Total
1413 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2018-6922 | 1 Freebsd | 1 Freebsd | 2019-10-09 | 5.0 MEDIUM | 5.3 MEDIUM |
| One of the data structures that holds TCP segments in all versions of FreeBSD prior to 11.2-RELEASE-p1, 11.1-RELEASE-p12, and 10.4-RELEASE-p10 uses an inefficient algorithm to reassemble the data. This causes the CPU time spent on segment processing to grow linearly with the number of segments in the reassembly queue. An attacker who has the ability to send TCP traffic to a victim system can degrade the victim system's network performance and/or consume excessive CPU by exploiting the inefficiency of TCP reassembly handling, with relatively small bandwidth cost. | |||||
| CVE-2018-1786 | 3 Ibm, Linux, Microsoft | 8 Spectrum Protect, Spectrum Protect For Virtual Environments Data Protection For Hyper-v, Spectrum Protect Manager For Virtual Environments Data Protection For Vmware and 5 more | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| IBM Spectrum Protect 7.1 and 8.1 dsmc and dsmcad processes incorrectly accumulate TCP/IP sockets in a CLOSE_WAIT state. This can cause TCP/IP resource leakage and may result in a denial of service. IBM X-Force ID: 148871. | |||||
| CVE-2018-1114 | 1 Redhat | 3 Undertow, Virtualization, Virtualization Host | 2019-10-09 | 4.0 MEDIUM | 6.5 MEDIUM |
| It was found that URLResource.getLastModified() in Undertow closes the file descriptors only when they are finalized which can cause file descriptors to exhaust. This leads to a file handler leak. | |||||
| CVE-2018-17898 | 1 Yokogawa | 8 Fcj, Fcj Firmware, Fcn-100 and 5 more | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
| Yokogawa STARDOM Controllers FCJ,FCN-100, FCN-RTU, FCN-500, All versions R4.10 and prior, The controller application fails to prevent memory exhaustion by unauthorized requests. This could allow an attacker to cause the controller to become unstable. | |||||
| CVE-2018-16853 | 1 Samba | 1 Samba | 2019-10-09 | 4.3 MEDIUM | 5.9 MEDIUM |
| Samba from version 4.7.0 has a vulnerability that allows a user in a Samba AD domain to crash the KDC when Samba is built in the non-default MIT Kerberos configuration. With this advisory the Samba Team clarify that the MIT Kerberos build of the Samba AD DC is considered experimental. Therefore the Samba Team will not issue security patches for this configuration. Additionally, Samba 4.7.12, 4.8.7 and 4.9.3 have been issued as security releases to prevent building of the AD DC with MIT Kerberos unless --with-experimental-mit-ad-dc is specified to the configure command. | |||||
| CVE-2018-15464 | 1 Cisco | 1 Asr 900 Series Software | 2019-10-09 | 5.0 MEDIUM | 5.8 MEDIUM |
| A vulnerability in Cisco 900 Series Aggregation Services Router (ASR) software could allow an unauthenticated, remote attacker to cause a partial denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient handling of certain broadcast packets ingress to the device. An attacker could exploit this vulnerability by sending large streams of broadcast packets to an affected device. If successful, an exploit could allow an attacker to impact services running on the device, resulting in a partial DoS condition. | |||||
| CVE-2018-14827 | 1 Rockwellautomation | 1 Rslinx | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| Rockwell Automation RSLinx Classic Versions 4.00.01 and prior. A remote, unauthenticated threat actor may intentionally send specially crafted Ethernet/IP packets to Port 44818, causing the software application to stop responding and crash. The user must restart the software to regain functionality. | |||||
| CVE-2018-14648 | 3 Debian, Fedoraproject, Redhat | 3 Debian Linux, 389 Directory Server, Enterprise Linux | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
| A flaw was found in 389 Directory Server. A specially crafted search query could lead to excessive CPU consumption in the do_search() function. An unauthenticated attacker could use this flaw to provoke a denial of service. | |||||
| CVE-2018-15396 | 1 Cisco | 1 Unity Connection | 2019-10-09 | 4.0 MEDIUM | 6.8 MEDIUM |
