Google Chrome prior to 122.0.6261.57 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially exploit heap corruption via specific UI gestures. (Chromium security severity: Medium) | |||||
| CVE-2024-3170 | 1 Google | 1 Chrome | 2024-08-01 | N/A | 8.8 HIGH |
| Use after free in WebRTC in Google Chrome prior to 121.0.6167.85 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) | |||||
| CVE-2023-40088 | 1 Google | 1 Android | 2024-08-01 | N/A | 8.8 HIGH |
| In callback_thread_event of com_android_bluetooth_btservice_AdapterService.cpp, there is a possible memory corruption due to a use after free. This could lead to remote (proximal/adjacent) code execution with no additional execution privileges needed. User interaction is not needed for exploitation. | |||||
| CVE-2017-7264 | 1 Artifex | 1 Mupdf | 2024-08-01 | 6.8 MEDIUM | 7.8 HIGH |
| Use-after-free vulnerability in the fz_subsample_pixmap function in fitz/pixmap.c in Artifex MuPDF 1.10a allows remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact via a crafted document. | |||||
| CVE-2024-42075 | 1 Linux | 1 Linux Kernel | 2024-07-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix remap of arena. The bpf arena logic didn't account for mremap operation. Add a refcnt for multiple mmap events to prevent use-after-free in arena_vm_close. | |||||
| CVE-2024-42073 | 1 Linux | 1 Linux Kernel | 2024-07-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_buffers: Fix memory corruptions on Spectrum-4 systems The following two shared buffer operations make use of the Shared Buffer Status Register (SBSR): # devlink sb occupancy snapshot pci/0000:01:00.0 # devlink sb occupancy clearmax pci/0000:01:00.0 The register has two masks of 256 bits to denote on which ingress / egress ports the register should operate on. Spectrum-4 has more than 256 ports, so the register was extended by cited commit with a new 'port_page' field. However, when filling the register's payload, the driver specifies the ports as absolute numbers and not relative to the first port of the port page, resulting in memory corruptions [1]. Fix by specifying the ports relative to the first port of the port page. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0 Read of size 1 at addr ffff8881068cb00f by task devlink/1566 [...] Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0 mlxsw_devlink_sb_occ_snapshot+0x75/0xb0 devlink_nl_sb_occ_snapshot_doit+0x1f9/0x2a0 genl_family_rcv_msg_doit+0x20c/0x300 genl_rcv_msg+0x567/0x800 netlink_rcv_skb+0x170/0x450 genl_rcv+0x2d/0x40 netlink_unicast+0x547/0x830 netlink_sendmsg+0x8d4/0xdb0 __sys_sendto+0x49b/0x510 __x64_sys_sendto+0xe5/0x1c0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [...] Allocated by task 1: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 copy_verifier_state+0xbc2/0xfb0 do_check_common+0x2c51/0xc7e0 bpf_check+0x5107/0x9960 bpf_prog_load+0xf0e/0x2690 __sys_bpf+0x1a61/0x49d0 __x64_sys_bpf+0x7d/0xc0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x109/0x170 __kasan_slab_free+0x14/0x30 kfree+0xca/0x2b0 free_verifier_state+0xce/0x270 do_check_common+0x4828/0xc7e0 bpf_check+0x5107/0x9960 bpf_prog_load+0xf0e/0x2690 __sys_bpf+0x1a61/0x49d0 __x64_sys_bpf+0x7d/0xc0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | |||||
| CVE-2024-39496 | 1 Linux | 1 Linux Kernel | 2024-07-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix use-after-free due to race with dev replace While loading a zone's info during creation of a block group, we can race with a device replace operation and then trigger a use-after-free on the device that was just replaced (source device of the replace operation). This happens because at btrfs_load_zone_info() we extract a device from the chunk map into a local variable and then use the device while not under the protection of the device replace rwsem. So if there's a device replace operation happening when we extract the device and that device is the source of the replace operation, we will trigger a use-after-free if before we finish using the device the replace operation finishes and frees the device. Fix this by enlarging the critical section under the protection of the device replace rwsem so that all uses of the device are done inside the critical section. | |||||