Total
11965 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-29486 | 1 Intel | 1 Hyperscan | 2025-02-05 | N/A | 9.8 CRITICAL |
| Improper buffer restrictions in the Hyperscan library maintained by Intel(R) all versions downloaded before 04/29/2022 may allow an unauthenticated user to potentially enable escalation of privilege via network access. | |||||
| CVE-2022-32569 | 1 Intel | 4 Nuc M15 Laptop Kit Lapbc510, Nuc M15 Laptop Kit Lapbc510 Firmware, Nuc M15 Laptop Kit Lapbc710 and 1 more | 2025-02-05 | N/A | 6.7 MEDIUM |
| Improper buffer restrictions in BIOS firmware for some Intel(R) NUC M15 Laptop Kits before version BCTGL357.0074 may allow a privileged user to potentially enable escalation of privilege via local access. | |||||
| CVE-2022-26045 | 1 Intel | 2 Xmm 7560, Xmm 7560 Firmware | 2025-02-05 | N/A | 7.2 HIGH |
| Improper buffer restrictions in some Intel(R) XMM(TM) 7560 Modem software before version M2_7560_R_01.2146.00 may allow a privileged user to potentially enable escalation of privilege via physical access. | |||||
| CVE-2022-26124 | 1 Intel | 8 Nuc 8 Rugged Board Nuc8cchbn, Nuc 8 Rugged Board Nuc8cchbn Firmware, Nuc 8 Rugged Kit Nuc8cchkr and 5 more | 2025-02-05 | N/A | 7.8 HIGH |
| Improper buffer restrictions in BIOS firmware for some Intel(R) NUC Boards, Intel(R) NUC 8 Boards, Intel(R) NUC 8 Rugged Boards and Intel(R) NUC 8 Rugged Kits before version CHAPLCEL.0059 may allow a privileged user to potentially enable escalation of privilege via local access. | |||||
| CVE-2024-49840 | 1 Qualcomm | 20 Fastconnect 6900, Fastconnect 6900 Firmware, Fastconnect 7800 and 17 more | 2025-02-05 | N/A | 7.8 HIGH |
| Memory corruption while Invoking IOCTL calls from user-space to validate FIPS encryption or decryption functionality. | |||||
| CVE-2024-45573 | 1 Qualcomm | 48 Fastconnect 6700, Fastconnect 6700 Firmware, Fastconnect 6900 and 45 more | 2025-02-05 | N/A | 7.8 HIGH |
| Memory corruption may occour while generating test pattern due to negative indexing of display ID. | |||||
| CVE-2024-45584 | 1 Qualcomm | 248 Ar8035, Ar8035 Firmware, Fastconnect 6200 and 245 more | 2025-02-05 | N/A | 7.8 HIGH |
| Memory corruption can occur when a compat IOCTL call is followed by a normal IOCTL call from userspace. | |||||
| CVE-2023-30088 | 1 Cesanta | 1 Mjs | 2025-01-29 | N/A | 5.5 MEDIUM |
| An issue found in Cesanta MJS v.1.26 allows a local attacker to cause a denial of service via the mjs_execute function in mjs.c. | |||||
| CVE-2023-29932 | 1 Llvm | 1 Llvm | 2025-01-29 | N/A | 5.5 MEDIUM |
| llvm-project commit fdbc55a5 was discovered to contain a segmentation fault via the component mlir::IROperand<mlir::OpOperand. | |||||
| CVE-2023-26285 | 1 Ibm | 1 Mq Appliance | 2025-01-29 | N/A | 5.9 MEDIUM |
| IBM MQ 9.2 CD, 9.2 LTS, 9.3 CD, and 9.3 LTS could allow a remote attacker to cause a denial of service due to an error processing invalid data. IBM X-Force ID: 248418. | |||||
| CVE-2022-47488 | 2 Google, Unisoc | 14 Android, S8000, Sc7731e and 11 more | 2025-01-28 | N/A | 4.4 MEDIUM |
| In spipe drive, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service with System execution privileges needed. | |||||
| CVE-2023-6549 | 1 Citrix | 2 Netscaler Application Delivery Controller, Netscaler Gateway | 2025-01-27 | N/A | 7.5 HIGH |
| Improper Restriction of Operations within the Bounds of a Memory Buffer in NetScaler ADC and NetScaler Gateway allows Unauthenticated Denial of Service and Out-Of-Bounds Memory Read | |||||
| CVE-2017-6740 | 1 Cisco | 2 Ios, Ios Xe | 2025-01-27 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve66601. | |||||
| CVE-2017-6739 | 1 Cisco | 2 Ios, Ios Xe | 2025-01-27 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve66540. | |||||
| CVE-2017-6738 | 1 Cisco | 2 Ios, Ios Xe | 2025-01-27 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve89865, CSCsy56638. | |||||
| CVE-2017-6742 | 1 Cisco | 2 Ios, Ios Xe | 2025-01-27 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve54313. | |||||
| CVE-2017-6737 | 1 Cisco | 2 Ios, Ios Xe | 2025-01-27 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve60402. | |||||
| CVE-2017-6736 | 1 Cisco | 2 Ios, Ios Xe | 2025-01-27 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve57697. | |||||
| CVE-2018-0151 | 1 Cisco | 1 Ios Xe | 2025-01-27 | 10.0 HIGH | 9.8 CRITICAL |
| A vulnerability in the quality of service (QoS) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges. The vulnerability is due to incorrect bounds checking of certain values in packets that are destined for UDP port 18999 of an affected device. An attacker could exploit this vulnerability by sending malicious packets to an affected device. When the packets are processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to execute arbitrary code on the affected device with elevated privileges. The attacker could also leverage this vulnerability to cause the device to reload, causing a temporary DoS condition while the device is reloading. The malicious packets must be destined to and processed by an affected device. Traffic transiting a device will not trigger the vulnerability. Cisco Bug IDs: CSCvf73881. | |||||
| CVE-2017-6744 | 1 Cisco | 1 Ios | 2025-01-27 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. | |||||