| A vulnerability in the Bulk Administration Tool (BAT) for Cisco Unity Connection could allow an authenticated, remote attacker to cause high disk utilization, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software does not restrict the maximum size of certain files that can be written to disk. An attacker who has valid administrator credentials for an affected system could exploit this vulnerability by sending a crafted, remote connection request to an affected system. A successful exploit could allow the attacker to write a file that consumes most of the available disk space on the system, causing application functions to operate abnormally and leading to a DoS condition. | |||||
| CVE-2018-15443 | 1 Cisco | 1 Firepower System Software | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass a configured Intrusion Prevention System (IPS) rule that inspects certain types of TCP traffic. The vulnerability is due to incorrect TCP retransmission handling. An attacker could exploit this vulnerability by sending a crafted TCP connection request through an affected device. A successful exploit could allow the attacker to bypass configured IPS rules and allow uninspected traffic onto the network. | |||||
| CVE-2018-13296 | 1 Synology | 1 Mailplus Server | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| Uncontrolled resource consumption vulnerability in TLS configuration in Synology MailPlus Server before 2.0.5-0606 allows remote attackers to conduct denial-of-service attacks via client-initiated renegotiation. | |||||
| CVE-2018-13994 | 1 Phoenixcontact | 58 Fl Switch 3004t-fx, Fl Switch 3004t-fx Firmware, Fl Switch 3004t-fx St and 55 more | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| The WebUI of PHOENIX CONTACT FL SWITCH 3xxx, 4xxx, 48xx versions 1.0 to 1.34 is vulnerable to a denial-of-service attack by making more than 120 connections. | |||||
| CVE-2018-13815 | 1 Siemens | 4 Simatic S7-1200, Simatic S7-1200 Firmware, Simatic S7-1500 and 1 more | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability has been identified in SIMATIC S7-1200 (All versions), SIMATIC S7-1500 (All Versions < V2.6). An attacker could exhaust the available connection pool of an affected device by opening a sufficient number of connections to the device. Successful exploitation requires an attacker to be able to send packets to port 102/tcp of the affected device. No user interaction and no user privileges are required to exploit the vulnerability. The vulnerability, if exploited, could cause a Denial-of-Service condition impacting the availability of the system. At the time of advisory publication no public exploitation of this vulnerability was known. | |||||
| CVE-2018-0410 | 1 Cisco | 1 Web Security Appliance | 2019-10-09 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the web proxy functionality of Cisco AsyncOS Software for Cisco Web Security Appliances could allow an unauthenticated, remote attacker to exhaust system memory and cause a denial of service (DoS) condition on an affected system. The vulnerability exists because the affected software improperly manages memory resources for TCP connections to a targeted device. An attacker could exploit this vulnerability by establishing a high number of TCP connections to the data interface of an affected device via IPv4 or IPv6. A successful exploit could allow the attacker to exhaust system memory, which could cause the system to stop processing new connections and result in a DoS condition. System recovery may require manual intervention. Cisco Bug IDs: CSCvf36610. | |||||
| CVE-2018-0441 | 1 Cisco | 1 Access Points | 2019-10-09 | 6.1 MEDIUM | 7.4 HIGH |
| A vulnerability in the 802.11r Fast Transition feature set of Cisco IOS Access Points (APs) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a corruption of certain timer mechanisms triggered by specific roaming events. This corruption will eventually cause a timer crash. An attacker could exploit this vulnerability by sending malicious reassociation events multiple times to the same AP in a short period of time, causing a DoS condition on the affected AP. | |||||
| CVE-2018-10632 | 1 Moxa | 6 Nport 5210, Nport 5210 Firmware, Nport 5230 and 3 more | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| In Moxa NPort 5210, 5230, and 5232 versions 2.9 build 17030709 and prior, the amount of resources requested by a malicious actor are not restricted, allowing for a denial-of-service condition. | |||||
| CVE-2018-0372 | 1 Cisco | 20 Nexus 92160yc-x, Nexus 92304qc, Nexus 9236c and 17 more | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the DHCPv6 feature of the Cisco Nexus 9000 Series Fabric Switches in Application-Centric Infrastructure (ACI) Mode could allow an unauthenticated, remote attacker to cause the device to run low on system memory, which could result in a Denial of Service (DoS) condition on an affected system. The vulnerability is due to improper memory management when DHCPv6 packets are received on an interface of the targeted device. An attacker could exploit this vulnerability by sending a high number of malicious DHCPv6 packets to be processed by an affected device. A successful exploit could allow the attacker to cause the system to run low on memory, which could cause an eventual reboot of an affected device. The vulnerability only applies to IPv6 protocol packets and not for IPv4 protocol packets. This vulnerability affects Cisco Nexus 9000 Series Fabric Switches in ACI Mode running software version 13.0(1k). The vulnerability can only be exploited when unicast routing is enabled on the Bridge Domain (BD). DHCP and DHCP relay do not have to be configured for the vulnerability to be exploited. Cisco Bug IDs: CSCvg38918. | |||||
| CVE-2018-0061 | 1 Juniper | 8 Ex2300, Ex3400, Junos and 5 more | 2019-10-09 | 5.0 MEDIUM | 5.3 MEDIUM |
| A denial of service vulnerability in the telnetd service on Junos OS allows remote unauthenticated users to cause high CPU usage which may affect system performance. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D81 on SRX Series; 12.3 versions prior to 12.3R12-S11; 12.3X48 versions prior to 12.3X48-D80 on SRX Series; 15.1 versions prior to 15.1R7; 15.1X49 versions prior to 15.1X49-D150, 15.1X49-D160 on SRX Series; 15.1X53 versions prior to 15.1X53-D59 on EX2300/EX3400 Series; 15.1X53 versions prior to 15.1X53-D68 on QFX10K Series; 15.1X53 versions prior to 15.1X53-D235 on QFX5200/QFX5110 Series; 15.1X53 versions prior to 15.1X53-D495 on NFX Series; 16.1 versions prior to 16.1R4-S12, 16.1R6-S6, 16.1R7; 16.2 versions prior to 16.2R2-S7, 16.2R3; 17.1 versions prior to 17.1R2-S9, 17.1R3; 17.2 versions prior to 17.2R2-S6, 17.2R3; 17.2X75 versions prior to 17.2X75-D100; 17.3 versions prior to 17.3R2-S4, 17.3R3; 17.4 versions prior to 17.4R1-S5, 17.4R2; 18.2X75 versions prior to 18.2X75-D5. | |||||
| CVE-2018-0094 | 1 Cisco | 1 Unified Computing System Central Software | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in IPv6 ingress packet processing for Cisco UCS Central Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high CPU utilization on the targeted device. The vulnerability is due to insufficient rate limiting protection for IPv6 ingress traffic. An attacker could exploit this vulnerability by sending the affected device a high rate of IPv6 packets. Successful exploitation could allow the attacker to cause a DoS condition due to CPU and resource constraints. Cisco Bug IDs: CSCuv34544. | |||||
| CVE-2018-0029 | 1 Juniper | 6 Ex2300, Ex3400, Junos and 3 more | 2019-10-09 | 6.1 MEDIUM | 6.5 MEDIUM |
| While experiencing a broadcast storm, placing the fxp0 interface into promiscuous mode via the 'monitor traffic interface fxp0' can cause the system to crash and restart (vmcore). This issue only affects Junos OS 15.1 and later releases, and affects both single core and multi-core REs. Releases prior to Junos OS 15.1 are unaffected by this vulnerability. Affected releases are Juniper Networks Junos OS: 15.1 versions prior to 15.1F6-S11, 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1X49 versions prior to 15.1X49-D140; 15.1X53 versions prior to 15.1X53-D59 on EX2300/EX3400; 15.1X53 versions prior to 15.1X53-D67 on QFX10K; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110; 15.1X53 versions prior to 15.1X53-D471, 15.1X53-D490 on NFX; 16.1 versions prior to 16.1R3-S8, 16.1R5-S4, 16.1R6-S1, 16.1R7; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R1-S7, 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S6, 17.2R2-S4, 17.2R3; 17.2X75 versions prior to 17.2X75-D90, 17.2X75-D110; 17.3 versions prior to 17.3R1-S4, 17.3R2; 17.4 versions prior to 17.4R1-S3, 17.4R2. | |||||